Gravity in calculations: near Earth, g ≈ 9.8 m/s² (9.8 N/kg). Use the value supplied by the question, page instructions or activity; use 10 when it is specified.
Track the vibration, translate particles into pressure and traces, draw the full sound path, then decide whether the journey is one-way or out-and-back.
Core sound foundationsCompression & mediaUltrasound applicationsSafe sound ATP
One sound can be shown as particle spacing, pressure variation or a microphone trace.
1
Vibration starts the story
Producing sound
A vacuum cannot transmit ordinary sound because there are no particles to pass on the disturbance.
Air does not flow continuously from a loudspeaker to a listener.
A loudspeaker cone moves backwards and forwards, creating a travelling disturbance in nearby air.After a tuning fork is struck gently, its prongs vibrate and make the surrounding air oscillate.A stretched string vibrates; its motion is passed to the surrounding medium and instrument body.The source does not fire air particles across the room; each particle oscillates near its equilibrium position.
Sound is produced by a vibrating source. The source pushes nearby particles together, then pulls away. Neighbouring particles pass the disturbance onward, so energy travels while the material itself has no net journey from source to listener.
MnemonicVIBRATE → DISTURB → TRANSFER
Source vibrates, nearby particles are disturbed, and energy is transferred through the medium.
Examiner wording: “The loudspeaker cone vibrates” is the production mark. “It makes a noise” only repeats the question.
Matter trap: particles oscillate about equilibrium positions. They do not travel from the speaker to the ear with the wave.
Quick Check · Why does damping the source stop a continuing sound?
Damping reduces and then stops the source vibration, so it can no longer create continuing compressions and rarefactions.
Pause · explain it yourself
Why can light reach Earth across space while sound cannot?
Compare, then improve
Light propagates through a vacuum; ordinary sound requires a material medium.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
2
Parallel is the scoring word
Compressions and rarefactions
A vibrating source pushes adjacent particles together, then lets them spread apart.
Compressions and rarefactions travel while particles oscillate about their positions.
Sound is longitudinal: particle vibration is parallel to propagation.
Both red particle-motion arrows and the blue propagation arrow lie along the same line.Crowded and spread-out regions move through the medium while individual particles oscillate locally.The repeating particle pattern contains compressions and rarefactions.A cone alternately pushes and pulls, launching a longitudinal wave.
longitudinal means particle vibration $\parallel$ direction of wave propagation
Interactive · Direction decoder
Compare vibration with propagation
Feature
What happens in sound?
Examiner language
particles
oscillate backwards and forwards
about equilibrium positions
vibration direction
along the direction of travel
parallel
energy
passes through the medium
transferred without net matter transfer
MnemonicLONG = ALONG
In a longitudinal sound wave, particles vibrate along the line of propagation.
Diagram trap: an oscilloscope line goes up and down because a measured value is plotted vertically. It is not a path followed by air particles.
Quick Check · Which arrow must be double-headed?
The particle-motion arrow: particles vibrate backwards and forwards. The propagation arrow shows the one direction in which the disturbance travels.
3
Particles · pressure · trace
Representing sound waves
A pressure-versus-distance curve is a graph, not a literal sideways particle path.
Compression centre to the next compression centre is one wavelength.A pressure peak is a compression centre; a pressure trough is a rarefaction centre.The same repeating pattern can be encoded using spacing, pressure or microphone voltage.On a distance graph, one horizontal repeat is one wavelength.
Compression
Particles are closer together. Density and pressure are above the undisturbed values.
Rarefaction
Particles are further apart. Density and pressure are below the undisturbed values.
$\lambda =$ centre of one compression to centre of the next compression
Interactive · Representation translator
Select a location in the pressure cycle
Decide whether the horizontal axis is distance or time.
For distance: one repeat is wavelength $\lambda$.
For a time trace, frequency is the number of complete cycles per second; count several cycles over a measured interval.
On a particle strip, measure between repeating centres—not edges.
If several wavelengths are shown, divide the total length by the number of intervals.
Worked pattern count
The distance from compression 1 to compression 5 contains four wavelengths, not five. If the distance is $3.2$ m, then $\lambda=3.2/4=0.80$ m.
Half-wavelength trap: compression centre to the neighbouring rarefaction centre is $\lambda/2$, not one wavelength.
Quick Check · What does a pressure peak show?
The centre of a compression: particles are crowded and pressure/density are above normal.
4
20 Hz · 20 kHz · matter required
The hearing range
The approximate human range is bounded by 20 Hz and 20 kHz.As air is removed, microphone output falls even though the buzzer is still visibly vibrating.In general, the same sound covers equal distances fastest in a solid, then a liquid, then a gas.Read the route, quantity and units before choosing an equation.
Interactive · Hearing gate
Classify the frequency
Situation
Observation
Valid inference
buzzer in jar; air removed
sound level decreases while source still vibrates
sound requires a medium
equal path through solid/liquid/gas
arrival times differ
sound speed depends on medium
$f>20$ kHz
not heard by healthy human
frequency is ultrasound
Mnemonic20 TO 20K · MATTER MAKES THE LINK
Human hearing is about 20 Hz-20 kHz; sound needs solid, liquid or gas particles.
Bell-jar conclusion: write “sound needs a medium.” Do not write “the buzzer stops”—the visual evidence says it continues to vibrate.
Boundary trap: ultrasound is defined by frequency, not amplitude. “Too high-pitched” is useful only when linked to frequency above 20 kHz.
Quick Check · Is 20 kHz itself greater than 20 kHz?
No. The course definition uses greater than 20 kHz for ultrasound. In calculations and classification, read the inequality exactly.
5
Route first · units second · equation third
Measuring sound speed
In ordinary air its speed is approximately 330–350 m/s.
Sound generally travels faster in solids than liquids and faster in liquids than gases.
In a visual-cue method, light arrival is effectively immediate compared with sound.A data logger measures the arrival-time difference between two microphones.The wave equation works in every medium when the speed for that medium is used.General order: solid > liquid > gas. In air, sound is approximately 330–350 m/s.Read the route, quantity and units before choosing an equation.
Use $v=f\lambda$ when frequency or wavelength is involved.
Check air answers against about $330$-$350$ m/s.
Worked compression spacing
Compression 1 to compression 4 measures $2.55$ m, so there are three wavelengths: $\lambda=2.55/3=0.85$ m. At $340$ m/s, $f=v/\lambda=400$ Hz.
Speed orderSOLID SPRINTS · LIQUID LEADS · GAS GOES SLOWEST
When a wave changes medium, source frequency stays fixed; speed and wavelength may change.
Safe timing source: use a wooden clapper or low-volume speaker, never an explosive source. Keep the source away from ears and use electronic timing where possible.
Boundary trap: entering a new medium does not change the frequency set by the source. If speed increases, wavelength increases.
Quick Check · Why does a longer baseline improve manual timing?
It produces a longer travel time, making the fixed reaction-time uncertainty a smaller percentage of the measured interval.
Pause · explain it yourself
Why is microphone separation divided by one-way time in a two-microphone experiment?
Compare, then improve
The measured delay is travel from one microphone to the other, rather than a trip out and back.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
6
Amplitude controls loudness · frequency controls pitch
Pitch, loudness and traces
Pitch depends on frequency: more oscillations per second gives higher pitch.
Loudness relates to amplitude: larger pressure variations usually sound louder.
Changing amplitude need not change frequency or propagation speed.
Before comparing oscilloscope traces, read time-per-division and voltage-per-division settings.
More complete cycles in the same actual time means higher frequency.
Greater height at the same gain indicates greater amplitude.
Different display scales can make physically equal signals look different.
A claim about pitch must therefore use time information, not merely trace height.
Same cycle count means same frequency; larger amplitude means louder.Same amplitude means same loudness; more cycles per time means higher pitch.Count complete cycles in a measured time interval; convert milliseconds to seconds before dividing cycles by time.Read the route, quantity and units before choosing an equation.
Five cycles take $12.5$ ms. $f=N/t=5/(12.5\times10^{-3})=400$ Hz. Counting several cycles reduces the percentage reading uncertainty.
MnemonicAMPLITUDE ANNOUNCES LOUDNESS · FREQUENCY FIXES PITCH
Speed is not the loudness or pitch control.
Scale trap: never compare drawn heights or cycle counts until the vertical sensitivity and timebase are confirmed equal.
Quick Check · Quieter and higher pitched: what changes?
Amplitude decreases and frequency increases.
Pause · explain it yourself
Two traces on the same time scale show twice as many cycles in one. Compare frequency.
Compare, then improve
The trace with twice as many cycles has twice the frequency and a higher pitch.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
7
Reflection · out and back
Echoes
An echo is reflected sound.
The interval from emission to returning echo includes outward and return paths, so distance to the reflector is vt/2.
A direct two-microphone measurement is different: use microphone separation and one-way timing difference without automatically halving.
An echo is reflected sound that returns after the original sound.The time interval is measured from the transmitted pulse to its returning echo.Soft porous surfaces absorb more sound, so the returning pulse is weaker.Read the route, quantity and units before choosing an equation.
distance to reflector $d=\dfrac{vt}{2}$ · echo time $t=\dfrac{2d}{v}$
Interactive · Echo calculator
Find one-way distance
Locate source/detector and reflecting surface.
Draw OUT and BACK arrows.
Decide whether the stated distance is one-way or already total.
Use the speed in the medium carrying the sound.
Check that a longer delay gives a larger distance.
Worked wording contrast
If a wall is $102$ m away, the pulse travels $204$ m in total. At $340$ m/s, $t=204/340=0.60$ s. If the question already states “total path $204$ m,” do not double it again.
MnemonicOUT + BACK = DOUBLE TRACK
The factor of two belongs to the route, not automatically to every sound calculation.
Definition: “an echo is a reflection of sound” is enough. The calculation marks then depend on showing the total path clearly.
Double-division trap: if a question gives the total distance travelled, use it directly in $t=d/v$.
Quick Check · What does $vt$ give for an echo?
It gives the total out-and-back path. Divide by two only when the question asks for the one-way distance to the reflector.
8
Pulse · reflect · time · locate
Ultrasound
Ultrasound is sound above 20 kHz, beyond the approximate human hearing range of 20 Hz to 20 kHz.
Reflections support sonar, soft-tissue scanning and non-destructive testing.
Use speed in the actual medium, not automatically the air value.
Identify which boundary produced the pulse before interpreting its time.
The three required applications are medical soft-tissue scanning, non-destructive testing and sonar.Tissue boundaries return partial echoes at different times and amplitudes.A flaw creates an earlier echo before the pulse reaches the far face of the component.Sonar can locate a target or seabed by timing a return pulse through water.Ultrasound has frequency greater than the upper human audible limit.
A return takes $0.40$ s in water at $1500$ m/s. Depth $=(1500)(0.40)/2=300$ m.
MnemonicPULSE → REFLECT → TIME → LOCATE
The same reasoning chain powers all three applications.
Medical wording: diagnostic ultrasound is non-ionising and is used under controlled medical conditions. Avoid the absolute claim that any exposure is automatically harmless.
Speed trap: sonar needs the speed in water; NDT needs the speed in the solid; scanning uses the relevant tissue speed—not $340$ m/s unless the pulse is in air.
Quick Check · Why does a flaw echo arrive before a far-face echo?
The flaw is a nearer reflecting boundary, so the pulse travels a shorter out-and-back distance.
9
Alternative to Practical
ATP Lab Lens: make timing electronic, sound levels moderate and variables measurable
Two microphones and a data logger measure a travel-time difference without human reaction time.A long visual-cue baseline is valid when electronic microphones are unavailable.Keep geometry fixed and compare traces using the same oscilloscope scales.Measure the echo delay for several reflector distances; the pulse travels out and back.
Use at least five useful numerical settings for a continuous variable, repeat each, calculate means, identify anomalies and label table headings with units.
Evaluation quality
Link every weakness to a fix: “echoes contaminate the first pulse, so work in an open area or select the first arrival on the trace.”
Safety: use low-voltage apparatus and moderate sound levels; keep sources away from ears, switch off before changing connections, secure cables and movable reflectors, and use only supervised demonstration equipment.
Objective measurement: use microphone voltage and cycle counts for quantitative evidence; keep any listening comparison at a moderate sound level.
Control trap: change one source setting at a time. Keep source–microphone geometry fixed, and use identical oscilloscope scales when traces are compared.
Quick Check · Why repeat at each setting?
Repeats reveal anomalous readings and a mean reduces random variation from timing, background noise and positioning.
10
Last-minute examiner sheet
Sound Master Technique Sheet
Particles, pressure and traces are different views of one sound.Lock the required boundary values: 20 Hz and 20 kHz.Keep the route, medium and units beside the equation.Draw both legs before using an echo time.All three ultrasound uses follow pulse-reflect-time-locate.Electronic timing and a long baseline produce stronger speed evidence.
Representation audit
Arrow directions → particle spacing → pressure → distance or time axis → repeating interval.
Calculation audit
Medium → route → SI units → equation → factor of two → sensible answer and unit.
$v=d/t$ · $v=f\lambda$ · frequency $=$ complete cycles / time · echo/sonar depth $=vt/2$
Final chainVIBRATE · PARALLEL · TRANSLATE · ROUTE · REFLECT
These five decisions unlock the recurring Sound questions.
Final check · A wave enters a faster medium. What stays fixed?
The frequency set by the source stays fixed. The speed increases and therefore the wavelength increases.
Interactive mastery: 0 / 8 explored
Explore all eight checkpoints, then use the independent Practice and Exam Arena banks.