PHYSICS CREST
Physics

Topic 1.1 · Physical quantities and measurement techniques

Gravity in calculations: near Earth, g ≈ 9.8 m/s² (9.8 N/kg). Use the value supplied by the question, page instructions or activity; use 10 when it is specified.

Learn how to read a scale, measure small quantities, time complete cycles and combine perpendicular forces or velocities. Each worked example shows what to read, what to calculate and why the method works.

Core measurement masterySupplement vector thinkingATP visual techniquesInteractive notebook
MEASUREread · subtract · divideLENGTHruler · multiplesVOLUMEcylinder · displacementTIMEintervals · cyclesVECTORSmagnitude · direction
One topic, four visual languages: scales, differences, repeated intervals and direction.
2
Subtract · align · enlarge

Physical quantities and measuring length

Physical quantity

A measured property expressed by a numerical value and a unit.

  • In 7.5 cm, 7.5 is the numerical value and cm is the unit.
  • The number alone does not tell you the physical size.

Measuring a length

  • A ruler reading locates an endpoint; length is the difference between two endpoint readings.
  • Identify two numbered marks, subtract their values and divide by the number of equal spaces.
  • Count spaces rather than lines.
  • When one thickness is too small to read reliably, measure many identical thicknesses together and divide by their number.
  • For wire, tightly adjacent turns must have no gaps or overlaps.

A ruler does not measure “where the object ends.” It supplies two position readings. Their difference gives the length.

$L=L_{\text{end}}-L_{\text{start}}$
block from 1.7 to 5.3 on a centimetre ruler0123456blockcm1.75.3
The zero mark is not required. Read both ends and subtract.

Worked: damaged zero

Start = 1.7 cm and end = 5.3 cm.

$L=5.3-1.7=3.6\text{ cm}$.

A fixed zero offset is added to both readings, so it cancels when you subtract them. This does not correct a stretched or wrongly calibrated scale.

Ruler alignment checklist

  • scale close and parallel to the dimension;
  • object edges perpendicular to the scale;
  • eye normal to the reading;
  • read the real edge, not a shadow;
  • quote a supported precision and unit.
metal plate; horizontal readings 1, 8 cm; vertical readings 1, 5 cmmetal plate0123456789100123456cmcm
For a rectangle, obtain width and height from separate pairs of readings, then multiply.

Worked: area from two rulers

Width $=8-1=7$ cm. Height $=5-1=4$ cm.

Area $=7\times4=28\text{ cm}^2$.

Technique: subtract first; multiply second.

The “measure many” superpower

If one object is too small to measure well, measure many together and divide by the count. The ruler reading uncertainty stays about the same, but the total length is larger, so the uncertainty is a smaller fraction of the measurement.

From total to one object

Sheets: $18.0/200=0.0900$ mm per sheet.
Beads: $32.0/40=0.800$ cm per bead.
Wire: $27.0/18=1.50$ mm diameter.

In each case, divide the measured total by the number of objects or turns. Keep the units of the measured total.

MnemonicM-M-D

Make many → Measure total → Divide by count.

Interactive · Offset Ruler

Move both ends

The coloured strip represents the object. Notice that its length depends on the difference, not the end reading alone.

Length = 6.4 cm
Gaps destroy the method: if beads or turns are separated, the measured total includes empty space and the calculated diameter becomes too large.
A ruler starts at 2.3 cm and finishes at 8.7 cm. What length is measured?

3
Meniscus · difference · submersion

Measuring volume

Reading a liquid volume

  • A damaged zero need not prevent measurement if two undamaged readings can be taken.
  • For water in a cylinder, place it upright and view the bottom of the meniscus at eye level.
  • Looking from above or below introduces parallax: an apparent displacement relative to the scale.
  • A wide beaker usually gives less precise small-volume readings than a suitably sized cylinder.

For liquid volume, first choose a cylinder whose range contains the volume and whose divisions are fine enough. Place it upright on a level surface and let the liquid settle.

20 to 30 cm³ with 5 equal intervalsEnlarged scale20 cm³30 cm³Level indicated by the arrow
The 10 cm³ labelled gap contains five spaces, so each division is 2 cm³. The level shown is 26 cm³.
Side view: scale, water meniscus and eye positions P above, Q level, R belowwater meniscusPQRscaleQ: eye level with the reading
Read the bottom of the concave meniscus with the eye at the same height. The correct line of sight is horizontal.
Reading routineLEVEL

Liquid settled → Eye level → Lowest point of water meniscus → Even scale spaces → Label with unit.

Irregular solid: displacement

$V_{\text{object}}=V_{\text{final}}-V_{\text{initial}}$
before: 42 cm³; stone submerged: 67 cm³050100cm³before42050100cm³stone submerged67
Only the rise in cylinder reading is the object volume. Check full submersion and trapped bubbles.

Quality checks

  • object completely submerged;
  • no trapped bubbles;
  • no lost or splashed water;
  • thin thread if needed;
  • read both levels consistently.

Worked

$V=67-42=25\text{ cm}^3$.

The final reading alone is not the object volume because it includes the original water.

Floating solid: cancel the sinker

water: 50 cm³; water + sinker: 62 cm³; water + both: 79 cm³050100cm³water50050100cm³water + sinker62050100cm³water + both79
Both readings must contain the same amount of water, with the sinker fully submerged. In the second reading the cork must also be fully submerged. Thin thread is assumed to displace negligible water.
$V_{\text{floating object}}=V_{\text{sinker+object}}-V_{\text{sinker}}$
Keep the water amount unchanged: if you remove a wet sinker to attach the cork, restore the initial water volume before the next trial. Do not let water spill or absorb into the object during the measurement. Use fully submerged objects and a thin thread of negligible volume.
Interactive · Cylinder Scale

Build the reading

A scale runs from 40 cm³ to 50 cm³ in 10 equal spaces. Choose the level’s division number above 40.

Reading = 47 cm³
Diameter trap: moving the same object between narrow and wide cylinders changes the height rise, but not the displaced volume. Cylinder readings are volume, not liquid height.

Pause · explain it yourself

Why is eye-level viewing important when reading a measuring cylinder?

4
Differences · intervals · cycles

Measuring time and period

Timing a complete oscillation

  • For a pendulum choose a reference position and a direction.
  • One complete oscillation ends at that same position travelling in that same direction.
  • The starting position represents zero completed oscillations.
  • Time many cycles, then divide by the number.
  • Repeating whole measurements and averaging improves reliability; a longer interval reduces the fractional effect of reaction-time error rather than eliminating it.

A timer display is a clock reading. The duration is the change between finish and start.

$\Delta t=t_{\text{finish}}-t_{\text{start}}$
Timer readings 03:18.42 and 03:47.8603:18.42Start03:47.86FinishDisplay: minutes : seconds . hundredths
Elapsed time = finish − start = 47.86 − 18.42 = 29.44 s. If a reading crosses a minute boundary, first convert minutes to seconds.

Sightings are not intervals

11 successive pass events; 16.0 s from pass 1 to pass 111234567891011Every pass shown in order16.0 s from pass 1 to pass 11
A matching sighting means the same position and direction. The first sighting starts the timer; it is not a completed interval.
$\text{intervals}=\text{matching sightings}-1$

Period of a pendulum

Pendulum, 20 complete oscillations, 31.6 sFixed reference line31.6 s20 complete oscillationsThree positions of the same pendulum
Start and stop at the same reference point moving in the same direction. Time many complete oscillations.
$T=\dfrac{\text{time for }N\text{ complete oscillations}}{N}$
MnemonicS-P-S-D

Start and stop at the Same Point moving in the Same Direction.

Worked

20 oscillations take 31.6 s.

$T=31.6/20=1.58\text{ s}$.

Why many cycles?

Starting and stopping by hand introduces reaction-time uncertainty. Timing many cycles makes the total interval longer, so that uncertainty is a smaller fraction of it. Divide by the number of complete cycles. This does not remove a consistently faulty timer or counting method.

Repeated readings of elapsed time / s: 24.3, 24.1, 26.8STOPWATCHNew timing each trialtrialelapsed time / s124.3224.1326.8
The third value is inconsistent with the first two. Repeat it; do not hide it.
Interactive · Interval Counter

How many complete intervals?

Move the slider to choose the number of matching sightings.

11 complete intervals
Reliability: repeat the complete many-cycle timing and keep all raw readings. Check and repeat any result that is far from the others. Exclude a reading only for a justified reason, such as a confirmed counting mistake; then average the valid readings.

Pause · explain it yourself

A learner times ten oscillations in 18 s and reports 180 s per oscillation. Correct the reasoning.

Your turn · Find the period when 15 oscillations take 24.0 s.

Decimals and scientific notation are accepted. Compatible units are accepted.

5
Supplement · magnitude is not enough

Scalars and vectors

Magnitude and direction

  • A scalar has magnitude only; a vector has magnitude and direction.
  • Units are needed for both.
  • Mass, speed, time, energy and temperature are scalars.
  • Force, weight, velocity, acceleration and momentum are vectors.

A scalar has magnitude only. A vector has magnitude and direction. A unit never decides the classification by itself.

SCALARmagnitude only12 m/sdistance · speed · timemass · energy · temperatureVECTORmagnitude + direction12 m/s eastforce · velocity · accelerationmomentum · field strength
A unit does not decide the type. Ask whether changing direction changes the quantity.
ScalarsVectors
distance, speed, time, mass, energy, temperatureforce, weight, velocity, acceleration, momentum, electric field strength, gravitational field strength
Decision testM or M+D?

If a complete answer needs only magnitude, it is scalar. If it needs magnitude + direction, it is vector.

Which is a complete force description?

High-value traps

  • speed is scalar; velocity is vector;
  • weight is a force, so it is vector;
  • field strength has direction, so it is vector;
  • “east” without a magnitude is still incomplete.

Examiner finish

For a calculated vector, give the magnitude, unit and an unambiguous direction such as 37° north of east.

Pause · explain it yourself

Are 6 m/s east and 6 m/s west the same velocity?

6
Perpendicular forces and velocities

Resultant vectors

Combining perpendicular vectors

  • Equal speeds do not imply equal velocities if directions differ.
  • For perpendicular forces or velocities, draw the arrows from a common point and complete a rectangle.
  • Its diagonal from that point is the resultant.
  • Pythagoras finds its magnitude; a scale drawing or trigonometry supplies direction.
  • This syllabus calculation is limited to perpendicular forces or velocities, rather than arbitrary advanced vector algebra.

A resultant is the single vector with the same overall effect as the component vectors. For two perpendicular components, the vector triangle is right-angled.

ring: 6 N east and 8 N north perpendicular; resultant construction6 N east8 N northringresultant
For perpendicular components, use Pythagoras for magnitude and trigonometry for direction.
$R=\sqrt{x^2+y^2}$    $\tan\theta=\dfrac{\text{opposite}}{\text{adjacent}}$
MagnitudeS-A-R

Square components → Add → square Root.

DirectionT-A-R

Tan ratio → inverse-tan Angle → state Reference direction.

Worked

$R=\sqrt{6^2+8^2}=10\text{ N}$.

$\theta=\tan^{-1}(8/6)=53.1°$ north of east.

The reference direction is part of the answer.

measured resultant from 0 to 4.6 on a centimetre ruler012345measured resultantcm04.6Scale: 1.0 cm represents 2.0 N
Measure the arrow length, then convert using the stated diagram scale.
  1. Choose and state a sensible scale.
  2. Draw the first arrow accurately to scale.
  3. Draw the perpendicular second arrow head-to-tail.
  4. Join the original tail to the final head.
  5. Measure length and angle; convert length using the scale.
Interactive · Resultant Explorer

Change the perpendicular components

Resultant = 10.0 N at 53.1° north of east
Reasonableness: a perpendicular resultant must be larger than either component but smaller than their arithmetic sum.
7
Alternative to Practical

ATP Lab Lens: make every method reproducible

Write a method another student could follow. State what to measure, how to control the conditions, how to calculate the result and how to check it.

Practical mnemonicZ-E-R-O

Zero/check the instrument → Eye level and alignment → Repeat and resolve anomalies → Organise data with headings and units.

PLANSpecify the method

apparatus, range, variables, controls, sequence and enough detail to reproduce it.

RECORDProtect raw data

headings with units, consistent precision, repeats and visible anomalies.

PROCESSTurn data into evidence

differences, means, graphs, conclusions and specific evaluation.

Repeated readings of time for 20 cycles / s: 32.4, 32.2, 32.3STOPWATCHNew timing each trialtrialtime for 20 cycles / s132.4232.2332.3
Write quantity and unit once in the heading; keep raw readings at consistent precision.
Weak phraseExam-ready replacement
“Measure carefully.”Place the eye level with the meniscus to reduce parallax.
“Repeat it.”Repeat the complete measurement at least twice more. Investigate suspected anomalies, justify any exclusion and average the valid results.
“Use better equipment.”Use a smaller-range cylinder with finer divisions that still contains the required volume.
“Human error.”Name the mechanism: reaction time, parallax, gaps, trapped bubbles or zero offset.
Evaluation = limitation + effect + targeted improvement. “Bubbles may increase the displaced volume, so tap the object gently and check that no bubbles remain before reading.”
Comparison technique: accuracy means closeness to a reference value; repeatability means getting similar results under the same conditions; resolution is the smallest scale division or displayed increment. Repeats help with random variation, but do not remove a fixed bias. Judge agreement using the measurement uncertainty or a stated tolerance, not an invented percentage rule.
1
See the instrument before touching the numbers

The measurement decoder

Before calculating, ask: what am I measuring, which instrument fits, and what does one scale division represent? Use the same steps for familiar and unfamiliar instruments.

1NAMEquantity2CHOOSEapparatus3DECODEscale4READwithout parallax5RECORDvalue + unit
Mnemonic: N-C-D-R-R — Name, Choose, Decode, Read, Record.
MnemonicN-C-D-R-R

Name the quantity → Choose apparatus → Decode the scale → Read correctly → Record value and unit.

Ruler, measuring cylinder and digital timerlengthliquid volume00:24.60time
Match the quantity to an apparatus, check the range and resolution, then apply the correct reading technique.

Decode one small division

  1. Choose neighbouring labelled marks.
  2. Find their numerical gap.
  3. Count the equal spaces, not boundary lines.
  4. Divide gap by spaces.
GSD: labelled Gap ÷ equal Spaces = one Division.

Record so someone else can understand

  • Write the quantity and unit in the heading: time / s.
  • Keep repeated raw readings at consistent precision.
  • Do not add unsupported decimal places.
  • Include the unit for a measured quantity. A count, such as the number of turns, has no unit.
Interactive · Scale Decoder

Can you decode any evenly divided scale?

Enter the labelled gap and the number of equal spaces.

Try it before revealing the result.
Exam trap: six tick lines enclose five spaces. If the labelled difference is 10 units, one division is 10 ÷ 5 = 2 units—not 10 ÷ 6.
Instrument choice: choose a range large enough to contain the measurement, then prefer the finer useful resolution. A huge range with coarse divisions usually wastes precision.
8
One-page visual recall

Topic 1.1 Master Sheet

Operations

$L=L_2-L_1$
$V_{object}=V_2-V_1$
$T=t_N/N$
$R=\sqrt{x^2+y^2}$

Memory board

GSD · Gap ÷ Spaces = Division
MMD · Make many, Measure, Divide
SPSD · Same Point, Same Direction
SAR / TAR · magnitude / direction
ZERO · practical quality
If the figure shows…Your first thought
object not starting at zeroend reading − start reading
many identical tiny objectsmeasure total ÷ count
two cylinder levelsfinal − initial
matching passes or sightingsintervals = sightings − 1
perpendicular arrowsPythagoras + referenced direction
ATP setupZERO + repeats + processed evidence
Final answer scan: sensible value, correct unit, supported precision and—when the quantity is a vector—an unambiguous direction.
Interactive mastery: 0 / 5 explored

Revisit any lab you have not yet changed or answered.