Skip to lesson
1
PHYSICS CREST — Global Physics Academy
Reach the Peak of Understanding.

Unit 9 · Thermodynamics

AP Physics 2 · Algebra-Based · PHYSICS CREST

The unit in one sentence: connect microscopic particle behavior to macroscopic pressure, temperature and energy — then use representations, conservation laws and experimental evidence to predict how systems change.

Current AP focus
Unit 9 is 15–18% of the multiple-choice section. AP Physics 2 also uses four course-wide FRQ routines: Mathematical Routines (MR), Translation Between Representations (TBR), Experimental Design and Analysis (EDA), and Qualitative/Quantitative Translation (QQT). Unit 9 can appear inside any of those routines.
Exact Unit 9 boundary
9.1 Kinetic Theory9.2 Ideal Gas Law9.3 Thermal Transfer & Equilibrium9.4 First Law9.5 Specific Heat & Conductivity9.6 Entropy / Second Law

This page deliberately excludes non-required calculations such as Carnot efficiency, numerical entropy formulas, latent heat, Stefan–Boltzmann radiation, logarithmic gas work and calculus-based work integrals.

9.1 · Kinetic Theory of Temperature and Pressure

  • Thermodynamics accounts for energy transfer, state changes and statistical particle behaviour.
  • Temperature relates to average molecular kinetic energy in the ideal-gas model; internal energy is a system property.
Ideal-gas microscopic model
  • Particles have random instantaneous velocities.
  • Particle volume is negligible compared with the gas volume.
  • Collisions are elastic.
  • Only collision forces are appreciable in the ideal-gas model.
Ideal gas particles and stated container conditionsrandom particle motionfixed-wall impulsesforce per areapressure throughout gas
AP reasoning chain
Higher temperature → greater average particle kinetic energy → larger typical speeds → stronger/more frequent wall-collision momentum transfer → pressure can increase if volume and particle number are fixed. Do not say merely “hotter means more pressure”; identify what is held constant and explain the collision mechanism.
$P=\dfrac{F_\perp}{A}$
9.1 collision toolkit · momentum is the bridge to pressure

For an atom–atom collision, conserve momentum component by component:

$\sum p_{x,i}=\sum p_{x,f}\qquad \sum p_{y,i}=\sum p_{y,f}$

For an ideal elastic collision with a fixed wall, the velocity component parallel to the wall is unchanged while the perpendicular component reverses. If the incoming perpendicular speed is $v_\perp$, then the particle's perpendicular momentum changes by magnitude

$|\Delta p_\perp|=2m|v_\perp|$

The wall receives an equal-and-opposite impulse. Repeated impulses per unit time produce an average force; dividing the perpendicular force by area gives pressure. For a two-dimensional atom–atom collision, draw axes first and conserve $p_x$ and $p_y$ separately.

Collision exam technique
Do not invent a separate “gas force” during a collision. Identify the colliding objects, choose the system, resolve momenta into components when needed, apply momentum conservation, then connect impulse $\Delta p$ to force and pressure.
Common mistake
Pressure is not something that exists only “at the wall.” A gas has pressure throughout its volume; the wall is where that pressure can be measured as force per area.
2

Temperature, RMS Speed & Distributions

Temperature is statistical

Average kinetic energy per particle
$K_{\rm avg}=\dfrac32 k_B T=\dfrac12 m v_{\rm rms}^2$

For an ideal gas, absolute temperature characterizes the average translational kinetic energy of the particles. It does not tell you the kinetic energy of one particular particle.

Same temperature

Different gases at the same $T$ have the same $K_{\rm avg}$ per particle.

Different masses

At the same $T$, lighter particles have the greater $v_{\rm rms}$ because the same average kinetic energy is carried by less mass.

$v_{\rm rms}=\sqrt{\dfrac{3k_BT}{m}}$
Useful derived form — not a new formula to memorize
Combining $PV=Nk_BT$ with $\tfrac12mv_{\rm rms}^2=\tfrac32k_BT$ gives $$v_{\rm rms}=\sqrt{\dfrac{3PV}{Nm}}.$$ This is exactly the kind of symbolic connection AP may ask you to construct.

Maxwell–Boltzmann representation

Boundary
You do not need the functional form of the Maxwell–Boltzmann distribution. You do need to interpret how its shape changes with temperature.
Normalized speed distributionsspeed (same scale)probability per unit speedlower Thigher T
Absolute zero
Within the classical ideal-gas model, $K_{\rm avg}\to0$ as $T\to0\,\text{K}$. AP Unit 9 does not require a quantum treatment of zero-point motion.
Quick Check 1
Gas A and Gas B are at the same temperature. A particle of A has one-fourth the mass of a particle of B. Compare (i) average kinetic energy and (ii) r.m.s. speed.
Their average kinetic energies are equal. Since $v_{\rm rms}\propto1/\sqrt m$, $v_A/v_B=\sqrt{m_B/m_A}=2$.
3

The Ideal Gas Law & Graph Intelligence

9.2 · The Ideal Gas Law

Formal ideal-gas assumptions
Instantaneous particle velocities are random; particle volumes are negligible compared with the gas volume; collisions are elastic; and appreciable interparticle forces occur only during collisions. These assumptions are the model behind the equations and graphs below.
$PV=nRT=Nk_BT$
Molar form
$PV=nRT$ uses amount $n$ in moles.
Particle form
$PV=Nk_BT$ uses the number of particles $N$.
Unit discipline
With SI $R$, use pressure in Pa, volume in m³ and absolute temperature in K. Always identify which variables are actually constant before using a proportionality.

The gas law uses absolute pressure: $P_{abs}=P_{gauge}+P_{atm}$. Use $T_K=T_C+273.15$. Temperature differences in kelvin and Celsius have the same numerical size.

Three graph families

$P$ vs $T$ at fixed $V,N$

Straight line through the origin when $T$ is in kelvin. $P\propto T$.

$V$ vs $T$ at fixed $P,N$

Straight line through the origin in kelvin. $V\propto T$.

$P$ vs $V$ at fixed $T,N$

Inverse curve. $PV=$ constant.

Graph: P versus T (K)T (K)PGraph: V versus T (K)T (K)VGraph: P versus VVP

Absolute-zero extrapolation

At fixed volume and particle number, $P\propto T_K$. If pressure is plotted against Celsius temperature, extending the straight best-fit line to $P=0$ gives an intercept near −273.15 °C — the experimental idea behind absolute zero.

Absolute-pressure Celsius graph with extrapolated temperature intercept−273°C0°Ctemperature (°C)absolute Pmeasured dataextrapolation

Linearization

At constant $T$ and fixed amount, $P=nRT\,(1/V)$. Therefore plotting $P$ against $1/V$ should give a straight line with slope $nRT$. That slope can be used to determine $n$.

Quick Check 2
A fixed amount of gas is at constant temperature. What should you plot to make an inverse $P$–$V$ relationship linear, and what does the slope mean?
Plot $P$ vertically against $1/V$ horizontally. Since $P=(nRT)(1/V)$, the slope is $nRT$.
4

From Gas Pressure to Forces

Pistons, lids & moving boundaries

AP frequently embeds thermodynamics inside a mechanics representation. The pressure equation becomes a force equation through $F=PA$.

Gas cylinder and piston with stated constraintsgas samplepiston mass Marea AoutsidePₐₜₘPiston free-body diagram; vertical pressure and weight forcesPgas APatm AMgPgas A = Patm A + Mg at rest
Equilibrium pressure
For a horizontal frictionless piston at rest, $$P_{gas}A=P_{atm}A+Mg\quad\Rightarrow\quad P_{gas}=P_{atm}+\frac{Mg}{A}.$$ If the piston moves slowly while $M$, $A$ and atmospheric pressure stay unchanged, the gas pressure stays approximately constant: an isobaric process.
Lift-off threshold
A loose lid begins to accelerate upward when the gas-pressure force becomes greater than the downward atmospheric-pressure force plus the lid's weight. At the threshold, equality gives the minimum pressure; combine that with $PV=Nk_BT$ to derive the threshold temperature.

Graph-switching routine

Physical statement$P$–$V$ pictureWhat the ideal-gas law adds
movable weighted piston, slow heatinghorizontal right$P$ fixed → $V\propto T$
piston pinned, heating continuesvertical up$V$ fixed → $P\propto T$
rigid sealed tank coolingvertical down$V,N$ fixed → $P/T=$ constant
AP trap
Do not automatically set $P_{gas}=P_{atm}$ for a massive piston or lid. If it has weight, that weight contributes to the required gas pressure.
Quick Check 3
A piston of mass $M$ and area $A$ is at rest under atmospheric pressure. Write the equilibrium gas pressure. Then state the path on a $P$–$V$ diagram when the gas is heated slowly and the piston rises.
$P_{gas}=P_{atm}+Mg/A$. With the external load unchanged and motion slow, $P$ is approximately constant, so the path is horizontal to the right.
5

Thermal Transfer & Equilibrium

9.3 · Thermal Energy Transfer and Equilibrium

Language that matters
Heating is energy transferred into a system by thermal processes. Cooling is energy transferred out of a system by thermal processes. “Heat” is not a substance stored inside an object.

Conduction

Microscopic interactions transfer energy through matter. Thermal conductivity describes how readily this occurs.

Convection

Bulk motion of a fluid transports energy from one region to another.

Radiation

Electromagnetic radiation transfers energy and does not require matter between source and receiver.

Two samples in thermal contacthigher Tnet energy →lower Tthermal contactThree mechanisms of thermal energy transferconductionsolid interactionsconvectionbulk fluid motionradiationacross vacuum
Temperature decides direction, not size or total internal energy
Two objects at the same temperature have no net thermal energy transfer when first brought into contact, even if their masses, volumes or total internal energies differ.
Thermal equilibrium
When systems in thermal contact reach the same temperature, there is no net energy transfer between them by thermal processes. The microscopic collisions continue; the net transfer is zero.
Common mistake
“The larger object must heat the smaller object” is false. Net thermal transfer is governed by temperature difference, not by which object contains more matter.
Quick Check 4
A small copper block and a large aluminum block are both at $295\,\text{K}$. They touch. Which direction is the net energy transfer?
Neither direction. They are already at the same temperature, so there is no net thermal energy transfer.
6

Internal Energy & the First Law

9.4 · The First Law of Thermodynamics

  • Use kelvin in ideal-gas relations.
  • Write a work convention before the first law: ΔU = Q − W_by is equivalent to Q + W_on.
  • A p–V diagram’s area gives work by the gas for the stated quasi-static process.
Internal energy
Internal energy is the total microscopic kinetic energy of the objects that make up a system plus potential energy associated with their internal configuration. For an ideal monatomic gas, interparticle potential energy and internal structure are ignored, so $$U=\dfrac32 nRT=\dfrac32 Nk_BT.$$ Therefore $U$ depends only on temperature for a fixed amount of monatomic ideal gas.
State function
$U$ depends on the state, not the path used to reach it. If two different processes connect the same initial and final states, $\Delta U$ is the same even though $Q$ and $W$ can differ.

The AP sign convention

$\Delta U=Q+W$
TermPositiveNegative
$Q$energy transferred into the system by heatingenergy transferred out by cooling
$W$work done on the systemsystem does work on surroundings
$\Delta U$internal energy increasesinternal energy decreases
Signed energy transfers across the system boundarySYSTEMQ > 0: heating inW > 0: work onΔU = Q + W; W is work ON system
Worked sign audit
A gas has $720\,\text{J}$ of work done on it while $260\,\text{J}$ leaves by cooling. Then $W=+720\,\text{J}$ and $Q=-260\,\text{J}$. $$\Delta U=-260+720=+460\,\text{J}.$$ Internal energy increases.
  1. Circle the system.
  2. Translate each energy transfer into a sign before substituting.
  3. Use $\Delta U=Q+W$.
  4. Interpret the sign in words.
Quick Check 5
A gas receives $900\,\text{J}$ by heating and does $340\,\text{J}$ of work on its surroundings. Find $\Delta U$.
$Q=+900\,\text{J}$ and $W=-340\,\text{J}$, so $\Delta U=+560\,\text{J}$.
Your turn · A gas absorbs 900 J and does 350 J of work. Find its internal-energy change.

Decimals, scientific notation and compatible units are accepted. Keep any required sign.

7

P–V Diagrams & Thermodynamic Processes

Work from a graph

Work from a moving boundary
For constant external pressure, $$W=-P_{ext}\Delta V.$$ For variable pressure, the average must be averaged over the volume change. A quasistatic process has gas pressure approximately equal to the resisting external pressure, so the area under its equilibrium gas-pressure path gives the work magnitude. Expansion against positive resistance gives $W<0$; compression gives $W>0$.
General graph meaning
For a quasistatic process on a pressure–volume graph, the magnitude of the work associated with expansion or compression is the geometric area under the path. For a closed cycle, the magnitude of net work is the area enclosed by the loop. You do not need a calculus formula in AP Physics 2.

A clockwise cycle has $W_{on}<0$ and net $Q>0$; reverse the loop and both signs reverse. Free expansion into vacuum has no resisting pressure, so $W=0$ even when gas volume increases. Do not draw a quasistatic pressure path through its nonequilibrium intermediate states.

Graph: P / P₀ versus V / V₀V / V₀P / P₀012341234ABC

Four special processes

ProcessWhat is fixed?$W$$\Delta U$ for monatomic ideal gasFast reasoning
isovolumetric / isochoric$V$$0$follows $\Delta T$vertical on $P$–$V$
isobaric$P$$-P\Delta V$follows $\Delta T$horizontal on $P$–$V$
isothermal$T$sign from expansion/compression$0$$PV=$ constant for fixed $n$
adiabatic$Q=0$$\Delta U=W$follows $W$no energy transfer by heating/cooling
Isothermal compression
$\Delta U=0$. Compression means $W>0$, so $Q=-W<0$: energy must leave through cooling to keep temperature unchanged.
Adiabatic expansion
$Q=0$. Expansion means $W<0$, so $\Delta U<0$ and the gas temperature decreases.
Cycle trap
A closed cycle returns to the initial state, so $\Delta U_{cycle}=0$. That does not mean $Q_{net}=0$ or $W_{net}=0$. Instead $Q_{net}=-W_{net}$.
Quick Check 6
A monatomic ideal gas expands isothermally. State the signs of $\Delta U$, $W$ and $Q$ using AP's convention.
$\Delta U=0$ because temperature is constant. Expansion gives $W<0$. Therefore $Q=-W>0$.
An ideal gas expands isothermally. Which statement is correct?

8

Specific Heat, Calorimetry & Conductivity

9.5 · Specific Heat and Thermal Conductivity

$Q=mc\Delta T$

Specific heat $c$ is an intrinsic material property. In AP Physics 2 it is modeled as independent of temperature.

Mass

For fixed $Q,c$, $\Delta T\propto1/m$.

Specific heat

For fixed $Q,m$, $\Delta T\propto1/c$.

Energy input

For fixed $m,c$, $\Delta T\propto Q$.

Density link
If a sample has volume $V$ and density $\rho$, then $m=\rho V$. Substitution gives $$Q=\rho Vc\Delta T\quad\Rightarrow\quad \rho=\frac{Q}{Vc\Delta T}.$$ AP often expects this kind of multi-equation construction.

Calorimetry-style energy balance

In a well-insulated mixing experiment, energy lost by the warmer object is approximately energy gained by the cooler object. A robust sign method is to use $Q_i=m_ic_i(T_f-T_i)$ for every object and set the total transfer sum to zero for the isolated collection.

Experimental uncertainty
Useful controls include insulation, rapid transfer of the hot sample, stirring for a uniform temperature, waiting for a stable equilibrium reading, measuring masses carefully, and repeating trials. A good AP response explains how each step reduces a named uncertainty.

Thermal conductivity

$\dfrac{\Delta Q}{\Delta t}=\dfrac{kA\Delta T}{L}$
One-dimensional conduction through a samplesamplehot face Tₕcold face Tcthickness Lface area A
Factor-change technique
From $\dot Q\propto kA\Delta T/L$: double $A$ → rate ×2; halve $L$ → rate ×2; triple $\Delta T$ → rate ×3. Combined: ×12.
Quick Check 7
A wall is replaced by a material with twice the conductivity, twice the area and half the thickness, while $\Delta T$ is unchanged. By what factor does the conduction rate change?
Factor $2\times2\times2=8$.
Conduction conditions
Use $H=kA\Delta T/L$ for steady, one-dimensional conduction with negligible side losses. L is measured along the energy-transfer direction, A is perpendicular to it, and ΔT is the maintained difference between the two faces. Specific heat controls temperature change; conductivity controls transfer rate. Neither property alone determines the other.
Constant-power heating apparatus for a solidheaterT probeknown Pₕmass mrecord T(t)insulation; uniform sample temperature
9

Entropy & the Second Law

9.6 · Entropy and the Second Law of Thermodynamics

Boundary statement
AP Physics 2 requires a qualitative treatment of the second law. Do not turn Unit 9 entropy into numerical $\Delta S$ calculations.
AP description of entropy
Entropy can be described qualitatively as the tendency of energy to spread or as the unavailability of some of a system's energy to do work. Localized energy tends to disperse.
State function + equilibrium
Entropy is a state function: it depends on the current state/configuration, not the route used to reach it. For an isolated collection under fixed constraints, maximum entropy occurs at thermodynamic equilibrium.
Two samples in thermal contactinitial: warmerenergy localizedinitial: coolerenergy localizedinsulated enclosureTwo samples in thermal contactfinal: Tfequal Tfinal: Tfequal Tinsulated enclosure
Second law · use the AP system boundary carefully
The total entropy of an isolated system cannot decrease: it increases in an irreversible process and stays constant in an ideal reversible process. An isolated system exchanges neither matter nor energy with its surroundings. A closed system exchanges no matter but may exchange energy, so its own entropy can decrease when it transfers energy out. Include the surroundings when assessing the total entropy change. Identify the system boundary before making a prediction.
How AP tests entropy
Expect ranking/claim questions: Will a thermally isolated set of objects move toward a common temperature? Does an insulated gas spreading into a larger accessible region move toward a more probable equilibrium state? Which state has maximum entropy? Your explanation should use energy spreading and equilibrium, not a memorized numerical entropy equation.
Common mistake
“Entropy means disorder” is too vague for a high-quality AP justification. Prefer: energy becomes more spread out; the system moves toward thermodynamic equilibrium; equilibrium corresponds to maximum entropy.
Quick Check 8
Three identical blocks at different temperatures are placed together inside a thermally isolated box. What happens to the total entropy as they approach a common temperature?
It increases until thermodynamic equilibrium is reached. Energy spreads from higher-temperature regions to lower-temperature regions, and equilibrium corresponds to maximum entropy.
10

AP Exam Intelligence · Unit 9

The recurring reasoning routes

Evidence patternWhat you must doTechnique
Maxwell–Boltzmann graphchoose/justify changed distributionhigher T → broader, lower, shifted right
piston or lidFBD + pressure + gas lawconvert pressure to force with $F=PA$
PV process/cycletranslate path, work, $\Delta U$, $Q$sign ledger + geometric area
specific-heat labdesign, uncertainty, graph/slopeidentify measurable variables and linear relationship
ideal-gas lablinearize data$P$ vs $1/V$ at fixed $T$ → slope $nRT$
entropy/equilibriummake a qualitative claimenergy spreading → maximum entropy at equilibrium

Four FRQ routines

MR · Mathematical Routines

Derive or calculate from fundamental relationships; explain why the expression is physically consistent.

TBR · Translation Between Representations

Move between words, particle pictures, equations and graphs; explain consistency between representations.

EDA · Experimental Design & Analysis

Design reproducible procedures, reduce uncertainty, choose axes, create linear graphs and use slopes.

QQT · Qualitative/Quantitative Translation

Make a physics claim without equations, then derive mathematics and connect the two.

Master equation sheet — equations provided on the AP reference sheet

Pressure$P=F_\perp/A$
Particle KE / RMS$K_{avg}=\tfrac32k_BT=\tfrac12mv_{rms}^2$
Ideal gas$PV=nRT=Nk_BT$
Monatomic ideal-gas internal energy$U=\tfrac32nRT=\tfrac32Nk_BT$
Work on system$W=-P\Delta V$ for constant/average external pressure
First law$\Delta U=Q+W$
Specific heat$Q=mc\Delta T$
Thermal conduction$\Delta Q/\Delta t=kA\Delta T/L$

Do not waste revision time memorizing what the reference sheet supplies. Train the harder skill: selecting the right relationship, understanding its conditions, rearranging symbolically, connecting it to graphs/diagrams, and explaining the physics.

High-frequency traps
  • Celsius used in gas laws
  • same temperature confused with same speed
  • massive piston treated as $P_{gas}=P_{atm}$
  • work-by and work-on signs mixed
  • cycle $\Delta U=0$ incorrectly taken to mean no heat/work
  • entropy turned into out-of-scope calculations
Final 20-second check
  1. Did I identify the system?
  2. Did I state what is constant?
  3. Are temperatures in kelvin where absolute T is required?
  4. Did I assign signs before using the first law?
  5. Does my graph match the physical change?
  6. Did I justify the claim with a principle, not a slogan?
Quick Check 9 · Teach it
Without looking above, explain why a rigid sealed gas container develops greater pressure when heated, using both the particle model and the ideal-gas law.
Particle model: higher T means greater average kinetic energy and typical speed, so collisions transfer greater momentum to the walls, increasing average force per area. Mathematical model: with fixed $N,V$, $P=Nk_BT/V$, so $P\propto T$.
Connections between representationsparticle modelwall impulse → forceKavg ↔ temperatureenergy modelgas law → statefirst law → transfers

Scope authority: uploaded College Board AP Physics 2 Course and Exam Description, Unit 9 topics 9.1–9.6. Questions on the companion pages are PHYSICS CREST training items.