Gravity in calculations: near Earth, g ≈ 9.8 m/s² (9.8 N/kg). Use the value supplied by the question, page instructions or activity; use 10 when it is specified.
Control one variable, predict the pressure response, explain the collision mechanism, then use Kelvin and $pV$ only where their exact conditions apply.
Core gas reasoningKelvin conversionSupplement Boyle lawSensor-based ATP
Gas questions depend on which variable changes and which stays constant.
2
Core qualitative relationship
Heating a gas at fixed volume
For a fixed gas at constant volume, pressure rises with temperature because particles move faster and strike walls more energetically and frequently.
Extrapolation of idealised pressure data towards absolute zero is a model, not a claim that a real gas remains gaseous throughout cooling.
At constant volume, heating increases average speed and wall-collision effects.
constant volume: temperature ↑ → average speed ↑ → impacts more frequent and stronger → pressure ↑
Compare collision frequency and momentum change per collision using the stated control condition.Gas pressure comes from particle collisions exerting force on the walls.Use the labelled evidence with the question.
Collision chainHOTTER → FASTER → MORE HITS + GREATER Δp PER HIT → HIGHER p
A faster rebound gives a greater momentum change per collision; the particles themselves do not become larger.
Full explanation: particles hit the walls more frequently and with greater momentum change per collision, increasing total wall force per unit area.
Scope guard: this section requires a qualitative prediction. Do not invent a numerical $p/T$ formula unless one is explicitly provided elsewhere.
3
Core qualitative relationship
Compressing a gas at constant temperature
At constant temperature, reducing volume increases collision frequency.Use the stated temperature and mass conditions before predicting pressure.
Compare collision frequency and momentum change per collision using the stated control condition.Use the labelled evidence with the question.
Interactive · Compression Predictor
Move the gas volume
Constant-temperature distinction: do not claim stronger individual collisions. The key change is more frequent collisions because the travel distance is smaller.
Slow-compression reason: waiting for thermal equilibrium helps the gas remain at the stated temperature. Rapid compression can warm it.
4
Two zeros · equal-sized intervals
The Kelvin temperature scale
Kelvin and Celsius have equal-sized intervals but different zeros.
At this level use T/K = temperature/°C + 273.
A rise of 10 °C is a rise of 10 K, but a temperature of 10 °C is not 10 K.
Absolute zero is approximately −273 °C, the lower limit of the thermodynamic temperature scale.
Kelvin uses K without a degree symbol.
$T/\mathrm{K}=\theta/°\mathrm{C}+273$
Kelvin and Celsius intervals are equal in size but have different zero points.
Celsius → kelvin
Add 273. $35 °C=308 K$.
Kelvin → Celsius
Subtract 273. $310 K=37 °C$.
Use the labelled evidence with the question.Absolute zero is the lowest possible temperature.
Interactive · Temperature Bridge
Enter a Celsius temperature
Sign checkK IS 273 HIGHER NUMERICALLY
Room temperature must be roughly 300 K, not a negative kelvin value.
Unit trap: write K, never °K. Keep the degree sign with °C.
Pause · explain it yourself
Does heating from 20 to 40 °C double absolute temperature?
Compare, then improve
No. It changes roughly 293 K to 313 K, so the absolute temperature does not double.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
5
Supplement constant-product law
Boyle’s law
For fixed mass at constant temperature, pV is constant.
Hence p₁V₁ = p₂V₂.
Reducing volume increases pressure because wall collisions become more frequent.
Average kinetic energy remains unchanged if temperature stays fixed.
Use the same pressure units on both sides and the same volume units on both sides; cm³ can be used consistently because the ratio cancels.
Pressures must be absolute, not an unqualified gauge-pressure reading.
A slowly adjusted apparatus and settling time help maintain temperature.
Leakage invalidates the fixed-mass condition.
At constant temperature, reducing volume increases collision frequency.
$pV=\text{constant}$ so $p_1V_1=p_2V_2$
Check whether pressure × volume is approximately constant.Use the labelled evidence with the question.Use the stated temperature and mass conditions before predicting pressure.
Interactive · Boyle Calculator
Find the second pressure
Factor checkV DOWN → p UP
If your calculation makes both pressure and volume fall at constant temperature, recheck the rearrangement.
Unit efficiency: kPa with kPa and cm³ with cm³ is valid in $p_1V_1=p_2V_2$. Convert only when corresponding units differ.
Pause · explain it yourself
What happens to absolute pressure when volume halves under Boyle’s-law conditions?
Compare, then improve
It doubles, keeping pV constant.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
Pause · explain it yourself
Why wait after rapid compression before taking a Boyle-law reading?
Compare, then improve
To allow the gas to return towards room temperature so the comparison is closer to constant temperature.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
6
Curve · reciprocal · product
Gas-law graphs
A pressure–volume graph for constant temperature is a downward curve, not a straight descending line.
Inverse proportion means constant product, not simply one quantity rising while the other falls.
A graph of pressure against 1/volume is straight through the origin in the ideal model.
In an experiment, seal the gas, measure volume and pressure, allow temperature to settle and check for leakage.
Repeat measurements where appropriate.
Explain systematic deviations using controlled conditions rather than assuming every non-exact product is random error.
Use the graph shape to identify the relationship.Use the graph shape to identify the relationship.Check whether pressure × volume is approximately constant.At constant temperature, reducing volume increases collision frequency.Use the labelled evidence with the question.
Interactive · Product Checker
Test one pressure–volume pair
Graph language: “pressure is inversely proportional to volume” is stronger than “pressure decreases.” Support it using constant products or a straight $p$–$1/V$ plot.
Do not join dot-to-dot: experimental graphs use a smooth best-fit curve or best-fit line; anomalies should not control the trend.
Use the labelled evidence with the question.At constant temperature, reducing volume increases collision frequency.
Worked: find the second volume
$p_1V_1=p_2V_2$
$V_2=(90×80)/120=60\text{ cm}^3$.
Sense-check: pressure rose, so volume fell.
Kelvin uses K without a degree symbol.Check whether pressure × volume is approximately constant.
Label both gas states.
Write fixed mass and constant temperature.
Make corresponding units match.
Substitute into $p_1V_1=p_2V_2$ and rearrange.
Sense-check inverse direction and attach a unit.
Cross-multiplication trap: keep each pressure with its same-state volume. Use a labelled table if the wording gives final data first.
Precision: retain extra digits during working, then round to the precision justified by the data.
8
Alternative to Practical
Design gas investigations around equilibrium, leaks and controlled compression
Use pressure-rated apparatus and keep temperature as constant as possible.Complete or interpret the labelled axes.Complete or interpret the labelled axes.A supervised low-risk setup can investigate pressure against temperature at constant volume.Use the labelled evidence with the question.
Volume investigation
Change marked syringe volume; control gas mass and temperature. Use an absolute-pressure reading, then plot $p$ vs $V$ and $p$ vs $1/V$.
Temperature investigation
Use a rigid sealed rated vessel in mild supervised baths. Control mass and volume; record steady pressure qualitatively against temperature.
Issue
Likely effect
Improvement
rapid compression
gas warms; pressure too high for constant-T test
compress slowly and wait for equilibrium
dead volume in tubing
effective volume larger than syringe reading
measure/include connection volume
small leak
gas mass drifts
leak-check and compare return readings
plunger parallax
volume too high/low
read mark at eye level from a fixed reference
pressure type
a gauge-pressure reading does not satisfy the Boyle-law product directly
use an absolute-pressure sensor/readout
Safety: use pressure-rated, needle-free, securely clamped apparatus; modest compression only; keep faces out of the plunger line. For temperature work, use supervised mild water baths—never flame, boiling water or strong heating of a sealed gas.
High-level evaluation: name whether an error changes mass, temperature, effective volume or sensor zero, then predict its effect on the relationship.
1
The first move is always the condition
Pressure, volume and temperature form a three-variable decision map
For a fixed mass of gas, pressure can change because temperature changes, volume changes, or both. A fair relationship changes one cause while controlling the other.
Gas questions depend on which variable changes and which stays constant.Use the stated temperature and mass conditions before predicting pressure.At constant volume, heating increases average speed and wall-collision effects.Use the labelled evidence with the question.
Question openerFIXED MASS · WHAT CHANGES? · WHAT IS FIXED?
Write the condition before choosing a relationship.
Condition language earns marks: “for a fixed mass of gas at constant volume…” or “…at constant temperature.”
Two-variable trap: if temperature and volume both change, one simple qualitative rule cannot isolate the pressure effect.
9
Last-minute examiner sheet
Gases and Absolute Scale Master Sheet
Gas questions depend on which variable changes and which stays constant.At constant volume, heating increases average speed and wall-collision effects.At constant temperature, reducing volume increases collision frequency.Kelvin uses K without a degree symbol.Use the graph shape to identify the relationship.
Equation set
$T/\mathrm{K}=\theta/°\mathrm{C}+273$
$pV=\text{constant}$ · $p_1V_1=p_2V_2$
Boyle conditions: fixed mass and constant temperature.
Pressure type: Boyle-law calculations use gas pressure on an absolute scale. In practical work, use an absolute-pressure sensor/readout.
Constant volume
Hotter → faster → more frequent and stronger impacts → higher pressure.