PHYSICS CREST — Global Physics Academy Reach the Peak of Understanding.
1
Unit 13 · Overview
Ray Model & Reflection
Current AP boundary
Unit 13 has exactly four official topics: 13.1 Reflection · 13.2 Images Formed by Mirrors · 13.3 Refraction · 13.4 Images Formed by Lenses. Wave interference/diffraction belongs to Unit 14.
Light as a ray
Geometric optics follows rays to predict image positions.
A real image is located where actual outgoing rays meet; a virtual image is located where their backward extensions meet.
A useful drawing must match the equation’s sign convention.
A light ray is a straight line perpendicular to a wavefront and points in the direction the light travels.
Ray diagrams are powerful when wave spreading can be neglected.
A narrow coherent, monochromatic laser beam is a common source that can be modeled as a ray in Unit 13; interference and diffraction require the wave model in Unit 14.
Law of reflection
$\boxed{\theta_i=\theta_r}$
Angle trap
Both angles are measured from the normal, never from the surface. If an angle is given from the surface, subtract it from $90^\circ$.
Specular
Smooth surface → nearly common normal → reflected rays remain orderly.
Diffuse
Rough surface → varying local normals → reflected rays leave in many directions, even though $\theta_i=\theta_r$ locally.
Quick Check 1
A ray makes $18^\circ$ with a mirror surface. What is $\theta_i$?
$72^\circ$.
2
Topic 13.1
Plane Mirrors & Multi-Reflection
Plane-mirror image
Virtual: reflected rays diverge but appear to come from behind the mirror.
Upright and same size.
Image distance magnitude equals object distance.
Better language than “left-right reversal”
A plane mirror reverses the front-back coordinate normal to the mirror. Apparent left-right reversal depends on how we compare ourselves with the image.
Reachability / finite-mirror technique
Replace the object point by its virtual image the same distance behind the mirror.
Draw straight lines from that virtual image through the ends of the finite mirror.
Extend those reflected-ray boundaries into the region of interest. Only front-of-mirror points between the reflected boundary rays can receive this reflected light.
Multiple mirrors
At each reflection, forget the previous normal and draw the new local normal. Apply $\theta_i=\theta_r$ again. For two perpendicular mirrors, two reflections reverse both planar direction components, so the final ray is antiparallel to the initial ray.
Exam trap
Never carry one incidence angle unchanged from one mirror to another unless the geometry proves it.
Quick Check 2
An object is 0.40 m in front of a plane mirror. Can a screen behind the mirror capture that virtual image?
No. Its apparent location is 0.40 m behind the mirror, but actual reflected rays travel in front. Dashed extensions are construction lines and deliver no projected image.
3
Topic 13.2
Spherical Mirrors & Principal Rays
Geometry
For a spherical mirror, the center of curvature $C$ is at radius $R$ from the surface and the focal point is approximately halfway: $f=R/2$ in the paraxial model. A plane mirror is the limiting case with its focal point an infinite distance from the mirror.
Concave mirror
Converging, $f>0$. Parallel rays reflect toward the focal point.
Convex mirror
Diverging, $f<0$. Parallel rays reflect as if they originated from a focal point behind the mirror.
Principal rays — use the AP set
Parallel to the principal axis → reflects through $F$ for a concave mirror, or as if from $F$ for a convex mirror.
Toward/through $F$ → reflects parallel to the principal axis.
At the mirror’s vertex (where the principal axis meets the mirror) → reflect it using the law of reflection about the principal axis, which is the local normal there.
Useful extra construction
A ray aimed through the center of curvature $C$ strikes the spherical surface normally and retraces its path. It is useful for checking a diagram, although the current CED states the vertex ray in its typical three-ray set.
Real vs virtual test
If actual reflected rays intersect, the image is real. If only their backward extensions intersect, the image is virtual.
Paraxial model
The spherical-mirror relationships and constructions assume small ray angles near the principal axis. The drawings use the vertex reference plane for this approximation. A plane mirror has infinite focal distance and a virtual image at sᵢ = −sₒ.
Quick Check 3
Why does a ray directed through the center of curvature retrace its path?
A radius is normal to the spherical surface. Zero incidence relative to that local normal produces reflection back along the same line.
4
Topic 13.2
Mirror Equation, Signs & Magnification
Mirror equation
$\boxed{\dfrac1f=\dfrac1{s_o}+\dfrac1{s_i}}$
Signed magnification
$\boxed{M=\dfrac{h_i}{h_o}=-\dfrac{s_i}{s_o}}$
Quantity
Positive
Negative
$f$
converging/concave
diverging/convex
$s_i$
real image
virtual image
$M$
upright
inverted
Worked example
A concave mirror has $f=12\,\mathrm{cm}$ and $s_o=36\,\mathrm{cm}$. Then $1/s_i=1/12-1/36=1/18$, so $s_i=18\,\mathrm{cm}$ and $M=-18/36=-0.50$: real, inverted, half-size.
Sign logic
Do not decide real/virtual from a memorized picture first and then force the algebra to match. Use a consistent convention and interpret the sign you obtain.
Define the sign convention
All objects here are real: $s_o>0$. For mirrors, $s_i>0$ is in front on the reflecting side; $s_i<0$ is behind. For lenses with light traveling left to right, $s_i>0$ is on the transmitted side; $s_i<0$ is on the object side. Take the upright object height positive, so $M=h_i/h_o$ is negative for an inverted image. Measure mirror distances from the vertex and lens distances from the midline.
Quick Check 4
A mirror has sₒ = +0.40 m and sᵢ = −0.10 m. Find M and classify the image.
M = −sᵢ/sₒ = +0.25: virtual, upright and reduced.
5
Topic 13.2
Mirror Regimes & Functional Reasoning
Concave-mirror object position
Image
$s_o>2f$
between $f$ and $2f$; real, inverted, reduced
$s_o=2f$
at $2f$; real, inverted, same size
$f < s_o < 2f$
beyond $2f$; real, inverted, enlarged
$s_o=f$
image at infinity; reflected rays parallel
$s_o < f$
behind mirror; virtual, upright, enlarged
Equation-to-claim technique
$s_i=\dfrac{f s_o}{s_o-f}$
For fixed $f>0$ and $s_o>f$, moving the object closer to $f$ makes the denominator smaller, so the real image moves farther away and magnification grows. This is the algebraic version of the ray-diagram story.
Quick Check 5
A concave mirror forms a same-size real image. Where is the object?
At $2f$, the center of curvature in the paraxial model.
6
Topic 13.3
Refraction, Index & Snell’s Law
Why light bends
Refraction is a change in direction caused by a change in light speed when it enters a new medium.
$\boxed{n=\dfrac{c}{v}}$
$\boxed{n_1\sin\theta_1=n_2\sin\theta_2}$
Higher $n$
Lower speed. Entering higher $n$ from lower $n$ bends the ray toward the normal.
Lower $n$
Higher speed. Entering lower $n$ from higher $n$ bends the ray away from the normal.
Normal-incidence exception
At $\theta_1=0$, the speed can change but the ray does not change direction.
Angle-from-surface trap
If a problem says the refracted ray is $57^\circ$ from the surface, use $33^\circ$ from the normal in Snell’s law.
Quick Check 6
Does zero bending at normal incidence prove equal refractive indices?
No. Both normal angles are zero in Snell’s law even when the speed and index change.
7
Topic 13.3
Critical Angle & Total Internal Reflection
Two conditions
Light must travel from higher $n$ to lower $n$.
Incidence angle must exceed the critical angle.
At the critical angle, the refracted ray is at $90^\circ$ and travels along the boundary.
$\boxed{\theta_c=\sin^{-1}\left(\dfrac{n_2}{n_1}\right)}$ for $n_1>n_2$
Graph meaning
For higher-$n$ material to air, $\sin\theta_r=(n_1/n_2)\sin\theta_i$ only while a transmitted ray exists. The graph reaches $\sin\theta_r=1$ at the critical point; beyond it, no refracted ray exists.
Quick Check 7
Glass $n=1.60$ to air. Find $\theta_c$.
$\sin\theta_c=1/1.60=0.625$, so $\theta_c\approx38.7^\circ$.
Critical does not mean beyond critical
At θᵢ = θc the ideal transmitted ray grazes the boundary at 90°. TIR requires θᵢ > θc and incidence from higher index toward lower index. Angles below the threshold may have both transmitted and reflected light; drawing the transmitted ray alone does not assert that all energy is transmitted.
8
Topic 13.3
Refraction Experiments & Linearization
Determine refractive index with a laser
Trace the block and normal on paper.
Send a narrow laser ray through at several incidence angles.
Mark paths and measure $\theta_i,\theta_r$ from the normal.
Calculate the sines.
$n_{air}\sin\theta_i=n_B\sin\theta_r$
With $n_{air}\approx1$, plotting $\sin\theta_i$ vertically against $\sin\theta_r$ horizontally gives slope $n_B$.
Uncertainty controls
Use a broad angle range, thin ray marks, repeated trials, careful normal construction, and a best-fit line. Do not base $n$ on one pair of angles.
Why this matters on AP
Unit 13 explicitly emphasizes experimental procedures, graphing, linearization, and using best-fit features to make claims.
Measure the internal ray
For a rectangular block, mark entry and exit points and join them to reconstruct the internal path. Measure its angle against the entry-face normal. The emergent angle outside a parallel second face is not the internal refracted angle. Vary one incidence angle at a time, keep the wavelength fixed, and fit a free intercept to check systematic offsets.
Quick Check 8
If the graph uses sin θᵣ vertically versus sin θᵢ horizontally for air to block, what does slope mean?
It is approximately 1/nblock. Reversing the usual axes reverses the slope interpretation; it does not invalidate the data.
9
Topic 13.4
Thin Lenses & Principal Rays
Converging lens
A thin convex lens refracts parallel rays toward the transmitted-side focal point. It has $f>0$.
Diverging lens
A thin concave lens refracts parallel rays so they diverge as if from a focal point on the incident side. It has $f<0$.
Principal rays
Parallel ray → through far $F$ (converging) or as if from near $F$ (diverging).
Center ray → approximately straight through an ideal thin lens.
Focus ray: for a converging lens, a ray through the incident-side F emerges parallel; for a diverging lens, a ray aimed toward the transmitted-side F emerges parallel.
For a diverging lens, which focal point does the focus ray aim toward before refraction?
Toward the focal point on the transmitted side. It then emerges parallel. The parallel incident ray instead diverges as if from the incident-side focal point.
10
Topic 13.4
Lens Equation, Magnification & Regimes
$\boxed{\dfrac1f=\dfrac1{s_o}+\dfrac1{s_i}}$
$\boxed{M=\dfrac{h_i}{h_o}=-\dfrac{s_i}{s_o}}$
Converging-lens regimes
For a converging lens with a real object, use the stated convention consistently in 1/f = 1/do + 1/di.
Magnification m = −di/do tells image orientation as well as size.
At refraction boundaries, measure angles from the normal.
Object
Image
beyond $2f$
between $f$ and $2f$, real, inverted, reduced
at $2f$
at $2f$, real, inverted, same size
between $f$ and $2f$
beyond $2f$, real, inverted, enlarged
at $f$
at infinity
inside $f$
same side as object, virtual, upright, enlarged
Diverging lens
For a normal real object, a diverging lens gives a virtual, upright, reduced image between the lens and its near focal point.
Fast symbolic check
For a converging lens with $s_o=1.5f$, $s_i=3f$ and $|M|=2$. At $s_o=2f$, $s_i=2f$ and $|M|=1$.
A finite image is absent at the focus
For a finite off-axis object point in the front focal plane, the outgoing rays are parallel to each other, but can be tilted relative to the principal axis. There is no finite sharp image to catch by moving a screen. Classification of a finite real or virtual image applies on either side of this limiting placement.
Quick Check 10
Can rays from two different object points crossing alone define one focused image point?
No. A focused image point requires rays from the same object point to meet, or their backward extensions to meet for a virtual image.
11
Topic 13.4
Lens Experiments & Changing Lens Strength
Focal length from a graph
Measure several real-image pairs $(s_o,s_i)$ with an object, lens, and screen.
$\dfrac1{s_i}=\dfrac1f-\dfrac1{s_o}$
Plot $1/s_i$ vertically versus $1/s_o$ horizontally:
slope $=-1$
vertical intercept $=1/f$
therefore $f=1/(\text{intercept})$
Experimental trap
Measure distances from the lens reference/midline consistently and use best-fit data rather than forcing every point onto the model.
Same shape, larger refractive index
Snell’s law supports qualitative reasoning that a higher-index lens of the same shape in the same surrounding medium bends light more strongly. For two thin convex lenses with identical geometry in air, using one wavelength and material indices greater than air, the higher-$n$ lens has a shorter focal length. At the same real-object distance (remaining in the real-image regime), a smaller $f$ generally gives a smaller positive $s_i$.
Quick Check 11
On a $1/s_i$ vs $1/s_o$ graph, Lens B has a larger positive intercept. Which lens has shorter focal length?
Lens B, because intercept $=1/f$.
Keep model conditions fixed
Use the same thin lens, surrounding medium, wavelength and alignment when collecting a focal-length graph. Repeat focus judgments, measure from the midline and label reciprocal-distance units. The intercept has units of inverse length: taking its reciprocal gives f in the corresponding length unit.