Gravity in calculations: near Earth, g ≈ 9.8 m/s² (9.8 N/kg). Use the value supplied by the question, page instructions or activity; use 10 when it is specified.
Use mass and volume with confidence: calculate density, measure it with the right method, spot practical errors, and predict floating or liquid-layer order.
Core density masterySupplement liquid layersATP measurement labInteractive notebook
Density is calculated from measured mass and volume, then used to predict how objects and non-mixing liquids arrange.
1
Mass packed into space
Density
DensityMass divided by volume.
A density of 2.7 g/cm³ means each cubic centimetre has mass 2.7 g for a uniform sample.
Making a larger sample of the same material increases mass and volume in the same ratio, leaving density unchanged under the same conditions.
Density is the mass per unit volume of a substance.
For equal volumes, the sample containing more mass has the greater density.
$\rho=\dfrac{m}{V}$
Keep the quantity, instrument and unit matched.
Definition mnemonicDENSE = DIVIDE mass by SPACE
Ask: “How much mass is packed into each unit of volume?”
Same volume
More mass means greater density.
Same mass
Smaller volume means greater density.
At fixed volume, compare mass to compare density.At fixed mass, the smallest volume has the greatest density.
Definition mark: write “mass per unit volume.” “How heavy something is” does not identify volume and is not a density definition.
Material-property precision: a pure material under the same conditions has a characteristic density. Temperature, pressure, composition or trapped spaces can change the measured value.
Pause · explain it yourself
Why should different-sized samples of a uniform metal have the same density?
Compare, then improve
Their mass and volume change in the same proportion, leaving m/V constant.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
2
Choose · unify · substitute · finish
Density calculations and units
Use compatible units: g/cm³ or kg/m³.
Because 1 g is 0.001 kg and 1 cm³ is 0.000001 m³, 1 g/cm³ equals 1000 kg/m³.
Cubic conversions require three length factors; dividing a cubic-centimetre value by 100 is not a valid volume conversion.
Cover the required symbol: ρ = m/V, m = ρV, and V = m/ρ.
Measure the mass of the empty, dry container—or tare it.
Add a known liquid volume and read its meniscus at eye level.
Find liquid-only mass, then divide by liquid volume.
Place the eye level with the meniscus to avoid parallax.
Meniscus rule: for a concave water-like meniscus, read the bottom at eye level. State “eye level” and “avoid parallax”; do not merely write “read carefully.”
Use the changes: added mass divided by added volume.
Change method
$\Delta V=65-25=40\text{ cm}^3$ and $\Delta m=34\text{ g}$.
Container trap: using the full mass as the liquid mass makes density too large because unrelated container mass is included.
Pause · explain it yourself
Why must the empty container mass be subtracted in the liquid method?
Compare, then improve
The measured volume belongs only to the liquid, so the density calculation must use only the liquid mass.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
4
Geometry creates the volume
Density of a regular solid
For a regular rectangular solid, measure three perpendicular dimensions and multiply them.
Measure first, calculate the geometrical volume, then divide mass by volume.For a cuboid, calculate V = length × width × height before finding density.
$V_{cuboid}=lwh$
Worked: alloy block
$V=(8.0)(5.0)(2.5)=100\text{ cm}^3$.
$\rho=270/100=2.70\text{ g/cm}^3$.
A uniform prism has volume = cross-sectional area × length.
Use a balance for mass and a suitable length-measuring instrument for the dimensions. Choose an instrument that gives a clear, precise reading for the size of the object.
Reliability
Repeat a dimension at several positions if the object may not be perfectly uniform; calculate a mean.
Show the geometry line. Examiners often award a separate mark for calculating volume before the density substitution.
Do not use water displacement by habit. For a regular solid, dimensions and geometry usually give a cleaner, syllabus-standard method.
5
A sinking object displaces its own volume
Density by displacement
For an irregular solid that sinks, use water displacement: it must be fully submerged, insoluble and free from trapped air.
Record water volume before and after adding it.
The object volume is the final reading minus the initial reading.
$V_{object}=V_{final}-V_{initial}$
Worked: sinking stone
$V=47-32=15\text{ cm}^3$.
$\rho=45/15=3.0\text{ g/cm}^3$.
Measure the dry object mass on a zeroed balance.
Record the initial water volume at eye level.
Lower the object with thin thread until fully submerged.
Remove trapped bubbles; avoid the sides and bottom.
Record the final reading and subtract.
Fill to the spout, wait for dripping to stop, immerse fully, collect every drop and measure its volume.
Displacement mnemonicI-F-D-D
Initial → Final → Difference gives volume → Divide mass by volume.
Air bubbles increase the apparent volume but not the sample mass.Any submerged thread volume is included in the measured displacement.
Problem
Measured volume
Calculated density
Fix
air bubbles attached
too large
too small
tap/remove bubbles
thick submerged thread
too large
too small
use fine thread or correct for it
object not fully submerged
too small
too large
submerge completely
Using several identical small objects produces a larger scale change and reduces percentage uncertainty.
Interactive · Displacement Calculator
Use final minus initial
Current assessment route: the required irregular-solid method is for an object that sinks and can be fully submerged without extra apparatus.
6
Compare average object density with liquid density
Floating, sinking and liquid layers
Compare average object density with the surrounding liquid density.
A less dense object can float; a denser one sinks if freely released without other support.
At rest while floating, upward force balances weight.
Weight does not disappear.
A hollow metal vessel can float because its total mass divided by its overall displaced-volume capacity is much smaller than solid metal density.
For two liquids that do not mix, the less dense liquid forms the upper layer.
Always state the non-mixing condition: density differences alone do not guarantee separate layers.
Less dense floats, greater density sinks, and equal density gives neutral suspension.
The same object may sink in one liquid and float in another.
The same object sinks in liquid A because it is denser than A, but floats in liquid B because it is less dense than B.
Equal densities correspond to neutral suspension, ignoring disturbances.
Equal-density correction: equal densities do not mean “must sink.” Ignoring disturbances, the object is neutrally suspended.
For a sealed hollow object, compare the average density of the whole object with the liquid.
A metal shell can float if trapped air makes the average density of the complete sealed object less than the liquid density. Mass alone cannot decide.
Immiscibility allows persistent layers; density determines their order.
Immiscibility
Explains why persistent separate layers form.
Density
Orders the layers: least dense at the top, most dense at the bottom.
The object sinks through less-dense layers and rests on the first denser layer.
Interactive · Float Comparator
Compare object and liquid density
Interface reasoning: an object sinks through every layer less dense than itself and rests on the first denser layer. If densities are equal, neutral suspension is possible within that layer.
Pause · explain it yourself
Does a floating object have zero resultant force or zero weight?
Compare, then improve
Zero resultant force when at rest. Its weight is non-zero and balanced by the upward force.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
7
Alternative to Practical
ATP Lab Lens: obtain a defendable density
All routes end with the same density equation; only the volume method changes.
Practical planZ-M-V-R-C
Zero → measure Mass → obtain Volume → Repeat → Calculate with units.
SET UP
Dry apparatus, zero the balance, choose a scale that gives a large reading change.
MEASURE
Eye level, no spills/bubbles, full immersion, repeated readings and units in headings.
Record raw repeated values with units before calculating a mean.For mass vertically against volume horizontally, gradient Δm/ΔV is density.
$\text{gradient}=\dfrac{\Delta m}{\Delta V}=\rho$
Interactive · Gradient Calculator
Choose two well-separated best-fit points
Limitation
Effect
Targeted improvement
small displacement
large percentage uncertainty
narrow cylinder or several identical objects
meniscus parallax
reading shifted
eye level with meniscus
container mass retained
mass–volume graph intercept
tare/subtract empty mass
one reading only
random variation hidden
repeat and average concordant values
The change in balance reading is the gas mass; divide it by the fixed container volume.
Gas-density logic: use the same sealed container before and after gas removal. The balance change is gas mass; the fixed container volume is gas volume.
Evaluation chain: limitation → directional effect on mass/volume/density → improvement that attacks that exact cause. “Be more careful” is not a complete improvement.
8
One-page visual recall
Topic 1.4 Master Sheet
The exam path is measure, match units, calculate, then compare densities when required.
Equation bank
$\rho=m/V$
$m=\rho V$
$V=m/\rho$
$V_{object}=V_f-V_i$
$\rho=\text{gradient of }m\text{ against }V$
Memory board
DENSE · mass divided by space
CUSF · calculation routine
IFDD · displacement
LEG · float comparison
ZMVRC · ATP method
If the question shows…
Your first move
mass and volume
match units, then $m/V$
filled and empty container
subtract to isolate liquid mass
regular solid dimensions
calculate geometrical volume first
irregular sinking object
final minus initial displacement
object and liquid densities
compare: less / equal / greater
non-mixing liquid data
calculate density, least dense on top
mass against volume graph
gradient is density; inspect intercept
Final answer audit: correct quantity isolated? compatible units? volume cubed? subtraction shown? final unit included? float/layer statement explicitly linked to density?
Interactive mastery: 0 / 6 explored
Revisit any calculator or comparator you have not yet used.