PHYSICS CREST
Physics

Topic 5.2 · Radioactivity

Gravity in calculations: near Earth, g ≈ 9.8 m/s² (9.8 N/kg). Use the value supplied by the question, page instructions or activity; use 10 when it is specified.

Separate background from source, identify the emission from evidence, protect A and Z, then halve only the radioactive part.

Detection & backgroundAlpha · beta · gammaDecay equationsHalf-life & usesSafe data ATP
RADIOACTIVITY EXAMINER DECODERCORRECTmeasured −backgroundCLASSIFYabsorber + fieldevidenceBALANCEprotect A and ZHALVEsource part onlyCORRECT → CLASSIFY → BALANCE → HALVECORRECT · CLASSIFY · BALANCE · HALVE
Four examiner moves connect detector data, radiation evidence, nuclear equations and half-life.
2
A real signal exists even without the test sample

Background radiation

  • Background comes from radon in air, rocks and buildings, cosmic rays, food and drink.
  • A detector registers background as well as the source.
  • Measure background in comparable conditions and subtract rates using matching units.
SIGNIFICANT BACKGROUND SOURCESRADONgas in airROCKSand buildingsFOODand drinkCOSMICrays from spacebackground varies with place and time
Know all four significant source groups; a question may hide them among non-ionising distractors.
WHY BACKGROUND READINGS FLUCTUATE?decay???decay?????decay?????decay????decay?one nucleus:unpredictablelarge sample: smoothtrend
Random arrival means equal-duration background counts are similar on average, not identical.
BACKGROUND SERIESinterval / min1 · 1 · 1 · 1 · 1counts15 · 19 · 16 · 13 · 17best estimatemean = 16 counts/minvariationrandom
Use several equal-time readings and a mean when background is measured repeatedly.
Background radiation is the ionising radiation detected in the environment when the investigated source is absent.
SourceWhere it comes fromExaminer distinction
radon gasradioactive material in the ground enters airoften the largest natural contribution in some locations
rocks and buildingsradioactive isotopes in minerals/materialsbuilding material can contribute
food and drinksmall amounts of radioactive isotopesnatural internal contribution
cosmic rayshigh-energy radiation arriving from spacecontribution changes with altitude
Classify a possible background source.
Source mnemonicR · R · F · C

Radon · Rocks · Food · Cosmic. Non-ionising communication waves are classic distractors.

Zero-error trap: a non-zero reading without the sample is not automatically a faulty counter. It may be genuine background radiation.
Randomness sentence: “The counts vary because nuclear emissions arrive randomly, so repeated equal-time readings fluctuate around a mean.”
Quick Check · Why is there no universal background count rate?
It depends on location, altitude, building materials, detector sensitivity and the random timing of detected events.

Pause · explain it yourself

Why measure background when a source is close to the detector?

3
Count first · divide by time · subtract background

Detecting radiation

DETECTOR → COUNTER → RATEcoded samplerecorded runradiationdetectorCOUNTER126 counts/mintimed readingbackground = 18measured = 126source = 108source rate = measured rate −background rate
Measured rate contains both source and background contributions.
COUNT-RATE WORKSPACEtotal count630counting time5.0 minmeasured rate126 counts/minbackground rate18 counts/mincorrected rate108 counts/min
Units tell you whether division by time has already been completed.
count rate = total count ÷ counting time
corrected source rate = measured rate − background rate
Interactive · Count-rate processor

Convert and correct in the right order

measured = 126.00 counts/min · corrected = 108.00 counts/min
  1. Underline whether the value is a total count or a count rate.
  2. Divide total count by the stated time.
  3. Put the measured and background rates in the same unit.
  4. Subtract background once.
  5. Carry the corrected source rate into later decay work.
Correction mnemonicSAB

Source Alone = Both together − Background.

Unit trap: never subtract a total number of counts from a rate. Convert both to counts/s or both to counts/min first.
Quick Check · 900 counts in 6 min; background 25 counts/min. Find corrected rate.
Measured rate = 900/6 = 150 counts/min. Corrected rate = 150 − 25 = 125 counts/min.
4
Individual timing is unknowable · population trend is predictable

Random and spontaneous decay

  • Spontaneous decay occurs without an external trigger.
  • Random decay means an individual nucleus’s decay time cannot be predicted.
  • Large samples nevertheless follow a predictable statistical pattern.
  • Short successive counts fluctuate naturally.
  • Longer counting or repeats reduce fractional random uncertainty but do not subtract background automatically.
  • Keep activity of the source distinct from what a particular detector can register at its position.
RANDOM INDIVIDUAL DECAYdecay?????decay?decay??????decay?????decay??one nucleus:unpredictablelarge sample: smoothtrend
No pattern in the drawing can identify which remaining nucleus decays next.
Radioactive decay · source-only count rateRadioactive decay · source-only count ratecountratetimeT½2T½3T½Equal time intervals halve the source contribution; the background does not halve.
A smooth decay curve describes a large population; it does not schedule individual nuclei.

SPONTANEOUS

The decay happens by itself. Ordinary heating, cooling, pressure and chemical changes do not trigger it or alter its half-life.

RANDOM

The exact nucleus and exact decay time cannot be predicted. Direction of emission is also random.

Press run: every result can differ while the long-run fraction remains predictable.
Logic mnemonicONE: UNKNOWN · MANY: PATTERN

The probability per unit time for each unstable nucleus is constant, but random chance decides individual outcomes.

Full-mark distinction: do not define random as “decay has no cause”. That describes spontaneous. Random means the next nucleus/time cannot be predicted.
Half-life trap: one nucleus does not “wait one half-life”. Half-life belongs to a population of identical unstable nuclei.
Quick Check · Can a particular nucleus survive for several half-lives?
Yes. Half-life is statistical; it does not set a fixed lifetime for an individual nucleus.
5
Nature and charge explain the later evidence

Alpha, beta and gamma

  • Alpha is a helium nucleus with charge +2 and A = 4: strongly ionising, weakly penetrating.
  • Beta-minus is a fast electron emitted in a nuclear change, not an orbital electron simply shaken loose.
  • Gamma is electromagnetic radiation with no charge, relatively high penetration and lower ionisation per unit path than alpha.
THREE NUCLEAR EMISSIONSα2 p + 2 ncharge +2ionising mostpenetration leastβ⁻electroncharge −1ionising mediumpenetration mediumγEM wavecharge 0ionising leastpenetration mostionisation and penetration run inopposite orders
Learn four separate columns: nature, charge, ionisation and penetration.
NUCLIDE IDENTITYalphaA = 4 · Z = 2 · charge +2beta-minusA = 0 · Z = −1 · electrongammaA = 0 · Z = 0 · EM wavebeta means β− in thiscourse
The nuclide values are the bookkeeping carried away in decay equations.
EmissionNatureRelative chargeRelative massSpeed
alpha, αhelium nucleus: 2 p + 2 n+24less than beta/gamma
beta-minus, β⁻high-speed electron from a nuclear change−1very smallvery fast
gamma, γhigh-frequency electromagnetic wave00speed of light
Choose evidence to name the emission.
Identity mnemonicHEAVY +2 · LIGHT −1 · WAVE 0

Alpha is a heavy helium nucleus, beta is a light electron, gamma is a neutral wave.

Origin trap: a beta particle is not an orbital electron falling out of the atom. It is produced when a neutron changes into a proton in the nucleus.
Quick Check · Which emission belongs to the electromagnetic spectrum?
Gamma radiation. It is an electromagnetic wave, not a material particle.
6
Read each change in count, not just the final count

Penetration and absorption

ABSORBER EVIDENCEnone520 cpmpaper360 cpmaluminium150 cpmthick lead24 cpmαβγcompare each fall in count
Each new fall identifies a component that the added absorber removes.
THREE NUCLEAR EMISSIONSα2 p + 2 ncharge +2ionising mostpenetration leastβ⁻electroncharge −1ionising mediumpenetration mediumγEM wavecharge 0ionising leastpenetration mostionisation and penetration run inopposite orders
The most ionising emission loses energy fastest and therefore has the least range/penetration.
EmissionIonising effectTypical stopping evidencePenetration
alphagreatestpaper / a few cm of airleast
betamediuma few mm of aluminiummedium
gammaleastreduced by thick lead/concretegreatest
ionisation order: α > β > γ
penetration order: γ > β > α

Why alpha ionises most at the same kinetic energy

  • An alpha particle has charge magnitude 2, so its electric interaction with atomic electrons is stronger than beta's.
  • Its much larger mass also gives it a lower speed at the same kinetic energy, so it interacts for longer while passing an atom.
  • It creates many ion pairs per unit distance, loses kinetic energy rapidly and therefore has a short range.
Interactive · Absorber decoder

Identify components from successive falls

paper fall → alpha present · aluminium fall → beta present · penetrating remainder → gamma likely
Order mnemonicA B G: ABSORBED → BETTER → GOES

Alpha is absorbed first, beta travels farther, gamma goes through most strongly.

Mixture method: compare successive readings. Paper 500→350 means alpha; aluminium 350→120 means beta; a remainder well above background means a penetrating gamma component.
Background trap: a reading near background after an absorber does not prove radiation is passing through. Correct the reading before deciding.
Quick Check · Paper causes no fall; aluminium causes a large fall; lead causes a further fall. What is present?
Beta and gamma. No paper fall means no detectable alpha component; the aluminium and lead changes reveal beta and gamma.
7
Charge decides direction · mass controls curvature

Deflection in fields

  • Alpha and beta deflect in fields according to charge; gamma does not.
ELECTRIC-FIELD PATHSupper plate +lower plate −beamαβ⁻γopposite charges → opposite paths
With the upper plate positive, beta curves upward; alpha curves downward; gamma stays straight.
MAGNETIC-FIELD PATHS××××××××××××××××××××××××××××××××αβ⁻γfield into page · charged paths oppose
In a magnetic field, charged emissions curve oppositely and gamma remains undeflected.

ALPHA

Positive, so force is towards a negative plate. Large mass means a gentle curve.

BETA

Negative, so force is towards a positive plate. Tiny mass means a tight curve.

GAMMA

No charge, so no electric or magnetic deflection.

Choose a field clue.
Field mnemonicOPPOSITE SIGNS · BETA BENDS BIGGER · GAMMA GOES STRAIGHT

For magnetic questions, first decide whether motion is perpendicular; parallel motion gives no magnetic force.

Direction discipline: in an electric field, name the plate sign. In a magnetic field, apply the stated field direction and remember beta is negative.
Neutral-path trap: “straight” alone can also occur when charged motion is parallel to a magnetic field. Use the whole diagram.
Quick Check · Which path usually curves most in the same field?
Beta, because its mass is far smaller than the mass of an alpha particle. Gamma does not curve because it is uncharged.
8
Decay changes an unstable nucleus towards a more stable state

Nuclear stability

UNSTABLE NUCLEUS → GREATERSTABILITYunstabletoo heavy or excessneutronshigh nuclear energyα / β / γmore stablebetter neutron balanceand/or lower energydecay directionbeta-minus: neutron → proton + electron
An isotope may be radioactive because the nucleus is too heavy and/or has excess neutrons.
UNSTABLE NUCLEUS → GREATERSTABILITYunstableexcess neutron balancehigh nuclear energyβ−more stableone fewer neutron · onemore protondecay directionbeta-minus: neutron → proton + electron
Beta-minus reduces neutron excess through neutron → proton + electron.

An unstable nucleus can change spontaneously and emit alpha, beta and/or gamma radiation. The change tends to increase stability by reducing excessive size, improving the neutron-proton balance or removing excess nuclear energy.

beta-minus nuclear change: neutron → proton + electron
Choose a possible cause or response.
Stability mnemonicSHED SIZE · SHIFT RATIO · SEND ENERGY

Alpha sheds four nucleons, beta-minus shifts neutron/proton balance, gamma sends away excess energy.

Electron trap: beta-minus emission raises proton number even though a negative particle leaves. The nucleus contains one more proton after the neutron conversion.
Quick Check · Does beta-minus change the total number of nucleons?
No. One neutron becomes one proton, so A is unchanged while Z increases by 1.
9
Upper row A · lower row Z · balance both

Radioactive decay equations

  • Alpha reduces A by 4 and Z by 2.
  • Beta-minus converts a neutron to a proton and electron: A stays fixed, Z rises by 1.
  • Gamma changes nuclear energy without changing A or Z.
NUCLIDE-EQUATION LEDGERPARENTX22688emits αDAUGHTERY22286alpha: A − 4 · Z − 2
Alpha carries away ⁴₂α.
NUCLIDE-EQUATION LEDGERPARENTX3215emits β−DAUGHTERY3216beta-minus: A unchanged · Z + 1
Beta-minus carries ⁰₋₁β, so the daughter proton number rises.
NUCLIDE-EQUATION LEDGERPARENTX6027emits γDAUGHTERY6027gamma: A unchanged · Z unchanged
Gamma removes energy but no nucleon number or proton number.
EmissionChange in AChange in ZElement?
alpha−4−2changes
beta-minus0+1changes
gamma00unchanged
Interactive · Daughter-nucleus builder

Protect A and Z on separate lines

daughter A = 206 · daughter Z = 82
  1. Write the emitted particle with its A and Z values.
  2. Balance the upper-number row.
  3. Balance the lower-number row.
  4. Use the new Z to identify the daughter element if a periodic table is provided.
  5. Check that both side totals match.
Equation mnemonicα: −4, −2 · β: 0, +1 · γ: 0, 0

Do not try to remember a whole equation; remember the two-row change.

Quick Check · What is the net change after alpha then beta-minus?
A changes by −4; Z changes by −2 + 1 = −1.
10
Turn time into steps · halve once per step

Half-life

  • Half-lifeTime for half the nuclei of an isotope in a sample to decay.
  • Equal intervals give remaining fractions 1, ½, ¼, ⅛.
  • Activity and background-corrected count rate follow the same pattern with unchanged geometry and detection conditions.
  • Uncorrected readings approach background rather than zero.
HALF-LIFE LADDER640rateHALVE0 h320rateHALVE5 h160rateHALVE10 h80rate15 hnumber of half-lives = elapsed time /half-life
After 15 h with a 5 h half-life, three halves leave 640/8 = 80.
Radioactive decay · source-only count rateRadioactive decay · source-only count ratecountratetimeT½2T½3T½Equal time intervals halve the source contribution; the background does not halve.
Choose two clear count-rate levels where one is half the other; subtract their times.
Half-life is the time taken for half the unstable nuclei of a particular isotope in any sample to decay.

Mass, number of undecayed nuclei and corrected count rate can all track the remaining radioactive sample. The defining idea is still nuclei.

number of half-lives, n = elapsed time ÷ half-life
fraction remaining = (1/2)n
Interactive · Half-life ladder

Convert time, then halve

3.00 half-lives · remaining = 120.00
Halving mnemonicTIME ÷ T½ → COUNT STEPS → HALVE

Working backwards, count how many doublings take the later value back to the initial value.

Graph method: mark one corrected rate, mark half that rate, draw horizontally to the curve and vertically to the time axis, then subtract the two times.
Zero trap: exponential decay does not reach zero at a finite number of half-lives. Never define half-life as “time to decay completely”.
Quick Check · 48 mg becomes 6 mg. How many half-lives?
48 → 24 → 12 → 6: three half-lives.

Pause · explain it yourself

A corrected rate is 800 counts/min with half-life 5 min. Find it after 15 min.

A source has an initial corrected count rate of 160 counts/min. What is expected after two half-lives?

Your turn · A corrected source count rate is 240 counts/min. Find it after three half-lives.

Decimals and scientific notation are accepted. Compatible units are accepted.

11
The curve approaches background, not zero

Decay with background radiation

Radioactive decay · measured rate includes constant backgroundRadioactive decay · measured rate includes constant backgroundcountratetimebackground 20T½2T½3T½Equal time intervals halve the source contribution; the background does not halve.
The vertical source height is measured from the 20-count/min baseline.
DETECTOR → COUNTER → RATEday 0 datarecordedradiationdetectorCOUNTER660 counts/mintimed readingbackground = 20measured = 660source = 640source rate = measured rate −background rate
Start by converting the first measured rate into a source-only rate.
OFFSET HALVINGmeasured day 0660background20source day 0640after one half-life320 + 20 = 340after two160 + 20 = 180
Subtract, halve, restore: background remains constant while the source component decays.
measured rate = source rate + background rate
halve the source excess above the baseline
Interactive · Background-aware decay

Subtract → halve → restore

source = 640.00 · later detector reading = 180.00
  1. Find or infer the background level.
  2. Subtract it from the measured starting rate.
  3. Halve the corrected source rate the required number of times.
  4. Add the unchanged background to predict a detector reading.
Offset mnemonicSUBTRACT · HALVE · RESTORE

The asymptote is the background floor.

Most common hard-question error: halving 660 to 330 would also halve the background. The correct first-half reading is 320 + 20 = 340.
Quick Check · Measured 500, background 20. What measured rate follows one half-life?
Source = 480; half is 240; restore background to obtain 260 counts/min.
12
Choose the radiation first · justify the half-life second

Uses of radiation

  • For applications, connect penetration and half-life to purpose.
  • A thickness gauge needs radiation partly absorbed by the sheet; sterilisation uses penetrating gamma.
MATCH PENETRATION, THEN HALF-LIFESMOKE ALARMα · longTHIN SHEETβ · longSTERILISEγ · suitableDIAGNOSISγ · shorttype first · half-life second
Each selection needs two separate reasons: radiation behaviour and a suitable half-life.
THREE NUCLEAR EMISSIONSα2 p + 2 ncharge +2ionising mostpenetration leastβ⁻electroncharge −1ionising mediumpenetration mediumγEM wavecharge 0ionising leastpenetration mostionisation and penetration run inopposite orders
Return to the property ledger whenever an application feels like a memory test.
ApplicationSuitable emissionWhy this emission?Half-life logic
household smoke alarmalphastrongly ionises air; smoke disrupts the ionisation currentlong: reliable for years
food irradiationgammapenetrates food/packaging and kills bacterialong enough for repeated controlled-facility use
sterilising equipmentgammapenetrates sealed wrapping and kills microorganismslong enough for repeated controlled-facility use
thin-sheet monitoringbetapartly absorbed as thickness changeslong: steady output and rare replacement
thicker-material monitoringgammamore penetrating, so some radiation can pass through thicker material to the detectorlong: steady industrial output
external diagnosisgammaleaves body for detectionshort enough to reduce later exposure
cancer treatmentgammapenetrates to target tissue and ionises cellschosen for the treatment schedule
Choose an application to build its two-part justification.
Choice mnemonicTYPE FIRST · TIME SECOND

First match penetration/ionisation. Then decide whether the source output should remain steady or fall quickly.

Two-reason structure: “Gamma is penetrating enough to leave the body and be detected; a short half-life reduces unnecessary exposure after imaging.”
Irradiation trap: food or equipment exposed to gamma is not made radioactive by this syllabus-level process.
Quick Check · Why is alpha unsuitable for an external medical scan?
Alpha is weakly penetrating, so it would be absorbed before leaving the body and reaching an external detector.
13
Turn a detector change into a machine response

Controlling exposure

BETA THICKNESS CONTROL LOOPsourcethick filmdetectorlow cpmcontrollerreduce roller gap
Too thick → more beta absorbed → lower count → reduce roller gap.
BETA THICKNESS CONTROL LOOPsourcethin filmdetectorhigh cpmcontrollerincrease roller gap
Too thin → less beta absorbed → higher count → increase roller gap.
thicker sheet → more beta absorbed → lower detector rate
Choose the detector fault signal.
  1. Compare detector count with the target count.
  2. Decide whether more or less beta was absorbed.
  3. Infer whether the sheet is too thick or too thin.
  4. State the roller-gap change that corrects future sheet thickness.
Control mnemonicLOW COUNT → TOO THICK → GAP DOWN

High count gives the reverse chain.

Direction trap: a lower count does not mean the source has become weaker instantly. First check whether the sheet has absorbed more radiation.
Quick Check · Why not use alpha or very penetrating gamma for a thin sheet?
Alpha would be almost completely stopped, while very penetrating gamma may change too little with thickness. Beta gives a sensitive partial absorption.
14
Explain every precaution through reduced dose

Radiation precautions

  • Reduce exposure time, increase distance and use appropriate shielding.
  • Danger depends on more than half-life alone: activity, radiation type, exposure route and duration matter.
THREE PROTECTION PRINCIPLESTIMEreduce exposureDISTANCEincrease separationSHIELDINGabsorb radiationprecaution → lower exposure/dose → lowerrisk
The three general principles apply to all ionising radiations; shielding material depends on penetration.
BENEFIT–RISK CONTEXTSSMOKE ALARM?THIN SHEET?STERILISE?DIAGNOSIS?ionisation can be useful or harmful
Ionisation may sterilise or treat, but uncontrolled exposure can damage healthy cells.

POSSIBLE EFFECTS

Cell death, mutations and increased cancer risk. Ionisation can damage molecules inside living cells.

USEFUL CONTROL

The same cell-killing effect can destroy bacteria or target cancer cells when carefully controlled by trained professionals.

PrincipleAction in an authorised settingWhy risk falls
timeminimise exposure durationfewer emissions can be absorbed
distancemaximise separation / use remote systemsintensity at living tissue is lower
shieldingplace suitable absorber between source and peoplethe material absorbs radiation

MOVE / USE

Only trained personnel control real sources. Remote handling and suitable shielding keep living tissue farther from the source, while exposure time is kept as short as practicable.

STORE

When not in use, sources are kept secure in clearly identified, suitably shielded storage so radiation reaching people is reduced.

Examiner chain: state the safe arrangement, then explain how it reduces exposure: less time, more distance and/or more absorption by shielding.
Choose a proposed safety measure.
Safety mnemonicT · D · S

Time down · Distance up · Shielding between.

Explanation mark: “Use shielding” earns more when completed with “so radiation is absorbed and less reaches living tissue.”
Learner boundary: investigate using simulations, photographs and supplied data. Any real source is controlled only by authorised trained adults under institutional procedures.
Quick Check · Does lead shielding change the half-life?
No. It absorbs radiation after emission; it does not change the spontaneous nuclear decay rate.

Pause · explain it yourself

Why can alpha be hazardous inside the body despite low penetration?

15
Alternative to Practical · safe data, real examiner technique

ATP Lab Lens: reliable counting, correction, graphs and evaluation

SAFE ATP DATA WORKFLOWSIMULATEor supplieddataREPEATequal timeMEANrandom countsCORRECTsubtractbackgroundGRAPHunits + trendscreen data only · authorised adults controlreal sources
The learner workflow is entirely data-based: simulate or receive readings, repeat, average, correct and graph.
DETECTOR → COUNTER → RATEvirtual samplescreen modelradiationdetectorCOUNTERmean Mcounts/mintimed readingbackground = meanBmeasured = mean Msource = M − Bsource rate = measured rate −background rate
Use equal counting intervals and identical geometry for fair comparison.
ABSORBER EVIDENCEnonemean N cpmpapermean P cpmaluminiummean Al cpmthick leadmean Pb cpmrepeated corrected readings
For absorber analysis, change only material/thickness and keep geometry and timing fixed.
Radioactive decay · source-only count rateRadioactive decay · source-only count ratecountratetimeT½2T½3T½Equal time intervals halve the source contribution; the background does not halve.
Use two or more half-value pairs to check the half-life estimate.

VARIABLES

Name independent, dependent and controlled quantities.

REPEATS

Random counts need several equal-time readings and a mean.

PROCESS

Divide by time, subtract background and keep units.

EVALUATE

Check anomalies, limitations and percentage uncertainty.

  1. Use a simulator or teacher-supplied prerecorded dataset.
  2. Use a longer fixed counting interval to collect more events.
  3. Repeat every condition and calculate a mean.
  4. Measure background separately using the same detector/time unit.
  5. Subtract mean background from each mean measured rate.
  6. Plot the independent variable horizontally and corrected rate vertically.
  7. Investigate anomalous points; do not delete automatically.
percentage fluctuation becomes smaller when more counts are collected
ATP mnemonicCONTROL · COUNT LONG · REPEAT · MEAN · CORRECT · GRAPH

A vague “repeat for accuracy” is weaker than explaining that decay is random and a mean reduces fluctuation.

Safety: students do not handle, move, store or operate a radioactive source. All learner work uses digital simulations, diagrams or supplied measurements.
Quick Check · Why must absorber comparisons use equal counting times?
Then raw totals are comparable. If times differ, every total must first be converted to the same count-rate unit.
1
See the route before touching the numbers

One examiner decoder organises the whole of radioactivity

RADIOACTIVITY EXAMINER DECODERCORRECTmeasured −backgroundCLASSIFYabsorber + fieldevidenceBALANCEprotect A and ZHALVEsource part onlyCORRECT → CLASSIFY → BALANCE → HALVE
Classify the demand first: correct a count, classify radiation, balance a nuclear change or halve a source quantity.
DETECTOR → COUNTER → RATEinvestigationsupplied dataradiationdetectorCOUNTERM counts/mintimed readingbackground = Bmeasured = Msource = M − Bsource rate = measured rate −background rate
Detector questions begin by separating the measured total M from the background B.
HALF-LIFE LADDER800rateHALVE0400rateHALVET½200rateHALVE2T½100rate3T½number of half-lives = elapsed time /half-life
Half-life questions are repeated divisions by two, but only after any background component is removed.

Crest habit: draw four tiny ledgers: measured/background/source, nature/charge/penetration, A/Z, and time/number of halves. Most lost marks come from crossing information between those ledgers.

CORRECT

Source rate = measured rate − background rate.

CLASSIFY

Use absorber and field evidence together.

BALANCE

Protect upper A and lower Z separately.

HALVE

Convert elapsed time into half-life steps.

Choose a demand to reveal its examiner route.
Master mnemonicC · C · B · H

Correct → Classify → Balance → Halve. The order prevents background, particle identity and nuclide numbers from being mixed.

Command-word lens: “state” needs the fact; “deduce” needs evidence from the figure; “explain” needs a cause-and-effect link.
Quick Check · A detector reads 140 counts/min and background is 18 counts/min. What begins the solution?
Write source rate = 140 − 18 = 122 counts/min. Correct first, then use the source rate.
16
One-page examiner logic

Master radioactivity by protecting four separate ledgers

RADIOACTIVITY EXAMINER DECODERCORRECTmeasured −backgroundCLASSIFYabsorber + fieldevidenceBALANCEprotect A and ZHALVEsource part onlyCORRECT → CLASSIFY → BALANCE → HALVE
Start every question with Correct, Classify, Balance or Halve.
THREE NUCLEAR EMISSIONSα2 p + 2 ncharge +2ionising mostpenetration leastβ⁻electroncharge −1ionising mediumpenetration mediumγEM wavecharge 0ionising leastpenetration mostionisation and penetration run inopposite orders
Identity ledger: nature and charge explain absorber and field behaviour.
NUCLIDE-EQUATION LEDGERPARENTXAZemits α / β / γDAUGHTERY??alpha: −4, −2 · beta-minus: 0, +1 ·gamma: 0, 0
Equation ledger: balance A and Z separately.
Radioactive decay · measured rate includes constant backgroundRadioactive decay · measured rate includes constant backgroundcountratetimebackground 20T½2T½3T½Equal time intervals halve the source contribution; the background does not halve.
Half-life ledger: measure and halve the excess above background.
THREE PROTECTION PRINCIPLESTIMEreduce exposureDISTANCEincrease separationSHIELDINGabsorb radiationprecaution → lower exposure/dose → lowerrisk
Safety ledger: connect time, distance and shielding to lower dose.

1 · Detector ledger

rate = count/time; source = measured − background.

2 · Emission ledger

α: +2/heavy; β: −1/light; γ: neutral wave.

3 · Nuclear ledger

α: −4,−2; β: 0,+1; γ: 0,0.

4 · Half-life ledger

Subtract background, halve source, restore background only for a detector reading.

ionisation α > β > γ · penetration γ > β > α · fraction remaining = (1/2)n
Final chainCORRECT · CLASSIFY · BALANCE · HALVE

Then finish explanations with the causal phrase the examiner needs.

Final check · Measured 420, background 20, two half-lives later: detector reading?
Source initially 400; after two half-lives 100; restore 20 background → 120 counts/min.
Interactive mastery: 0 / 10 explored

Explore ten checkpoints, then train in Practice before entering Exam Arena.