PHYSICS CREST — Global Physics Academy Reach the Peak of Understanding.
1
AP Physics 2 · Unit 11
Electric Circuits
Unit 11 at a glance
Eight official topics, one conservation story: charge moves because a potential difference exists; circuit geometry and materials determine resistance; power tracks energy transfer; complex networks are governed by conservation of energy and charge; capacitors create time-dependent switching behavior. Unit 11 is a major AP Physics 2 unit, so the goal is not merely “find the current.” You must move fluently among schematics, graphs, equations, experiments, and explanations.
The strongest circuit students ask three questions before calculating: Is there a closed path? → Which points are at the same potential? → What must be conserved?
11.1 · Electric Current
Current is a rate, not a substance
Average current through a cross section is charge per time:
Conventional current points in the direction positive charge would move. In a metal, electrons drift in the opposite direction.
Current has an assigned direction but is a scalar flow rate. Use signed branch rates in the junction rule; current arrows are not spatial force vectors to be added by components.
AP misconception · zero current
Zero current does not mean every charge carrier is motionless. At ordinary temperatures electrons still have microscopic thermal motion. Zero current means there is no net drift of charge through the chosen cross section.
Graph routine
For a $Q$–$t$ graph, compare slopes, not heights. A larger accumulated charge does not automatically mean a larger current at that instant.
Quick Check 1
A wire carries $3.2\,\mathrm{mA}$ for $5.0\,\mathrm s$. How much charge passes a cross section, and approximately how many electron charges is that?
$\Delta q=I\Delta t=(3.2\times10^{-3})(5.0)=1.6\times10^{-2}\,\mathrm C$. Dividing by $e=1.60\times10^{-19}\,\mathrm C$ gives about $1.0\times10^{17}$ electron charges. The electron drift direction is opposite the conventional-current direction.
2
11.2 · Simple Circuits
A circuit diagram is a topology map. Wire shape is mostly decoration; connections and junctions determine the physics.
Closed
A complete path exists from one source terminal through elements and back to the other. Sustained current may flow.
Open
A break destroys the complete path. The branch current is zero.
Short
A nearly zero-resistance path connects two points that should have a potential difference. It can bypass a component and produce a very large source current.
Trace loops, not “nearby components”
Pick a battery terminal.
Trace an unbroken conducting path through the component.
Confirm that the path returns to the other battery terminal.
If a switch opens the only return path, that branch cannot sustain current.
Current is not “used up”
Charge is conserved. A resistor or bulb transfers energy from the electrical system to other forms; it does not consume current. In a single series path, the same current enters and leaves each element.
Battery language
A battery does not act as a warehouse that “stores current.” It maintains a potential difference by transferring energy per unit charge. Current is the rate of charge flow in the external circuit.
Current CED convention
Unless a diagram states otherwise, AP circuit schematics use conventional current.
Quick Check 2
Two lamps must operate independently from one battery. What connection is required?
Put the lamps in separate parallel branches, with one switch in series with each lamp. Then opening one branch does not break the closed loop through the other branch.
Limits of the ideal short model
An ideal wire across a component forces that component’s terminals to the same potential. Keep a finite resistance elsewhere if you calculate source current. Directly connecting the terminals of an ideal zero-resistance battery with an ideal wire does not give a consistent finite-current model; real internal and wire resistances then matter.
3
11.3 · Resistance, Resistivity & Ohm’s Law
Geometry + material
For a uniform wire,
$R=\rho\dfrac{L}{A}$
$\rho$ is a material property; $L$ is wire length; $A$ is cross-sectional area. For a circular wire, $A=\pi d^2/4$, so at fixed material and length, $R\propto1/d^2$.
Use a uniform material and cross section. Real metallic resistivity usually rises with temperature; the ideal ohmic model used in calculations keeps resistance fixed. In an experiment, control temperature when testing a fixed-resistance relationship.
Make it longer
More collisions along the path → larger resistance. $L\times k\Rightarrow R\times k$.
Make it thicker
More parallel microscopic paths → smaller resistance. $A\times k\Rightarrow R/k$.
Ohm’s law
For an ohmic element under conditions where its resistance is constant,
$\Delta V=IR$
Ohm’s law is a model for elements that have constant $R$ over the range considered; it is not a universal statement that every device has constant resistance.
For a nonlinear device, operating-point resistance is V/I. Its secant from the origin gives I/V; do not substitute a changing local graph slope as though resistance were constant.
Slope trap
If the graph is $I$ versus $\Delta V$, slope $=1/R$. If the graph is $\Delta V$ versus $I$, slope $=R$. Always read the axis labels before using “slope = resistance.”
Temperature
Real conducting materials commonly change resistance as temperature changes. A resistor that heats significantly can become non-ohmic over the measured range.
Worked scaling
A replacement wire has twice the length and half the diameter of the original. Since $A\propto d^2$, the new area is one quarter. Therefore $R' /R=(2)/(1/4)=8$.
Quick Check 3
An $I$–$\Delta V$ graph is a straight line through the origin with slope $0.25\,\mathrm{A\,V^{-1}}$. Find $R$.
Because the vertical axis is $I$, slope $=I/\Delta V=1/R$. Thus $R=1/0.25=4.0\,\Omega$.
Choose the form that matches what is actually held constant in the circuit.
Situation
Useful form
Reasoning
Same current (series elements)
$P=I^2R$
Larger $R$ dissipates more power.
Same potential difference (parallel branches)
$P=(\Delta V)^2/R$
Smaller $R$ dissipates more power.
Known $I$ and $\Delta V$
$P=I\Delta V$
No extra substitution needed.
Brightness model
For comparable bulbs, greater electrical power means greater brightness. Do not rank brightness from resistance alone; first identify whether current or voltage is shared.
For numerical brightness comparisons, treat the stated bulb resistances as constant and compare comparable lamps. Real filament resistance changes as the filament heats, so nominal ratings alone need an explicit model when used away from rated conditions.
Functional dependence · fixed power design
If a heater must operate at fixed power $P_0$ while supply voltage is varied, then
$R=\dfrac{(\Delta V)^2}{P_0}$
So an $R$ versus $\Delta V$ graph curves upward. Doubling voltage requires four times the resistance. For a greater target power at the same voltage, the required resistance is smaller.
Do not mix conditions
“Larger resistance → larger power” is true at fixed current; “larger resistance → smaller power” is true at fixed voltage. AP questions often test whether you identify the constraint before choosing an equation.
Quick Check 4
Two resistors $R$ and $2R$ are connected in parallel to the same ideal battery. Compare their powers.
Both branches have the same $\Delta V$. Using $P=(\Delta V)^2/R$, the resistor $R$ dissipates twice the power of the resistor $2R$.
5
11.5 · Compound DC Circuits
A circuit must conserve charge at junctions and energy around loops.
Voltage is a two-point comparison; current describes charge passing a cross-section per time.
Build a node map before combining resistors.
Series/parallel rules are not memorized decorations; they encode which quantity is shared by the topology.
Connection
Shared quantity
Equivalent rule
Sanity check
Series
same current
$R_{eq}=\sum R_i$
$R_{eq}$ is larger than any individual $R$.
Parallel
same potential difference
$\dfrac1{R_{eq}}=\sum\dfrac1{R_i}$
$R_{eq}$ is smaller than the smallest branch $R$.
The reduce → solve → expand routine
Mark nodes and identify genuine series/parallel groups.
Reduce the deepest group to an equivalent resistance.
Find total current from the source.
Work back outward: recover voltage drops, then branch currents.
Check junction currents and total power.
Series means “no branching between”
Two resistors drawn next to each other are not necessarily in series. They are in series only if any charge through one must pass through the other with no junction between them.
Adding a parallel path
Adding another finite-resistance branch in parallel lowers $R_{eq}$. With an ideal fixed-voltage source, total current and source power increase.
Quick Check 5
An $18\,\mathrm V$ ideal battery drives a $6\,\Omega$ resistor in series with $12\,\Omega$ and $4\,\Omega$ in parallel. Find the source current and current through the $4\,\Omega$ branch.
$12\parallel4=3\,\Omega$, so $R_{eq}=9\,\Omega$ and source current is $2.0\,\mathrm A$. The parallel section has $\Delta V=(2.0)(3)=6.0\,\mathrm V$, so the $4\,\Omega$ branch current is $6/4=1.5\,\mathrm A$.
6
11.5 · Real Batteries & Meters
Nonideal battery model
Model a real battery as an ideal emf $\varepsilon$ in series with internal resistance $r$. While supplying current,
$V_{terminal}=\varepsilon-Ir$
At zero current, the terminal potential difference approaches the emf.
Graph intelligence
Plot $V_{terminal}$ vertically against $I$ horizontally. Comparing with $y=b+mx$ gives: vertical intercept $=\varepsilon$ and slope $=-r$.
Ammeter
Measures current at a point. Connect in series. Ideal $R_A=0$ so it does not alter current.
Voltmeter
Measures potential difference between points. Connect in parallel. Ideal $R_V\to\infty$ so it draws no current.
AP boundary · nonideal meters
You need only qualitative reasoning about how finite ammeter resistance or finite voltmeter resistance changes the circuit. Unless stated otherwise, batteries, wires, and meters are ideal. Circuits with batteries of different potential differences connected in parallel are outside the required scope.
Meter effect
A nonideal ammeter adds series resistance, reducing the current it is trying to measure. A nonideal voltmeter provides a finite parallel path, changing the circuit it is measuring.
AP combination · meter + power design
If a nonideal ammeter is placed in series with a heater, some of the source potential difference is across the meter. Therefore the heater does not receive the full source voltage. Do not use $P=(\Delta V_{source})^2/R_{heater}$ as though the meter were ideal; either reason qualitatively about the added series resistance or use the actual heater voltage. This is a classic AP test of whether you distinguish source voltage from component voltage.
Quick Check 6
A battery has $\varepsilon=12.0\,\mathrm V$ and $r=1.0\,\Omega$ and supplies a $5.0\,\Omega$ load. Find $I$ and $V_{terminal}$.
Total resistance is $6.0\,\Omega$, so $I=12/6=2.0\,\mathrm A$. Then $V_{terminal}=12-(2)(1)=10\,\mathrm V$, which also equals $IR_{load}=(2)(5)=10\,\mathrm V$.
7
11.6 · Kirchhoff’s Loop Rule
Loop rule is energy conservation per coulomb. Around a complete loop, every rise in electric potential must be balanced by drops.
Loop rule
$\sum \Delta V=0$
Choose a traversal direction, then assign signs consistently.
Crossing
$\Delta V$
Ideal battery from $-$ to $+$
$+\varepsilon$
Ideal battery from $+$ to $-$
$-\varepsilon$
Resistor in direction of conventional current
$-IR$
Resistor opposite conventional current
$+IR$
Potential–position graphs
AP explicitly expects this representation. Ideal wires are flat; batteries make jumps; resistor segments drop in the current direction. Returning to the starting point must return to the starting potential.
A negative current is information
If you assume a current direction and solve to get $I<0$, the algebra is not “wrong.” The actual current flows opposite your assumed arrow.
Quick Check 7
A loop has a $12\,\mathrm V$ ideal battery and $2\,\Omega$ and $4\,\Omega$ resistors in series. Write the clockwise loop equation and find $I$.
Traversing the battery from $-$ to $+$ and then through both resistors with the current: $12-2I-4I=0$. Hence $I=2.0\,\mathrm A$. The potential drops are $4\,\mathrm V$ and $8\,\mathrm V$.
8
11.7 · Kirchhoff’s Junction Rule
Charge conservation at a node
$\sum I_{in}=\sum I_{out}$
Charge does not steadily pile up at an ordinary circuit junction in the steady-state DC model.
Fast node equation
If $3.2\,\mathrm A$ enters a junction and one outgoing branch carries $1.1\,\mathrm A$, the other outgoing current is $2.1\,\mathrm A$.
Equal potential can be more powerful than reduction
If two nodes are at the same electric potential, any ohmic element directly between them has $\Delta V=0$ and therefore $I=0$. Symmetric or balanced networks often hide this shortcut.
Bulb-removal reasoning
When a branch is removed, redraw the topology before doing arithmetic. Ask: which branches remain across the source? Does $R_{eq}$ change? Does the source behave ideally or have internal resistance? Then infer changes in branch current and power.
Same resistance ≠ same current
Equal resistances have equal currents only if they also experience equal potential differences. Their positions in the network matter.
Quick Check 8
In an ideal-battery circuit, two independent parallel branches remain connected when a third branch is removed. What happens to current in each unchanged branch and to total battery current?
Each unchanged branch still has the same battery potential difference, so its current is unchanged. The total current decreases because one branch current has been removed, and $R_{eq}$ increases.
9
11.8 · Capacitors in Circuits
Unit 10 taught what one capacitor is. Unit 11 asks how multiple capacitors behave in networks and during switching.
Capacitors
Equivalent capacitance
What is shared?
Parallel
$C_{eq}=\sum C_i$
same $\Delta V$
Series
$\dfrac1{C_{eq}}=\sum\dfrac1{C_i}$
same magnitude of charge on each series capacitor
Resistor rules are reversed
Parallel resistors add by reciprocals, but parallel capacitors add directly. Series capacitors add by reciprocals. Use physical reasoning: parallel plates effectively add area; series separation effectively increases.
Two-capacitor example
$6.0\,\mu\mathrm F$ and $3.0\,\mu\mathrm F$ in series give
$C_{eq}=\dfrac{(6)(3)}{6+3}=2.0\,\mu\mathrm F$
If this pair is across $12\,\mathrm V$, the series charge magnitude is $Q=C_{eq}\Delta V=24\,\mu\mathrm C$ on each capacitor. Their individual voltages are then $Q/C_i$ and add to $12\,\mathrm V$.
Switch questions · state first
Before reducing a capacitor network, label the switch state and ask which capacitors are connected to which nodes. A switch can change the effective series/parallel grouping.
Quick Check 9
A $4\,\mu\mathrm F$ capacitor and a $6\,\mu\mathrm F$ capacitor are in parallel. Find $C_{eq}$.
Parallel capacitances add directly: $C_{eq}=4+6=10\,\mu\mathrm F$. Both capacitors have the same potential difference.
Series-charge condition
The equal-charge rule here applies when the capacitors start uncharged and each isolated middle conductor is initially neutral. Charge conservation then leaves equal-magnitude opposite charges on the connected middle plates. Precharged middle conductors require their actual initial charge state.
10
11.8 · RC Circuits & Switching
In an RC process, capacitor voltage cannot jump instantaneously in the ideal model with finite current.
At long times with a d.c. supply, the charged capacitor branch carries no steady current.
Initial and final circuit states need different reasoning.
Time constant
$\tau=R_{eq}C_{eq}$
$\tau$ measures how quickly a capacitor circuit approaches its new steady state. Use the resistance “seen” by the relevant capacitor network in the switch configuration being analyzed.
Use one equivalent resistance-capacitance combination for the simple networks here. Identify the actual charging or discharging path in the stated switch position. Do not apply the same RC product to a different path merely because the same parts are present.
Charging
At $t=0$ an initially uncharged ideal capacitor behaves like a wire. As it charges, $Q$ and $V_C$ rise toward final values while branch current falls. At $t=\tau$, charge is about 63% of its final value.
Discharging
Stored charge, $|V_C|$, and current magnitude decrease toward zero. At $t=\tau$, charge is about 37% of its initial value.
Non-negotiable AP boundary
For charging/discharging behavior, AP Physics 2 requires qualitative descriptions and representations. You may calculate $\tau$ and mathematically analyze initial and final states, but you are not expected to model $Q(t)$, $V_C(t)$, or $I(t)$ with exponential equations.
Immediate vs long time
Immediately after switching: preserve the capacitor’s initial charge state. An initially uncharged capacitor can be replaced by a wire for that instant. Long after charging: a fully charged capacitor branch has zero DC current and can be treated as open for steady-state analysis.
A capacitor that starts charged must retain its initial voltage at the switching instant in a finite-resistance circuit; it cannot automatically be replaced by a wire. A separate resistor-only branch can carry current even when the capacitor branch has reached zero current.
Quick Check 10
A $2.0\,\mathrm{k\Omega}$ resistor charges a $50\,\mu\mathrm F$ capacitor. Find $\tau$ and state the approximate charge fraction at $t=\tau$.
$\tau=RC=(2.0\times10^3)(50\times10^{-6})=0.10\,\mathrm s$. During charging, $Q\approx0.63Q_f$ at one time constant. No exponential equation is needed.
11
AP Lab & Representation Intelligence
Unit 11 is one of the strongest AP units for experimental design. Your graph must not merely look straight—it must make a physical quantity emerge from the slope or intercept.
Resistivity of a wire
Measure diameter at several positions; use $A=\pi d^2/4$.
Use several wire lengths $L$.
For each length, measure $V$ and $I$ with correct meter placement; calculate $R=V/I$.
Keep temperature as constant as practical by using small current / brief measurements.
Plot $R$ vs $L$. Slope $=\rho/A$, so $\rho=(\text{slope})A$.
A constant contact resistance inside the voltage-sensing boundary can add a measured intercept: $R_m=(\rho/A)L+R_c$. Fit a free intercept rather than assigning it to material resistivity. Resistance outside the voltage-probe boundary does not directly add to the measured V.
Internal resistance of a battery
Change load resistance to obtain several currents.
Measure terminal voltage and current for each setting.
Plot $V_{terminal}$ vs $I$.
From $V=\varepsilon-rI$: intercept $=\varepsilon$, slope $=-r$.
AP experimental technique · infer a quantity you cannot measure directly
Suppose no voltmeter is available, but a known resistor $R_0$ carries measured current $I_0$. Then the battery terminal voltage can be inferred from $V_{terminal}=I_0R_0$. If a second branch carries current $I_2$, the battery current is $I_{bat}=I_0+I_2$. Plotting inferred $V_{terminal}=I_0R_0$ vertically against $I_{bat}$ horizontally turns $V_{terminal}=\varepsilon-rI_{bat}$ into a straight line: intercept $=\varepsilon$, slope $=-r$. AP experiments often reward this “measure indirectly, then linearize” move.
$Q$ vs $t$
Slope gives current. If slope changes, current changes.
$I$ vs $\Delta V$
For an ohmic element, straight line through origin; slope $=1/R$.
$V$ vs position
Flat on ideal wires; rises across sources; drops across resistive elements along current.
RC graphs
Sketch asymptotic qualitative curves and identify initial/final values plus $\tau$ landmarks.
Experimental detail that earns points
State what you measure, what you vary, what you hold fixed, how you reduce uncertainty, which graph you plot, and exactly what its slope/intercept means. “Repeat and average” is useful only when paired with a sensible measurement plan.
Quick Check 11
Why is plotting $R$ versus $L$ better than using one wire-length measurement to determine $\rho$?
Multiple lengths create a best-fit relationship, reduce the influence of random measurement scatter, and allow the slope to encode $\rho/A$. It also helps reveal a nonzero intercept from contact/lead resistance rather than silently folding that systematic effect into the material resistivity.
12
Unit 11 · AP Master Sheet
Eight-topic equation + reasoning chain
Topic
Core relationship / representation
Technique
11.1 Current
$I=\Delta q/\Delta t$
$Q$–$t$ slope; conventional current vs electron drift
Predict a change first, derive a symbolic factor, then check whether the algebra agrees with the prediction.
High-value traps
Current is not consumed.
Zero current does not mean carriers are motionless.
Series/parallel must be decided from topology, not appearance.
$I$–$V$ graph slope is $1/R$, not $R$.
Power ranking depends on what is shared.
Ideal wires are equipotential.
Nonideal meter effects are qualitative only.
Do not use exponential RC equations in AP Physics 2 Unit 11.
Final-answer audit
Before leaving a circuit question: check current conservation at junctions, potential conservation around loops, equivalent-resistance bounds, source power versus component powers, units, and whether your result behaves correctly in an obvious limiting case.
Quick Check 12
A student says, “I solved the equations, so I’m done.” What three independent physics checks can validate a multi-loop answer?
At minimum: (1) currents satisfy every relevant junction rule, (2) potential changes sum to zero around each independent loop, and (3) calculated powers/energy transfers are physically consistent. You can also check equivalent-resistance bounds and limiting cases.
Scope authority: uploaded College Board AP Physics 2 Course and Exam Description, Unit 11 topics 11.1–11.8. Nonideal meter effects are qualitative. Unequal-voltage batteries in parallel are excluded. Companion questions are PHYSICS CREST training items.