PHYSICS CREST
Physics

Topic 4.1 · Simple Phenomena of Magnetism

Gravity in calculations: near Earth, g ≈ 9.8 m/s² (9.8 N/kg). Use the value supplied by the question, page instructions or activity; use 10 when it is specified.

Prove magnetism with repulsion, predict induced poles, read every external field arrow from N to S, and judge strength from spacing—not guesswork.

Pole logic & proofInduced magnetismField interactionsCompass-field ATP
Magnetic field: outside N → S; inside S → NMagnetic field: outside N → S; inside S → NNSField lines form continuous loops; arrows give the force direction on a north pole.
Field arrows show the force direction on a north pole; closer spacing represents greater strength.
1
Start with the facing ends

Magnetic poles

NS
A complete bar magnet has a north pole and a south pole; an isolated pole is not part of this model.
NN
Like poles repel: N-N and S-S give forces away from one another.
NS
Unlike poles attract: N-S gives forces towards one another.
NSNobserved turn
A suspended magnet turns because magnetic forces create a turning effect.

Read only the ends that face. A long magnet may show several labels, but the immediate interaction is set by the two nearby poles. Like poles repel; unlike poles attract. Both objects experience forces in opposite directions.

Which pair gives attraction?
Facing polesInteractionMotion if free
N-S or S-Nattractiontowards each other
N-N or S-Srepulsionaway from each other
MnemonicSAME SHOVE · DIFFERENT DRAW

Same poles shove apart; different poles draw together.

Motion questions: draw a force arrow on the moving object first. Then decide whether that arrow points towards the other object (attraction) or away (repulsion).
Force-pair trap: opposite interaction forces act on different objects. They do not cancel on one magnet.
Quick Check · Can a bar magnet have two north poles?
No. In the bar-magnet model, the two ends are opposite poles: one north and one south.
2
Repulsion is proof

Testing for a magnet

  • Like magnetic poles repel and unlike poles attract.
  • A magnet also attracts initially unmagnetised magnetic material by inducing magnetism.
  • The near end becomes an unlike pole, and its stronger attraction gives a net attractive effect.
  • Therefore attraction to a known magnet does not alone prove an object is a permanent magnet.
  • Repulsion is the decisive test.
MAGNETIC TEST RECORDtest poleunknown endobservationknown Nrod end Jrepelsknown Srod end Jattractsknown Nrod end Kattracts
One repulsion result proves the tested unknown is magnetised.
NSNattraction
An unmagnetised magnetic rod can attract a magnet because an opposite near pole is induced.
NSironmovessteelmovescopperno movementplasticno movement
A non-magnetic sample shows no magnetic response; a magnetic material can be attracted without already being a magnet.
force sensordirection shownrod on pivotNfixed gap
A freely moving support or force sensor makes attraction, repulsion and no response easier to distinguish.
repulsion ⇒ both tested objects are magnetised
Which observation proves the unknown is a magnet?
  1. Use a known magnet.
  2. Test both ends of the unknown with a known pole.
  3. If any arrangement repels, the unknown is magnetised.
  4. If it attracts both poles but never repels, it may be an unmagnetised magnetic material; attraction alone is not proof of a magnet.
  5. If neither pole gives a response, it is non-magnetic under the test conditions.
MnemonicREPEL = REVEAL

Repulsion reveals a magnet. Attraction can be borrowed by induction.

Safest conclusion: if the data show attraction to both poles, write “magnetic material, not proven magnetised.” This is stronger than guessing a pole.
Metal trap: not every metal is magnetic. Iron and steel are magnetic here; copper and aluminium are treated as non-magnetic.
Quick Check · P repels Q, while R attracts P. What is proved?
P and Q are magnets. R is magnetic, but attraction alone does not prove that R is magnetised.

Pause · explain it yourself

Why does attraction to a north pole not prove an object is a permanent magnet?

Which observation gives decisive evidence that an object is a magnet?

3
Opposite pole appears nearest

Induced magnetism

NSNattraction
A north pole induces south at the near end and north at the far end.
SNSattraction
Reverse the inducing pole and both induced poles reverse.
Magnetic induction: touching iron pieces form a chainMagnetic induction: touching iron pieces form a chainNSNSsoft iron 1NSsoft iron 2NSsoft iron 3Pole nearest S becomes N.Adjacent unlike poles attract.When the magnet is removed, soft iron loses most of its induced magnetism.
Each temporarily magnetised object can induce magnetism in the next object.
force sensorreading / Niron sphereSsmall gap
Either magnet pole attracts an initially unmagnetised iron object.

Bring a magnet close to iron or steel and its magnetic regions become more aligned. The end nearest the magnet becomes the opposite pole; the far end becomes the other pole. The closer unlike pair produces attraction.

Interactive · Induced-pole predictor

Choose the nearby magnet pole

Nearby N → near end S, far end N → attraction.
inducing pole N → near S · far N   |   inducing pole S → near N · far S
MnemonicNEAR = NOT THE SAME

The induced pole nearest the magnet is opposite to the nearby pole.

Full explanation chain: “opposite pole induced at the nearer end → unlike poles attract.” Naming induction without the pole-and-force link may miss the explanation mark.
Temporary does not mean non-magnetic: the object is magnetic while the inducing field is present; it simply may not retain much afterwards.
Quick Check · Why can the second pin lift a third pin?
The second pin becomes temporarily magnetised and induces an opposite pole on the nearer end of the third pin.
4
Response versus retention

Magnetic materials

  • Iron, steel, nickel and cobalt are magnetic materials; not every metal is magnetic.
  • Copper and aluminium are useful non-magnetic examples.
  • Name the material rather than casually calling all metal magnetic.
  • Soft iron magnetises readily and loses much of its magnetism when the influence is removed.
  • Steel retains magnetism more strongly.
  • Use soft iron where magnetism must switch off, and steel for a persistent magnet.
  • An electromagnet’s current can control attraction and release.
rod Prod Qcorefield on: 12 clipsfield off: 1 clipscorefield on: 10 clipsfield off: 7 clipscompare after the field isremoved
Both rods respond while magnetised, but their behaviour after removal separates temporary from permanent.
time after removalclips liftedrod Arod B
A steep fall to almost zero matches low-retention soft iron; a persistent response matches steel.
low-voltagesupplyswitchmagnetic loadsoft-iron core
A lifting electromagnet needs strong response when on and clean release when off.
NSsteel retains magnetism
A permanent bar magnet is commonly made from steel because it retains magnetism.
MaterialMagnetisingAfter field removedBest role
soft ironeasyloses most magnetism readilytemporary magnet / electromagnet core
steelharderretains magnetism for a long timepermanent magnet
Choose a crane core that releases when switched off.
MnemonicSOFT = SWITCH · STEEL = STAY

Soft iron follows the switch; steel stays magnetised for much longer.

Use-property link: never stop at “soft iron.” Add “easy to magnetise and loses magnetism readily,” then connect that to lift/release.
Language precision: avoid “steel stays magnetised forever.” Say it retains magnetism for a long time.
Quick Check · Which result identifies the better temporary core?
A large magnetic effect while the field is on and a very small remaining effect after it is removed.

Pause · explain it yourself

Why is soft iron suitable for a lifting electromagnet that must release its load?

5
A force map, not visible threads

Magnetic fields

Magnetic field: outside N → S; inside S → NMagnetic field: outside N → S; inside S → NNSField lines form continuous loops; arrows give the force direction on a north pole.
Field lines are a model used to represent the pattern, direction and relative strength of a field.
NS
A test pole experiences a force in the field even without touching the magnet.
FIELD DEFINITION LOCKregionaround a magnettest objectmagnetic poleevidenceforce is experienceddirectionforce on a north pole
Use the observation, not the object appearance, to make the magnetic inference.
force sensorforce directionnorth test polemagnetfixed gap
The field direction at a point is defined using the force on a north pole.
magnetic field = region in which a magnetic pole experiences a force

Field lines are not physical strings. They are a drawing language: the tangent gives direction, arrows use a north test pole, and spacing represents relative strength.

Pattern

The overall shape of the field around one or more magnets.

Direction

The force direction on a north pole placed at that point.

Definition mark: include both “region” and “a magnetic pole experiences a force.” “A place with magnetism” is too vague.
Contact trap: a pole does not need to touch the magnet. Magnetic force acts across the field.
Quick Check · What would a tiny north test pole tell you?
The direction of its force gives the local magnetic-field direction.
6
N to S outside

Field direction and compasses

  • Field direction is defined as the direction of force on a north pole.
  • Outside a bar magnet, lines run from north to south.
  • A compass’s north-seeking end follows the tangent to the field line at its position.
  • Lines cannot cross because the resultant field at a point has one direction.
Magnetic field: outside N → S; inside S → NMagnetic field: outside N → S; inside S → NNSField lines form continuous loops; arrows give the force direction on a north pole.
Outside a bar magnet, arrows leave the north pole and enter the south pole.
Magnetic field: outside N → S; inside S → NMagnetic field: outside N → S; inside S → NNSField lines form continuous loops; arrows give the force direction on a north pole.red tip = Nred tip = Nred tip = N
At every point, the plotting compass aligns along the tangent to the nearby field line.
SNNNNNmark north end → movecompass → repeat
Successive north-end marks trace the same direction as the field arrow.
DIRECTION CHECKoutside magnetN → Sat a pointtangent to linecompass endnorth points with fieldcrossing linesnever valid
Use the observation, not the object appearance, to make the magnetic inference.
Interactive · Compass decoder

What must the north end do?

Above the magnet → tangent to the curve, broadly from N towards S.
  1. Find the local field line.
  2. Imagine a short straight tangent touching it at the point.
  3. Follow the field arrow on that tangent.
  4. Put the compass N end in that direction.
MnemonicN END = ARROW FRIEND

The north end of the compass points with the field arrow.

Drawing marks: a correct compass should be tangent, not merely “pointing roughly at the magnet.” Label the north end if asked.
Crossing trap: field lines cannot cross because that would give two field directions at one point.
Quick Check · Which way do arrows point inside the magnet?
The complete field loops back inside from south to north. The assessed external pattern is arrowed north to south.
7
Spacing carries the message

Field strength

  • Closer line spacing represents a stronger field, not faster-moving field.
region Pregion Q
On the same diagram and scale, the more closely spaced region represents the stronger field.
SNSN
Facing unlike poles produce connected, closely spaced lines through the gap.
SNNSweak / neutral region
Facing like poles produce field lines that bow away from the central gap.
Magnetic field: outside N → S; inside S → NMagnetic field: outside N → S; inside S → NNSField lines form continuous loops; arrows give the force direction on a north pole.
The field is normally strongest near a pole where the drawn lines are most concentrated.
Interactive · Strength-by-spacing

Compare two line separations

P has smaller spacing → field at P is stronger.
Facing polesField in gapForce
unlikelines connect N to S; often concentratedattraction
likelines bow away; central oppositionrepulsion
MnemonicCLOSE = STRONG

Judge strength from spacing at the point—not from the artistic total of lines on the page.

Comparison sentence: “The field at P is stronger because the field lines are more closely spaced at P.” Name both the quantity and the evidence.
Line-count trap: a different artist may draw more or fewer total lines. Only relative spacing within a consistent diagram represents strength.
Quick Check · What does a blank central gap between two like poles mean?
The fields oppose there and the surrounding field lines bow away. It does not mean the magnets have no field anywhere.
8
Pattern and direction need different evidence

Plotting a magnetic field

  • Iron filings reveal a pattern but not its arrows; a compass provides direction.
  • Keep interfering magnets and large iron objects away during plotting so the observed field belongs to the intended arrangement.
SNNNNNmark north end → movecompass → repeat
The compass method builds a directed field line from successive local direction marks.
Magnetic field: outside N → S; inside S → NMagnetic field: outside N → S; inside S → NNSField lines form continuous loops; arrows give the force direction on a north pole.LJK
Repeat from several starting points to construct a complete field map.
NS
Filings align into a visible pattern and collect more densely where the field is stronger.
METHOD MATCHcompasspattern + directioniron filingspattern + relativeconcentrationdirection arrowsneed compass / knownpolesreliabilityrepeat · secure magnet
Use the observation, not the object appearance, to make the magnetic inference.
Which method gives the arrow direction?

Plotting compass

Mark north-end direction, move compass, mark again, join smoothly, repeat from many starts.

Iron filings

Place card over magnet, sprinkle lightly, tap gently, observe alignment. Use a compass to add direction.

Method marks: “put compass around magnet” is incomplete. State what is marked, how the compass is moved, and how the marks become a line.
Filings trap: filings show shape and concentration, but do not by themselves label which way an arrow points.
Quick Check · Why tape down the magnet and paper?
If either moves, marks from different compass positions no longer refer to the same field geometry.

Pause · explain it yourself

What does a compass add to an iron-filing pattern?

9
Persistent or controllable?

Permanent magnets and electromagnets

  • A permanent magnet needs no continuous electrical input but is less easily switched.
  • Temporary does not necessarily mean weak; the distinction concerns retention.
  • Magnetic fields interact to produce forces, so physical contact is not needed.
  • A relay links this attraction to mechanical switching in a separate circuit.
compasspermanentcabinet catchpermanentlifting craneswitchable
A compass and catch need persistent fields; a lifting crane needs controlled pickup and release.
low-voltagesupplyswitchmagnetic loadsoft-iron core
A switchable field lets the crane lift magnetic objects and release them at the target.
supplyidentical pins in traysame current · time ·geometry
Core performance needs two checks: lifting while energised and residual holding after switch-off.
NSsteel canmovesiron clipmovesplastic lidno movementcopper stripno movement
Magnetic sorting separates iron or steel objects from non-magnetic materials.
Which job most clearly needs an electromagnet?
NeedChoiceWhy
field without powerpermanent magnetretains magnetism
lift, release or remote controlelectromagnetfield can be switched
clean release coresoft ironlow retention
MnemonicPERMANENT = PRESENT · ELECTRO = CONTROL

Ask whether the field must stay or obey a switch.

Application answers: name the device, state what the magnet does, then link the correct material or switching property.
Scope control: for this topic, focus on why an electromagnet is useful. Detailed current-field rules belong to later electricity and magnetism work.
Quick Check · Why can steel cause a release fault in a lifting core?
Steel retains magnetism, so the load may remain weakly attracted after the current is switched off.
10
Alternative to Practical

ATP Lab Lens · Design magnetic investigations around fixed geometry, repeated readings and clear evidence

SNNNNNmark north end → movecompass → repeatsecure magnet · fine marks ·repeat
A high-quality field map depends on fixed magnet position and careful compass marking.
force sensorforce / Ntest specimenNfixed separation
A force sensor turns a subjective movement into a quantitative measurement.
supplyidentical pins in traycontrol current · turns ·time · core size
A fair core comparison changes only the core material.
time after removalclips liftedrod Arod Brepeat each time · calculatemean
A time graph can compare how quickly magnetism is lost.
Variables

State the changed quantity, measured outcome and every factor that affects field geometry or coil strength.

Processing

Use repeats and means. For a core, compare “on” lifting with “off” retention.

Evaluation

Name a specific limitation and attach an improvement that directly reduces it.

InvestigationIndependentDependentKey controls
field mapposition / pole arrangementcompass directionmagnet position, compass, grid, surroundings
core testcore materialload on and remaining offcurrent, turns, core size, time, geometry
retentionmaterial or timeforce / clips liftedmagnetising field and test separation
Linked evaluation: “The compass is wide, so the position is uncertain; use a smaller compass and fine pencil marks.” Limitation plus mechanism plus improvement earns stronger credit.
Safe practical: use low-voltage, current-limited supplies; switch off before rearranging; avoid hot coils; contain pins in a tray; keep fingers clear when magnets attract; keep small magnets away from the mouth and sensitive devices.
Quick Check · Why record both on-load and off-load?
A good temporary core must produce a useful magnetic effect when energised and lose most of it for clean release after switch-off.
11
One-page examiner logic

Master Magnetism by separating proof, poles, field and purpose

MAGNETIC TEST RECORDtest poleunknown endobservationattractionambiguouscould be inductionrepulsiondecisiveboth magnetisedno responseclassificationnon-magnetic
Evidence hierarchy: repulsion is the decisive magnet test.
NSNattraction
Induction: nearest pole is opposite, so attraction follows.
Magnetic field: outside N → S; inside S → NMagnetic field: outside N → S; inside S → NNSField lines form continuous loops; arrows give the force direction on a north pole.
Field direction: north to south outside; compass north end follows the tangent.
compasspermanentcabinet catchpermanentlifting craneswitchable
Application choice: persistent permanent magnet or controllable electromagnet.

1 · Prove

Repulsion proves magnetisation. Attraction may be induced.

2 · Predict

Near induced pole is opposite; far induced pole is the other.

3 · Read

Arrows N to S outside; tangent gives local direction; close lines mean strong.

4 · Choose

Soft iron for switchable cores; steel for lasting magnets.

same repel · unlike attract   |   external field N → S   |   closer spacing → stronger field
Final chainFACE · FORCE · PROOF · INDUCE · TRACE · CHOOSE

Face the poles, follow the force, demand proof, induce the opposite near pole, trace the field, choose the right magnet type.

Final check · A rod attracts both poles and keeps pins after the magnet is removed. What can you say?
It is a magnetic material and shows retention, so steel is plausible; however attraction alone still does not prove its original pole identity. Use a repulsion test for proof.
Interactive mastery: 0 / 8 explored

Explore all eight checkpoints, then use the independent Practice and Exam Arena banks.