2.2.2 & 2.2.3 · Specific Heat Capacity & State Changes
Gravity in calculations: near Earth, g ≈ 9.8 m/s² (9.8 N/kg). Use the value supplied by the question, page instructions or activity; use 10 when it is specified.
internal energy · SHC · melting · boiling · evaporation
Internal energy and temperature
- Temperature relates to average particle kinetic energy.
- Internal energy includes particle kinetic energy and interaction-related potential energy.
- A temperature rise increases internal energy, but internal energy can also increase during melting or boiling at constant temperature.
When the temperature of an object rises, its internal energy increases. A higher temperature means a greater average kinetic energy of its particles.
Specific heat capacity
- Specific heat capacity is energy needed per kilogram per unit temperature rise.
- Use ΔE = mcΔθ without a state change.
- Its unit is J/(kg °C) or J/(kg K).
- Use the temperature difference, not final temperature.
- Larger c means more energy is needed for the same mass and rise.
- Keep energy in joules distinct from power in watts.
| Symbol | Meaning | Unit |
|---|---|---|
| ΔE | energy transferred | J |
| m | mass | kg |
| c | specific heat capacity | J/(kg °C) |
| Δθ | temperature change | °C or K |
Worked example
A 0.50 kg block with c = 900 J/(kg °C) warms from 20 °C to 35 °C. Δθ = 15 °C, so ΔE = 0.50 × 900 × 15 = 6750 J.
Pause · explain it yourself
Equal masses receive equal energy with no losses. Which warms more: larger c or smaller c?
Compare, then improve
Smaller c, because Δθ = ΔE/(mc).
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
Measuring specific heat capacity
- Measure sample mass, initial temperature, energy input and final temperature.
- Electrical input can be measured or found from IVt or Pt under constant conditions.
- Calculate c = input energy/(mass × temperature rise).
- Insulate a block and ensure good heater and thermometer contact.
- For a liquid, use a lid where suitable and stir gently to make temperature uniform.
- Some input warms the container, heater and surroundings.
- Assigning all of it to the sample tends to overestimate c.
- Repeats do not eliminate this systematic error, and longer heating can increase energy loss.
Solid
- Measure the block mass.
- Insert a heater and temperature sensor.
- Insulate the block and record the initial temperature.
- Supply a measured amount of electrical energy, preferably using a joulemeter.
- Record the final temperature and calculate Δθ.
- Use c = ΔE/(mΔθ).
Liquid
- Find liquid mass by subtracting empty-container mass.
- Use an immersion heater and temperature sensor.
- Insulate, use a lid and stir gently.
- Measure energy transferred and temperature rise.
- Calculate c.
Pause · explain it yourself
Why stir a liquid during this experiment?
Compare, then improve
To make its temperature more uniform so the measured rise better represents the whole sample.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
Melting, boiling and condensation
- During melting or boiling of a pure substance at fixed pressure, energy is supplied without a temperature rise.
- Energy changes arrangement and separation rather than average kinetic energy.
- Condensation and solidification transfer energy out.
- Water melts at 0 °C and boils at 100 °C at standard atmospheric pressure.
During melting or boiling of a pure substance, energy can be transferred while the temperature stays constant. The energy changes the particle arrangement/separation rather than increasing average kinetic energy.
| Change | Direction | Particle description |
|---|---|---|
| melting | solid → liquid | particles leave fixed positions and move past one another |
| boiling | liquid → gas | particles become widely separated; bubbles form throughout |
| condensation | gas → liquid | particles become close together but still move past one another |
| solidification | liquid → solid | particles become ordered and vibrate about fixed positions |
Evaporation and cooling
- Evaporation occurs at the surface over a range of temperatures: more-energetic particles escape, reducing the remaining average kinetic energy and cooling the liquid.
- Higher temperature, larger surface area and greater air movement increase evaporation.
- Boiling occurs throughout the liquid, with vapour bubbles, at its boiling temperature.
- No numerical latent-heat equation is required in this section.
Evaporation occurs at the surface. More energetic particles are more likely to escape. Their escape can lower the average kinetic energy of the particles left behind, so the liquid cools.
| Change | Effect on evaporation |
|---|---|
| higher temperature | faster |
| larger exposed surface area | faster |
| greater air movement | faster |
Boiling vs evaporation
| Evaporation | Boiling |
|---|---|
| surface only | throughout the liquid |
| can occur below boiling point | occurs at boiling temperature for the stated pressure |
| no bubbles required | vapour bubbles form throughout the liquid |
Pause · explain it yourself
Can evaporation cool liquid even while energy arrives from the surroundings?
Compare, then improve
Yes, if energy removed by evaporation exceeds energy received, the liquid’s temperature falls.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
Thermal-properties review
- temperature rise → internal energy increases
- higher temperature → greater average kinetic energy
- c = ΔE/(mΔθ); use kg and temperature change
- know solid and liquid SHC experiments and heat-loss errors
- melting/boiling: energy transfer with no temperature change
- water: 0 °C melting, 100 °C boiling at standard atmospheric pressure
- evaporation: surface, more-energetic particles escape, cooling
- faster evaporation: higher temperature, larger area, more air movement