2.2.1 Thermal Expansion
Gravity in calculations: near Earth, g ≈ 9.8 m/s² (9.8 N/kg). Use the value supplied by the question, page instructions or activity; use 10 when it is specified.
Solids, liquids and gases · applications · particle explanation
Thermal expansion
- Most materials expand on heating and contract on cooling in the situations considered here.
- Solids change length, area and volume; liquids change volume; gases can expand strongly if their boundary can move at constant pressure.
Expansion means the substance takes up more space. A freely expanding solid grows slightly in every dimension. A liquid increases in volume. A gas can increase greatly in volume when its boundary is free to move.
Comparing expansion
- For comparable starting volumes and temperature increases at constant pressure, gases generally expand most, then liquids, then solids.
| State | Relative expansion for the same temperature rise at constant pressure |
|---|---|
| Gas | greatest |
| Liquid | intermediate |
| Solid | smallest |
This is a qualitative comparison. No numerical expansion formula is required here.
Particle explanation of expansion
- In a solid, increased vibration generally increases average separation slightly.
- Liquid particles move more vigorously and their separation generally increases.
- Gas particles can become much farther apart when expansion is allowed.
- No numerical expansion-coefficient formula is needed here.
Solid: particles vibrate more vigorously and their average separation increases slightly.
Liquid: particles move more vigorously and remain close, but their average separation increases.
Gas at constant pressure: particles move faster. If the boundary can move, the gas occupies a larger volume and the particles become farther apart.
Pause · explain it yourself
Why is saying particles expand an incorrect explanation?
Compare, then improve
The relevant change is average separation and motion, not the size of each particle.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
Applications of expansion
- A freely moving end lets a heated rod lengthen.
- If both ends are rigidly fixed, prevented expansion can produce stress and buckling instead.
- Bridges use movement joints and sliding supports; overhead wires sag more when warm and tighten when cool.
- Boundary conditions matter for gases too.
- A rigid sealed container cannot increase its gas volume; heating raises pressure instead.
- A gas under a freely moving piston with a constant load can expand at approximately constant pressure.
- Naming the container constraint is part of the explanation, not a minor detail.
- A liquid thermometer depends on liquid expanding more than its glass container.
- The extra liquid volume moves along a narrow calibrated tube.
- A narrow tube gives a larger visible rise for a small volume change.
- A bimetal strip bonds two metals that would expand by different amounts for the same temperature rise.
- Because they cannot slide independently, the strip bends.
- The metal expanding more becomes the outer side of the curve.
- A thermostat uses the movement to operate a switch.
- Describe temperature, movement and circuit effect in order rather than memorising an arbitrary leftward bend.
| Situation | Why expansion matters |
|---|---|
| Bridge / railway joints | room for expansion reduces buckling or damage |
| Overhead wires | wires expand and sag more when hot |
| Metal jar lid | warming increases the opening slightly |
| Liquid-in-glass thermometer | liquid expands relative to glass and rises in the tube |
| Bimetallic thermostat | two bonded metals expand by different amounts, so the strip bends |
Pause · explain it yourself
Why are expansion gaps useful in long bridges?
Compare, then improve
They allow sections to increase in length when warmed, reducing restraint stresses and buckling risk.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
Pause · explain it yourself
Why does a narrow thermometer tube improve sensitivity?
Compare, then improve
A given small volume increase produces a larger column-length change, making it easier to read.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
Thermal-expansion review
Worked example — tight lid
Hot water warms a metal lid. The lid expands and the circular opening becomes slightly larger, so it can loosen on the jar.
Worked example — states
A gas expands much more than a solid because gas particles are far apart and can become much farther apart. Solid particles remain strongly linked near fixed positions.
Final checklist
- expand when heated, contract when cooled
- gas > liquid > solid
- particles do not grow
- applications: gaps, sliding supports, liquid columns, bimetal strips
- for gas expansion, notice whether pressure is constant or the volume is fixed