2.3 — Thermal Energy Transfer
Gravity in calculations: near Earth, g ≈ 9.8 m/s² (9.8 N/kg). Use the value supplied by the question, page instructions or activity; use 10 when it is specified.
Track what moves: energy, particles, or neither?
Ways of transferring thermal energy
Net thermal energy transfer is from a region at higher temperature to one at lower temperature until conditions move towards equilibrium.
| Mechanism | What moves? | Where? |
|---|---|---|
| Conduction | energy passes between particles; no bulk flow of the solid | all solids; also possible in fluids |
| Convection | the fluid itself moves | liquids and gases only |
| Thermal radiation | infrared electromagnetic radiation | through matter or a vacuum |
Conduction
- In a solid, energetic vibrations transfer energy between neighbouring particles.
- The whole material does not have to flow from hot to cold.
- Mobile electrons provide an additional efficient transfer mechanism in metals.
- Gases generally conduct poorly because particles are widely separated.
- Trapped air insulates well when circulation is restricted.
- For a fair rod comparison, control dimensions, material starting temperature and heating conditions.
- A wax indicator shows warming, but changing rod thickness or flame conditions would confound a comparison.
- Distinguish the observed melting time from the physical property it is intended to compare.
In a solid, particles at the hotter end have greater vibrational energy. Interactions with neighbouring particles transfer energy through the lattice.
All solids
Lattice vibrations transfer energy from more energetic regions to neighbouring particles.
Metals
Delocalised electrons move through the metal and transfer energy rapidly in addition to lattice vibrations.
Why gases and most liquids are poor conductors
- In a gas, particles are far apart, so energy transfer by particle collisions is comparatively ineffective.
- In many liquids, particles are close but are not locked into a solid lattice and there is no metallic delocalised-electron mechanism.
- They therefore conduct much less effectively than good metal conductors.
Pause · explain it yourself
Why can metal feel colder than wood at the same room temperature?
Compare, then improve
Metal conducts energy away from the warmer hand faster, giving a stronger cooling sensation.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
Convection
- Heating a fluid usually makes it expand and become less dense.
- The surrounding denser fluid gives an upward effect, so the warmer fluid rises.
- Cooler fluid moves in to replace it, producing circulation that carries energy.
- A low room heater can establish this pattern.
- Say warm air rises, not heat rises: radiation and conduction can transfer energy in other directions.
- Solids cannot support ordinary bulk convection because their particles cannot circulate freely.
- Explain density change through increased volume for the same mass rather than claiming heating removes the mass.
Convection is thermal energy transfer by bulk movement of a liquid or gas.
cool → contracts → density increases → sinks
Experiment to show convection
- Put water in a beaker or transparent loop.
- Place a tiny coloured crystal/tracer near one lower side.
- Heat gently below that side.
- Observe the coloured path rise above the heater, move across, sink on the cooler side and return.
Heating a room
Air near a low heater warms, becomes less dense and rises. Cooler air moves in to replace it. The circulation distributes thermal energy around the room.
Thermal radiation
- All objects emit thermal radiation.
- It needs no material medium and can cross a vacuum.
- Dull black surfaces generally absorb and emit infrared well; shiny surfaces reflect well and absorb and emit poorly.
Thermal radiation is infrared electromagnetic radiation. It does not require a medium, so it can transfer energy through a vacuum. All objects emit thermal radiation; hotter surfaces generally emit at a greater rate.
| Surface | Infrared absorption | Infrared emission | Reflection |
|---|---|---|---|
| Dull black | good | good | poor |
| Shiny / light reflective | poor | poor | good |
Emitter experiment
Use surfaces at the same temperature and equal area (for example different faces of a hot-water cube). Place the same infrared detector at the same distance and angle from each surface. Compare detector readings.
Absorber experiment
Use two equal-area, equal-mass samples of the same material with different finishes. Start them at the same temperature, expose them to the same infrared source at equal distance and angle, and compare their temperature rise.
Emission rate and energy balance
- At steady temperature, energy still enters and leaves: their rates balance.
- If incoming rate exceeds outgoing rate, internal energy and usually temperature increase; if outgoing exceeds incoming, the object cools.
The rate at which a surface emits thermal radiation increases when:
- its surface temperature increases
- its surface area increases
- its surface is changed towards a better emitting finish.
If the object receives energy faster than it transfers energy away, its internal energy normally increases and its temperature tends to rise. If it loses energy faster, it tends to cool.
Simplified Earth radiation balance
Earth absorbs part of the incoming solar radiation and emits thermal infrared radiation to space. A change in reflection, absorption or emission changes the balance. The temperature then tends to change until the rates move towards a new balance.
Pause · explain it yourself
Why can an object stay at constant temperature while radiating?
Compare, then improve
It receives energy at the same rate it transfers energy away.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
Applications of thermal transfer
| Application | Exam-ready explanation |
|---|---|
| Cooking pan | metal base conducts energy rapidly to the food/water; a polymer or wooden handle conducts much more slowly |
| Room heater | air warmed near the heater becomes less dense and rises; cooler air replaces it, forming a convection current |
| Wood/coal fire | infrared radiation can warm people directly; heated air/gases rise and circulate by convection |
| Car radiator | energy conducts through metal tubes/fins, then moving air carries it away mainly by convection |
Reducing unwanted energy transfer
- A vacuum flask uses a vacuum to reduce conduction and convection across the gap, reflective surfaces to reduce radiation and a stopper to reduce transfer through the opening.
- Vacuum gap: no fluid for convection and almost no particles for conduction across the gap.
- Shiny surfaces: poor infrared emitters/absorbers and good reflectors, so radiative exchange is reduced.
- Poor-conducting stopper/supports: reduce conduction through solid bridges.
- Foam or trapped-air layers: use a poor-conducting gas and small cells that restrict convection.
Pause · explain it yourself
Why do small trapped air pockets make useful insulation?
Compare, then improve
Air conducts poorly and the small pockets restrict circulation, reducing convection as well.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
Thermal-transfer review
Conduction
solid contact → lattice vibrations
metal → add delocalised electrons
fair rod test → same geometry, heating and sensor position.
Convection
warm → expand → lower density → rise
cool → higher density → sink
name the moving fluid.
Radiation
infrared; no medium needed
dull black: good emitter/absorber
shiny: poor emitter/absorber, good reflector.
Energy balance
constant temperature → total input rate = total output rate
emission increases with surface temperature and area.
Four common traps
- Writing “heat rises” instead of explaining the movement of lower-density fluid.
- Saying liquid particles are far apart like gas particles.
- Saying a vacuum stops radiation.
- Using an ordinary thermometer as an infrared detector in an emitter comparison.
Question-reading route
What is moving? If material is flowing, think convection. If energy crosses a solid without bulk flow, think conduction. If it crosses a vacuum, it must be radiation.