Gravity in calculations: near Earth, g ≈ 9.8 m/s² (9.8 N/kg). Use the value supplied by the question, page instructions or activity; use 10 when it is specified.
Track what travels, read the diagram like an examiner, measure over several cycles, then use $v=f\lambda$ and the wavefront rules to predict every pattern.
Core wave languageWave equationSupplement diffractionRipple-tank ATP
Three boundary patterns, one wave-language toolkit.
1
The idea underneath every wave
Energy transfer by waves
A crest can travel along a rope while each small rope section oscillates around equilibrium.
Energy travels without continuous bulk transport of the rope.
A wave is a travelling disturbance that transfers energy from place to place. It does not carry the material of the medium along with the disturbance.
Follow one marker: it moves locally while the pulse moves on.In a transverse wave, vibration is perpendicular to propagation.Count many cycles in a measured time to reduce percentage uncertainty.Use the labelled data with the question.
MnemonicWAVE GOES · WATER WIGGLES
The pattern moves on; each small part of the medium returns.
Examiner sentence: “The wave transfers energy, while particles oscillate about equilibrium with no net transfer of matter.”
Language trap: do not write “particles do not move.” They do move—back and forth or up and down—but do not travel overall with the wave.
2
Name it before calculating it
Wave language
A displacement–distance profile: amplitude is vertical; wavelength is horizontal.Crest-to-trough height is twice the amplitude.In plan view, adjacent crest wavefronts are one wavelength apart.Circular wavefronts still join points at the same stage of the wave.
Profile language
Crest/peak: maximum positive displacement. Trough: maximum negative displacement. Amplitude $A$: maximum displacement from equilibrium.
Repeat language
Wavelength $\lambda$: shortest separation of adjacent points at the same stage of the repeating wave. Wavefront: line joining points at the same stage of oscillation.
Half-cycle trap: crest to adjacent trough is $\lambda/2$ horizontally and $2A$ vertically.
3
Measure long · count intervals · divide
Amplitude and wavelength
AmplitudeMaximum displacement from equilibrium, not total crest-to-trough height.
WavelengthDistance between consecutive points in phase, such as adjacent crests or compression centres.
A wavefront joins points in the same phase.
Show separate arrows for particle vibration and propagation to make the model clear.
Measure several complete wavelengths, then divide.Count many cycles in a measured time to reduce percentage uncertainty.Distance axis: horizontal repeat gives wavelength.
Choose two well-defined corresponding points far apart, such as crest to crest.
Count the intervals, not just the visible crests.
Measure perpendicular to wavefronts and read the scale at eye level.
Divide the total by the number of wavelengths.
Repeat at several positions and average.
Record
Measure
Process
distance profile
several complete wavelengths
$\lambda=\text{total distance}/N$
timing record
$N$ complete oscillations in time $t$
$f=N/t$
ATP precision: a 2 mm ruler uncertainty is large for one tiny wavelength but much smaller as a percentage when spread across five or ten wavelengths.
Crest count trap: six crests from first to last contain five complete crest-to-crest intervals.
4
Units first · equation second
Frequency, period and wave speed
FrequencyComplete oscillations per second in hertz; period is time per oscillation.
A wave moves one wavelength during one period, giving v = fλ.
A displacement–distance graph shows wavelength, while a displacement–time graph at one position shows period.
Similar-looking curves therefore contain different information.
FrequencySet by the source; speed depends on medium and wave type.
Read horizontal units and convert lengths before calculating.
An amplitude change alone need not change frequency, speed or wavelength in the ideal model.
Cover the required quantity to select the rearrangement.
Use the labelled data with the question.Extract the spatial repeat before substituting.Count many cycles in a measured time to reduce percentage uncertainty.
Interactive · Wave Equation Lab
Calculate wave speed
Three-mark calculation rhythm
Convert: $6.0\text{ cm}=0.060\text{ m}$.
Substitute: $v=(8.0)(0.060)$.
Finish: $v=0.48\text{ m/s}$.
MnemonicV = FREQUENCY × LENGTH
Then sense-check: at fixed speed, a higher frequency must mean a shorter wavelength.
Unit traps: cm ÷ 100, mm ÷ 1000, kHz × 1000, and waves per minute ÷ 60.
Pause · explain it yourself
What happens to wavelength if frequency doubles at fixed wave speed?
Compare, then improve
It halves because λ = v/f.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
5
Compare two arrows
Transverse and longitudinal waves
For a transverse wave, vibration is perpendicular to propagation; for longitudinal, it is parallel.
In a transverse wave, vibration is perpendicular to propagation.Compressions and rarefactions travel while coils oscillate parallel to propagation.Compare vibration direction with propagation direction.Use the labelled data with the question.
MnemonicT = ACROSS · L = ALONG
Transverse vibration goes across the travel line; longitudinal vibration goes along it.
Longitudinal wavelength: measure compression-centre to next compression-centre, or rarefaction-centre to next rarefaction-centre.
Water-wave scope: in this topic, surface water waves are modelled as transverse. Do not replace the required model with a more advanced particle-orbit discussion.
Pause · explain it yourself
How do vibration directions differ in transverse and longitudinal waves?
Compare, then improve
Perpendicular to propagation for transverse, parallel for longitudinal.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
6
Same medium · new direction
Reflection
Reflection redirects waves at a boundary.
Incident and reflected propagation directions are symmetric about the normal.Construction task: continue equally spaced reflected fronts.Wavefronts remain perpendicular to their propagation arrows.Use the labelled data with the question.
Draw a normal at the contact point.
Reflect the propagation direction symmetrically about the normal.
Draw straight wavefronts perpendicular to that direction.
Keep the incident wavelength spacing.
MnemonicREFLECT = REDIRECT
No medium change means no speed or wavelength change.
Drawing trap: reflected wavefronts do not crowd together at the barrier; keep them parallel and equally spaced.
7
Speed change at a boundary
Refraction
Refraction follows a change of speed; direction can change at oblique incidence.
Frequency stays the same across a boundary, so lower speed gives shorter wavelength.
In a ripple tank, shallower water slows water waves.
At normal incidence, refraction can change speed without changing direction.
Deep to shallow: slower waves, closer fronts and bending towards the normal.Normal incidence: spacing changes but the travel direction does not.Use the labelled data with the question.Use the labelled data with the question.
source fixes $f$ · medium fixes $v$ · then $\lambda=v/f$
MnemonicSLOWER → SHORTER → TOWARDS
For water waves entering shallow water: speed down, wavelength down, bend towards the normal.
Cause: refraction happens because wave speed changes. Turning is a possible result, not the definition.
Normal-incidence trap: no turning does not mean no refraction. Speed and wavelength still change at the depth boundary.
8
Relative size controls spreading
Diffraction
Diffraction is spreading at an edge or through a gap.
It is stronger when a gap is comparable to wavelength.
For a fixed gap, longer wavelengths spread more; for fixed wavelength, reducing a very wide gap towards that wavelength increases spreading.
A narrow opening produces strongly curved outgoing fronts.A wide opening gives mostly straight fronts with edge curvature.The relative sizes of wavelength and opening control the spreading.At an obstacle edge, part of each wavefront spreads into the shadow region.
greater diffraction ⇔ larger $\dfrac{\lambda}{\text{gap or obstacle scale}}$
Interactive · Diffraction Ratio
Change the gap width
Change
$\lambda/$gap
Spreading
narrower gap
increases
increases
longer wavelength
increases
increases
wider gap
decreases
decreases
MnemonicSIZE MATCH → BIG SPREAD
Pronounced diffraction occurs when wavelength is comparable with or larger than the opening.
Same-medium audit: diffraction changes front shape and directions; frequency, speed and wavelength remain unchanged.
Absolute-rule trap: diffraction is not an on/off event only at exact equality. It increases continuously as wavelength becomes larger relative to the gap or edge scale.
Pause · explain it yourself
Why do long waves spread more than short waves through the same opening?
Compare, then improve
The opening is smaller relative to the longer wavelength, making diffraction more pronounced.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
9
Alternative to Practical
Ripple-tank answers need method, measurement, controls and a clean pattern
A ripple tank makes water-wave patterns visible for measurement.Use one controlled change and a fixed observation method.Reflection setup: barrier at an angle to straight incident fronts.Refraction setup: an oblique shallow-plate boundary.Diffraction test: change gap width while holding wavelength fixed.
Reliable wavelength
Photograph a steady pattern. Measure perpendicular to the fronts over at least five wavelengths, divide, repeat and average.
Reliable frequency
Count many waves in a timed interval or use a calibrated generator. Write $f=N/t$.
Investigation
Independent variable
Keep constant
Observe
refraction
water depth
source frequency
spacing / direction
gap diffraction
gap width or wavelength
the other, depth
curvature / spread angle
reflection
barrier orientation
depth and frequency
front directions
Safety: use low-voltage school equipment, keep water away from electrical connections, dry spills promptly and switch off before moving the dipper, plate or barriers.
Evaluation pattern: name the measurement problem, say how it affects the result, then give a specific improvement—“photograph and measure across many fronts” is stronger than “be more careful.”
10
Last-minute examiner sheet
General Properties of Waves Master Sheet
Profile decoder: amplitude vertical, wavelength horizontal.Cover the required quantity to select the rearrangement.Compare vibration direction with propagation direction.Identify the process from the boundary and wavefront pattern.Use the labelled data with the question.
Definitions worth exact wording
Amplitude: maximum displacement from equilibrium. Frequency: complete oscillations per second. Wavelength: shortest distance between adjacent points at the same stage of the repeating wave. Wavefront: line joining points at the same stage of oscillation.
Calculation route
Convert → choose $v=f\lambda$ → substitute → unit → sense-check.
Drawing route
Direction first → fronts perpendicular → equal spacing → smooth pattern.
Final stripENERGY, NOT MATTER · A FROM AXIS · $v=f\lambda$ · ⟂ / ∥ · R-R-D