PHYSICS CREST
Physics · Exam Mastery

Topic 1.7A · Energy and Work

Gravity in calculations: near Earth, g ≈ 9.8 m/s² (9.8 N/kg). Use the value supplied by the question, page instructions or activity; use 10 when it is specified.

See energy as an examiner sees it: name the stores, label the transfer pathway, conserve every joule and calculate with a disciplined route.

Core foundationsSupplement equationsATP energy evidenceInteractive notebook
ENERGY STORESTRANSFER PATHSOUTCOMESconservation keeps the total honestEk = ½mv²ΔEp = mgΔhW = Fd = ΔE
Track stores, name the transfer pathway, conserve the total, then calculate.
1
Where energy is located

Energy stores

  • Energy can be stored kinetically, gravitationally, chemically, elastically, nuclearly, electrostatically and internally.

Energy is a quantity that is stored in physical systems and transferred during events. Start every explanation by identifying what system has less energy and what system has more.

THE SEVEN NAMED STORESkineticgravitational potentialchemicalelastic (strain)nuclearelectrostaticinternal (thermal)stores are nouns · transfers are processes
Use the exact store names. Electricity, light and sound are transfer pathways, not stores.
Store mnemonicK G C E N E I

Kinetic · Gravitational potential · Chemical · Elastic · Nuclear · Electrostatic · Internal. Say it as “Kick Giants, Charge Elastic Nests—Electrons Inside.”

StoreRecognise it from…Exam-safe example
kineticmoving object or moving fluidrolling trolley, flowing water, wind
gravitational potentialheight in a gravitational fieldraised load, water behind a dam
chemicalfuel, food, cells or batteriesfuel before combustion
elastic (strain)stretched or compressed objectspring or elastic cord
nuclearatomic nucleinuclear fuel
electrostaticseparated chargescharged plates
internal (thermal)particle motion and arrangementwarm brakes or surroundings
chemical store in cellkinetic + internal storeselectrical workingSTORE DECREASESSTORE(S) INCREASE
Write the decreasing store, the transfer pathway and every important increasing store.
releaseelastic store ↓kinetic store ↑
The spring transfers energy mechanically to the trolley and surroundings.
Interactive · Store Spotter

Which store belongs to a moving trolley?

Choose one answer.
High-frequency trap: electricity, light, sound and heating are not stores. They describe transfer by currents, waves or heating.
One-mark precision: write “internal (thermal) energy store,” not just “heat energy.” Heat describes energy in transfer.
2
How energy moves between stores

Energy transfers

  • Mechanical work, electrical work, heating and waves describe transfer pathways rather than extra stores.
  • In a lamp, energy is transferred electrically to the lamp and then to surroundings by radiation and heating.
1forcesmechanical work2currentselectrical work3temperature differenceheating4wavesEM, sound or other
Name what moves between stores and the pathway that transfers it.
store decreases $\xrightarrow{\text{transfer pathway}}$ store(s) increase

By forces

A force acts through a distance: mechanical work is done.

By currents

Charges move through a circuit: electrical work is done.

By heating

A temperature difference causes energy transfer from hotter to cooler.

By waves

Electromagnetic, sound and other waves carry energy between systems.

kinetic store of cyclistinternal stores of brakes + roadmechanical work by frictionSTORE DECREASESSTORE(S) INCREASE
Write the decreasing store, the transfer pathway and every important increasing store.
chemical store in batterykinetic store of motor + internal storeselectrical workingSTORE DECREASESSTORE(S) INCREASE
Write the decreasing store, the transfer pathway and every important increasing store.
internal store of hot muginternal store of roomheatingSTORE DECREASESSTORE(S) INCREASE
Write the decreasing store, the transfer pathway and every important increasing store.
nuclear store in Suninternal store of absorberelectromagnetic wavesSTORE DECREASESSTORE(S) INCREASE
Write the decreasing store, the transfer pathway and every important increasing store.
Sentence frameFROM · BY · TO

Energy is transferred from the named decreasing store, by the named pathway, to the named increasing store(s).

Mark-scheme habit: separate the store from the pathway. “Chemical to kinetic” may earn store marks; adding “by electrical working” earns the pathway idea.
Quick Check · A lamp warms a black card across a gap. Give the complete energy statement.
The source store decreases; energy is transferred to the card by electromagnetic waves, increasing the card’s internal store.
3
The total is never lost

Conservation of energy

  • Friction transfers energy into internal stores.
  • Energy is not destroyed when dispersed; it often becomes less useful because it is spread across the surroundings.

The principle of conservation of energy states that energy cannot be created or destroyed; it is transferred between stores. For a closed accounting boundary, total input equals total output.

total energy before = total energy after
Energy accounting: input = useful + dissipatedEnergy accounting: input = useful + dissipatedinput 100 Juseful 65 Jdissipated 35 J
Conservation requires total output energy to equal total input energy.
8 m verticalfallsmass = 2 kg30 J to internal storeGPE → kinetic
Use vertical height change. If resistance acts, not all lost gravitational energy becomes kinetic energy.

Worked: a fall with resistance

An object loses 160 J from its gravitational store. Air resistance transfers 30 J to internal stores.

Kinetic energy gained $=160-30=130$ J.

ABC
At the lowest point the kinetic store is greatest; at an extreme position the gravitational store is greatest.
Interactive · Energy Balance

Find the unaccounted output

Other output = 90.0 J
“Wasted” does not mean destroyed. It means transferred to stores where the energy is less useful for the intended purpose—usually spread through internal stores.
Conservation statement: do not write only “energy is conserved.” Name the stores and quantify the balance when data are supplied.

Pause · explain it yourself

What changes when bicycle brakes slow a bicycle and warm up?

Energy transferred to the surroundings by heating is called wasted. What has happened to it?

4
Energy in motion

Kinetic energy

  • Kinetic energy is ½mv².
  • At fixed mass, doubling speed multiplies kinetic energy by four.
$E_k=\dfrac12mv^2$
mass 3 kg4 m/sEk = ½mv²
Square the speed before multiplying by half the mass.
  1. Convert mass to kilograms.
  2. Write the equation before substituting.
  3. Square the speed, not the whole expression.
  4. Multiply by mass and one half.
  5. Give energy in joules.

Worked: direct calculation

$E_k=\frac12(3.0)(4.0)^2=24$ J.

1v1Ek2v4Ek3v9Ek4v16Ekspeed multiplierkineticenergy
For fixed mass, doubling speed makes kinetic energy four times as large.
Scaling mnemonicSpeed gets the square

At fixed mass: double speed → four times $E_k$; triple speed → nine times $E_k$.

mass 0.8 kg15 m/sEk = ½mv²
Square the speed before multiplying by half the mass.
Interactive · Kinetic-Energy Engine

Change mass and speed

Ek = 24.00 J
Calculator trap: $\frac{1}{2}\times3\times4^2=24$, not 12 and not 144.
Rearrangement: to find speed, first obtain $v^2=2E_k/m$, then take the positive square root because the question asks for speed.
5
Energy from position in a field

Gravitational potential energy

  • Gravitational energy change is mgΔh in an approximately uniform field.
  • Use vertical height, not slope length.
$\Delta E_p=mg\Delta h$
12 kg3 m verticalg = 10 N/kgΔEp = mgΔh
Use the vertical change in height, not the distance travelled along a slope.

Use mass

If mass is given, multiply $m\times g\times\Delta h$.

Use weight

If weight is given, $ΔE_p=\text{weight}\times\Delta h$ because weight $=mg$.

vertical hbalance: masslight gate: speedmetre rule: height
Use modest speeds, secure the ramp, keep the run-out clear and repeat readings.
Ramp trap: the object may travel 5.0 m along a ramp but rise only 1.2 m. Use 1.2 m in $mgΔh$.

Worked: decrease

A 20 N object falls 7.0 m. The store change is $(20)(-7.0)=-140$ J: a decrease of 140 J.

12 m verticalfallsmass = 5 kgsome heating if air resistance actsGPE → kinetic
Use vertical height change. If resistance acts, not all lost gravitational energy becomes kinetic energy.
Interactive · GPE Calculator

Choose the sign of the height change

ΔEp = +150.00 J · increase
Communication: if the object falls, give “decrease of … J” or a negative change. Do not label a positive magnitude as an increase.

Pause · explain it yourself

Why is gravitational energy change the same for two paths between the same heights?

6
Energy transferred by a force

Work done

  • Mechanical work is energy transferred by a force through a displacement in its direction.
  • W = Fd applies directly when force and displacement are parallel.
  • One joule is one newton metre.
  • Choose the relevant displacement, not just any distance mentioned.
  • A supporting force does no mechanical work on a stationary bag during a hold, though the person’s body still uses energy internally.
  • A force perpendicular to displacement does no work through that displacement.
  • Applied-force work need not equal kinetic energy gain when other forces also transfer energy.

Mechanical or electrical work done equals energy transferred.

$W=Fd=\Delta E$
box35 N6 m
For a force parallel to the movement, work done is force multiplied by distance.

Worked: push a crate

$W=(35)(6.0)=210$ J. The force transfers 210 J mechanically.

A20 Ndistance 3 mB15 Ndistance 5 mC30 Ndistance 2 mD10 Ndistance 8 m
Calculate force × distance for each case.
Equation mnemonicForce through distance transfers energy

Newton × metre = joule. The stated distance must be along the force direction in this syllabus equation.

initial kinetic store60 N resistive4 m stopping distance
The resistive force transfers energy mechanically from the kinetic store to internal stores.
Interactive · Work Calculator

Parallel force and displacement

W = ΔE = 210.00 J
Unit trap: centimetres must become metres before multiplying by newtons if you want joules.
Braking route: kinetic energy decrease = work done by resistive force. This creates the useful bridge $\frac{1}{2}mv^2=Fd$ when the object stops.

Pause · explain it yourself

Does the supporting force do mechanical work on a bar held motionless overhead?

Your turn · Find work done by a 25 N force over 3.0 m in its direction.

Decimals and scientific notation are accepted. Compatible units are accepted.

7
Conservation drawn to scale

Sankey diagrams

  • In a Sankey diagram, arrow width represents energy or power consistently, and total output width equals total input width.
Energy accounting: input = useful + dissipatedEnergy accounting: input = useful + dissipatedinput 120 Juseful 72 Jdissipated 48 J
Conservation requires total output energy to equal total input energy.

A simple flow diagram names and quantifies transfers. A Sankey diagram adds a visual rule: arrow width is proportional to energy.

input 100 Juseful 65 Jdissipated 35 J
Arrow width represents energy. The widths leaving a junction add to the incoming width.
  1. Read the total input.
  2. Add every labelled output.
  3. Use input = useful + all dissipated outputs.
  4. For a missing width, subtract widths at the junction.
  5. Check that wider means more energy.
input 120 Juseful 90 Jdissipated 30 J
Arrow width represents energy. The widths leaving a junction add to the incoming width.
Interactive · Sankey Width Decoder

Find the missing branch width

Other output width = 3.00 mm
Not drawn to scale? If the figure explicitly says not to scale, calculate from the labelled values. If widths are the data, measure or subtract them as instructed.
Formal efficiency boundary: this page interprets useful fractions through conservation. The efficiency equations are taught fully in Topic 1.7B.
8
Hard questions become a ledger

Multi-stage energy changes

  • When resistance is negligible, lost gravitational energy can become kinetic energy.
  • If resistance matters, include internal energy and other outputs.
  • Write a conservation statement before inserting numbers.
  • Choosing a zero reference height does not mean gravity is absent there.
  • Take a square root only after isolating v².
XYZmotion
At lower points the gravitational store is smaller and the kinetic store is usually larger.
Exam routineB-S-T-C-A

Boundary → starting Stores → Transfer pathways → changed stores → Conserve → Answer with unit and direction of change.

12 m verticalfallsmass = 2.5 kg75 J to internal storeGPE → kinetic
Use vertical height change. If resistance acts, not all lost gravitational energy becomes kinetic energy.

Worked: two-stage ledger

Lost GPE $=(2.5)(10)(12)=300$ J.

Internal gain = 75 J, so kinetic gain $=300-75=225$ J.

$225=\frac{1}{2}(2.5)v^2$, hence $v=13.4$ m/s.

8.0 m/s200 N resistive12 m stopping distance
The resistive force transfers energy mechanically from the kinetic store to internal stores.
Energy accounting: input = useful + dissipatedEnergy accounting: input = useful + dissipatedinput 300 Juseful 225 Jdissipated 75 J
Conservation requires total output energy to equal total input energy.
Interactive · Multi-stage Ledger

Split lost GPE between kinetic and internal stores

Kinetic gain = 225.0 J
Multiple changes: if a lifted object also speeds up, the work input can equal gravitational gain + kinetic gain + dissipated transfer. Do not force the entire input into one store.
9
Alternative to Practical

ATP Lab Lens: turn energy claims into defensible measurements

vertical hbalance: masslight gate: speedmetre rule: height
Use modest speeds, secure the ramp, keep the run-out clear and repeat readings.
Practical mnemonicM-H-V-R-U

Measure Mass · vertical Height · speed/velocity Validly · Repeat · judge within Uncertainty.

QuantityMethodExaminer-sensitive detail
masszeroed balanceinclude flag and attachments
vertical heightmetre rule / plumb referencesame trolley reference point at both positions
speedlight gate or fixed videogate close to bottom; camera perpendicular
energycalculate $mgΔh$ and $\frac{1}{2}mv^2$SI units before substitution
Measure work with force parallel to displacementMeasure work with force parallel to displacementforce meterpull Fdisplacement d in the force direction
Pull steadily so the force is approximately constant and measure distance in the force direction.
Direct work technique: if the pulling force is approximately constant and parallel to the motion, measure the force and distance, then calculate $W=Fd$. Use newtons and metres so the answer is in joules.
Energy accounting: input = useful + dissipatedEnergy accounting: input = useful + dissipatedinput 100 Juseful 84 Jdissipated 16 J
Conservation requires total output energy to equal total input energy.
LimitationEffectTargeted improvement
height measured along rampGPE overestimatedmeasure vertical separation
push at releaseextra kinetic energyuse a repeatable gate/release with no push
gate far from bottommore energy dissipates before readingplace gate close to comparison position
camera angleddistance distortedcamera perpendicular, scale in plane of motion
one readingrandom spread unknownrepeat, mean and retain justified anomaly notes
Safety: secure ramps and stands, use modest trolley speeds, keep the run-out clear, keep faces and hands outside the launch line, and switch off motors before adjustment.
Conclusion wording: “The values agree within experimental uncertainty, supporting conservation,” or “The kinetic value is consistently smaller because energy transfers to internal stores.” Never claim proof from one trial.
10
One-page visual recall

Topic 1.7A Master Sheet

ENERGY STORESTRANSFER PATHSOUTCOMESconservation keeps the total honestEk = ½mv²ΔEp = mgΔhW = Fd = ΔE
Track stores, name the transfer pathway, conserve the total, then calculate.

Equation bank

$E_k=\frac{1}{2}mv^2$
$ΔE_p=mgΔh$
$W=Fd=ΔE$
input = useful + dissipated

Memory board

KGCENEI · seven stores
FROM–BY–TO · explanation frame
Speed gets the square · kinetic energy
Vertical height · gravitational energy
Widths add · Sankey
BSTCA · multi-stage ledger
THE SEVEN NAMED STORESkineticgravitational potentialchemicalelastic (strain)nuclearelectrostaticinternal (thermal)stores are nouns · transfers are processes
Use the exact store names. Electricity, light and sound are transfer pathways, not stores.
1forcesmechanical work2currentselectrical work3temperature differenceheating4wavesEM, sound or other
Name what moves between stores and the pathway that transfers it.
input 100 Juseful 70 Jdissipated 30 J
Arrow width represents energy. The widths leaving a junction add to the incoming width.
If the question shows…First move
an event descriptionidentify decreasing store, pathway and increasing stores
speed and massconvert kg, square speed, use $\frac{1}{2}mv^2$
heightfind vertical $Δh$ and use $mgΔh$
force through distanceuse $Fd$ and connect to $ΔE$
several outputsbuild a conservation ledger
Sankey diagrammake widths and labelled energies balance
ATP comparisonmeasure mass, vertical height and speed; repeat
Final answer audit: store or pathway? kilograms? speed squared? vertical height? centimetres converted? every output counted? joules attached? decrease/increase communicated?
Interactive mastery: 0 / 6 explored

Use all six explorers, then revisit the method that still takes longest.