Gravity in calculations: near Earth, g ≈ 9.8 m/s² (9.8 N/kg). Use the value supplied by the question, page instructions or activity; use 10 when it is specified.
Read matter like an examiner: use shape, volume, flow and compressibility as evidence—then trace each state-change arrow from start to finish.
Core state propertiesState-change languageATP observation skillsInteractive notebook
Three states, three distinct patterns of macroscopic behaviour.
1
Observe before naming
Identifying states of matter
The three states are solid, liquid and gas. In exam questions, identify the state from evidence about shape, volume, flow and compressibility.
The particle pictures are a preview; this subtopic focuses first on observable properties.Use the whole row. One property alone may be shared by more than one state.Shape and volume evidence distinguishes the three states.
Exam mnemonicS-V-F-C
Shape → Volume → Flow → Compressibility. Check all four before committing.
At this stage recognise the change-of-state names; detailed boiling/evaporation differences are studied later.
High-value sentence: “The sample is a liquid because it changes shape to match the container but keeps a fixed volume and is very difficult to compress.” Evidence earns the mark.
Appearance trap: glass can be transparent and rigid; coloured water can look like a solid patch in a drawing. Use the stated properties, not colour or name.
Scope guard: identify states here from observable shape, volume, flow and compressibility. Particle diagrams are formally developed in Topic 2.1.2.
2
Fixed shape · fixed volume
Solids
Solid particles still move: they vibrate near fixed positions.
Avoid calling a solid completely motionless at particle level.
In solids they remain near fixed positions.
Closely packed particles help a solid keep a fixed shape and volume; detailed particle reasoning comes in 2.1.2.Moving a solid does not make it copy the container shape.
Shape
Fixed. A solid does not normally adopt the outline of its container.
Volume
Fixed. It occupies approximately the same amount of space.
“Very difficult to compress” is safer than the absolute word “impossible”.At this stage recognise the change-of-state names; detailed boiling/evaporation differences are studied later.
Ordinary conditions: state properties describe typical behaviour on the scale of the question. A powder can be poured, but each grain is still a solid.
Quick check · Sand takes the shape of a bucket. Has each grain become liquid?
No. The pile rearranges because separate solid grains move past one another; each grain retains solid properties.
3
Container shape · fixed volume
Liquids
In liquids they are close but move past neighbours.
The particles remain close but can rearrange; the detailed explanation follows in 2.1.2.The liquid changes outline while its amount and volume stay the same if none is lost.
liquid: no fixed shape + fixed volume + flows + very difficult to compress
Use observable properties to identify the state.Compare compressibility using safe prepared apparatus.
Comparison sentence: both liquids and gases flow and take the container shape, but only the liquid keeps a fixed volume.
Free-surface clue: a liquid normally occupies the lower part of a vessel and has a surface. A gas occupies the available vessel, not only the bottom.
4
No fixed shape · no fixed volume
Gases
In gases they are far apart and move between collisions.
Large particle separations allow a gas volume to change greatly; the mechanism is developed in 2.1.2.Gas spreads through connected available space.
gas: no fixed shape + no fixed volume + flows + readily compressed
Compare compressibility using safe prepared apparatus.At this stage recognise the change-of-state names; detailed boiling/evaporation differences are studied later.
Do not say “gas has no volume.” Say gas has no fixed volume; it occupies the volume available to it.
Visibility trap: most gases are invisible. A visible cloud often consists of tiny liquid droplets or solid particles suspended in a gas.
Pause · explain it yourself
Why are large gaps shown in a gas particle diagram?
Compare, then improve
Gas particles have much greater average separation than liquid or solid particles, explaining substantial compressibility.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
5
One table defeats most traps
Comparing solids, liquids and gases
A solid has its own shape and nearly fixed volume.
A liquid takes the shape of the occupied part of its container while keeping nearly the same volume.
A gas spreads through available space and has neither its own fixed shape nor fixed volume.
Both liquids and gases can flow, so flow alone does not distinguish them.
A gas compresses much more readily because its particles are widely separated.
The particles of a substance retain their identity when its state changes.
Bulk properties emerge from many particles interacting.
A dot is a model symbol rather than a photograph, and a liquid particle is not a tiny liquid droplet with all the properties of a bulk sample.
Keep particle size distinct from interparticle distance and compare arrangements rather than interpreting schematic diagrams as exact scale drawings.
Use the diagrams with the property table; particle patterns alone are not yet the full explanation.This four-column matrix is the fastest classification tool.Compare compressibility using safe prepared apparatus.Shape and volume evidence distinguishes the three states.
Observation
Solid
Liquid
Gas
fixed shape
yes
no
no
fixed volume
yes
yes
no
flows
no
yes
yes
readily compressed
no
no
yes
Classification ladderSHAPE → VOLUME → SQUEEZE
Fixed shape? Solid. If not, fixed volume? Liquid. If neither and readily compressed? Gas.
Shared-property warning: “it flows” narrows the answer to liquid or gas; add fixed-volume or compression evidence to finish.
Pause · explain it yourself
Why does a sealed water-filled syringe resist compression much more than an air-filled one?
Compare, then improve
Water particles are already close together; gas particles have large gaps that can be reduced.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
6
Read every arrow by direction
Changes of state
Melting is solid to liquid; solidification is liquid to solid.
Boiling and evaporation take liquid to gas; condensation takes gas to liquid.
Draw arrows between states if a name feels uncertain.
For a pure substance at fixed pressure, melting and solidification have the same characteristic temperature.
Water melts at 0 °C and boils at 100 °C at standard atmospheric pressure.
These values are not universal for every substance or pressure.
A change of state changes physical arrangement, not chemical identity.
Invisible water vapour must be distinguished from visible droplets.
The required routes are solid ↔ liquid and liquid ↔ gas.
Vaporisation: liquid → gas. Condensation: gas → liquid.
Hide the labels and name each arrow from its direction.At this stage recognise the change-of-state names; detailed boiling/evaporation differences are studied later.Always identify the starting and finishing states before naming the process.
Direction mnemonicCONdense comes DOWN to liquid
Vaporisation climbs from liquid to gas; condensation returns from gas to liquid.
Scope boundary: do not add a direct solid ↔ gas route here. It is not required for this syllabus point.
Pause · explain it yourself
An ice cube becomes water, then freezes again. Name the two changes.
Compare, then improve
Melting followed by solidification. The material remains water.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
8
Alternative to Practical
Make compressibility evidence fair, measurable and safe
Compare compressibility using safe prepared apparatus.
Use identical, pressure-rated, needle-free syringes prepared by the teacher.
Set equal initial sample volumes and record initial plunger positions.
Apply the same modest load for the same time.
Measure plunger displacement or volume decrease.
Repeat after resetting; calculate means and compare spread.
Conclude only for the tested conditions.
At this stage recognise the change-of-state names; detailed boiling/evaporation differences are studied later.A fair comparison changes the material state while controlling the apparatus and loading.
Problem
Effect
Targeted improvement
air bubble in water
extra displacement falsely attributed to liquid
fill slowly and remove visible bubbles
different plunger friction
motion differs for apparatus reason
use matched syringes and swap/repeat
force judged by hand
uncontrolled force
use the same modest measured load
apparatus not fixed
poor position readings
clamp securely and read ruler at eye level
Safety: keep pressure low, use capped needle-free apparatus, secure it, keep faces out of the plunger line and follow teacher supervision. Never heat a sealed gas sample.
Evaluation formula: exact limitation → effect on measured displacement → specific improvement.
7
Examiner language engine
Build property and state-change answers in the order marks are awarded
Use observable properties to identify the state.Question technique: point to the start, follow the arrow, name the finish.At this stage recognise the change-of-state names; detailed boiling/evaporation differences are studied later.Compare compressibility using safe prepared apparatus.
Underline the observation or arrow direction.
Name the state/process.
Quote the exact property evidence.
Use comparative wording: fixed/no fixed, readily/very difficult.
Check that your explanation does not simply repeat the question.
Two-mark pattern: conclusion + evidence. For example, “Y is a gas because it has no fixed volume and fills the available container.”
Word-pair trap: fixed shape does not mean fixed position; fixed volume does not mean the liquid cannot be poured.
9
Last-minute examiner sheet
States of Matter Master Sheet
Solid: fixed shape/volume · Liquid: fixed volume · Gas: fills available volume.Memorise the contrasts, then use the question evidence.Use solid ↔ liquid ↔ gas change names only; direct solid ↔ gas changes are not required.At this stage recognise the change-of-state names; detailed boiling/evaporation differences are studied later.
Property answer
State + evidence: “liquid because it changes shape but keeps fixed volume.”
Process answer
Direction + term: “gas → liquid, so condensation.”
Final stripS-V-F-C · START → FINISH
Use properties to identify states and direction to name changes.
Final check · What is the reverse of vaporisation?
Condensation: gas changes to liquid.
Interactive mastery: 0 / 7 explored
Complete the seven checkpoints, then move to original Practice questions.