The supplied course framework lists Unit 7 at 5–8% AP exam weighting. It is built around four current topics: defining SHM, period/frequency, representing SHM, and energy. The recurring AP demand is to move between force diagrams, graphs, equations, energy models, experiments, and verbal justification. Damping and resonance are not current AP Physics 1 Unit 7 content.
7.1 · What makes motion simple harmonic?
Oscillation repeats motion about equilibrium.
For simple harmonic motion, the restoring acceleration is proportional to displacement and points towards equilibrium.
The equilibrium location can shift without changing the basic restoring relationship.
The SHM test
Periodic motion becomes simple harmonic motion when the restoring interaction gives a net force whose magnitude is proportional to displacement from equilibrium and whose direction is opposite that displacement:
$$F_{net}\propto -x.$$
For an ideal spring measured from equilibrium, $F_{net}=-kx$.
At an extreme: speed is zero, restoring force magnitude is maximum.
At equilibrium: net force and acceleration are zero, speed is maximum.
Between: velocity and acceleration may point the same way or opposite ways depending on whether the oscillator is speeding up or slowing down.
Oscillatory does not mean SHM
A block moving back and forth on a frictionless V-shaped track is periodic, but the component of gravity along either straight ramp is approximately constant, not proportional to distance from the bottom. It oscillates, but it is not SHM.
Quick Check 1
A force-position graph is a straight line through the origin with negative slope. What does that tell you?
The force is proportional to $-x$, so it has the restoring-force form required for SHM over the plotted range.
2
Equilibrium Is the Zero That Matters
Horizontal spring
For an ideal horizontal spring on a frictionless surface, equilibrium coincides with the spring's unstretched position. If $x$ is measured from that equilibrium, $F_{net}=-kx$ directly.
The equilibrium position is where net force is zero.
On a $F_{net}$–$x$ graph, the equilibrium is the zero crossing. A negative straight-line slope is the graphical signature of a linear restoring net force. In a one-dimensional oscillator of constant mass, this gives SHM.
Vertical spring: spring force is not zero at equilibrium
Assume a light ideal spring, a constant gravitational field, and negligible dissipation. For a hanging mass, gravity shifts the equilibrium. If the spring extends by $x_{eq}$ at rest,
$$kx_{eq}=mg.$$
Now measure the oscillation coordinate $y$ from that equilibrium. The constant $mg$ is already balanced by the equilibrium spring stretch, leaving
$$F_{net}=-ky.$$
This is why a vertical spring has the same period formula as a horizontal spring.
Adding an extra mass $\Delta m$ shifts the equilibrium by $\Delta x=\Delta m\,g/k$.
Do not confuse natural length with equilibrium length.
AP transfer technique
When College Board gives a force-position graph, first locate the point where $F_{net}=0$. That is the equilibrium. Then inspect whether the force reverses direction on opposite sides and whether its magnitude grows linearly with $|x|$.
Quick Check 2
A 0.20 kg mass is added gently to a platform on a vertical spring with $k=80\,\mathrm{N/m}$. How much lower is the new equilibrium?
The shift is $\Delta x=\Delta m g/k=(0.20)(9.8)/80=0.0245\,\mathrm m$, about $2.45$ cm.
3
Pendulum · SHM as a Small-Angle Model
Restoring torque
For a simple pendulum, gravity has a tangential component that pulls the bob toward the lowest point. The exact restoring factor contains $\sin\theta$, so the motion is not exactly SHM at arbitrary angle. For small angular displacement, $\sin\theta\approx\theta$ (radians), so the restoring torque is approximately proportional to $-\theta$.
Equilibrium: string vertical.
At an extreme: speed zero, tangential restoring effect greatest.
At the bottom: tangential acceleration is zero, but the bob can still have radial (centripetal) acceleration because it is moving fastest.
Zero SHM acceleration ≠ zero total acceleration
At the bottom of a pendulum swing, the tangential SHM restoring acceleration is zero, but the bob moving along a curved path has radial acceleration $v^2/L$ toward the pivot.
Same release angle, different length
Energy gives the vertical drop $h=L(1-\cos\theta_0)$, so
$$v_{bottom}^2=2gL(1-\cos\theta_0).$$
A longer pendulum released from the same angle has a larger bottom speed. But the radial acceleration at the bottom is
$$a_r=\frac{v^2}L=2g(1-\cos\theta_0),$$
which is independent of $L$ for the same release angle. This is a high-value multi-model AP reasoning pattern.
Quick Check 3
Two pendulums have the same bob and same small release angle; one string is four times longer. Compare their periods.
Since $T\propto\sqrt L$, the longer pendulum has twice the period.
4
7.2 · Spring Period and Frequency
For an ideal mass–spring oscillator, T = 2π√(m/k).
These models have assumptions: a spring must stay in its linear regime and a pendulum angle must be small.
A larger amplitude means a longer path, but the restoring force and characteristic speeds also become larger. In ideal SHM those effects scale together so the cycle time remains fixed.
Timing landmarks when released from rest at +A
Time
Position
Speed
$0$
$+A$
0
$T/4$
0
maximum
$T/2$
$-A$
0
$3T/4$
0
maximum
$T$
$+A$
0
Quick Check 4
A $0.50$ kg block oscillates on a $200\,\mathrm{N/m}$ spring. Find $T$.
$T=2\pi\sqrt{0.50/200}=0.314\,\mathrm s$.
5
Pendulum Period · Scaling and Experimental Use
For a small-angle simple pendulum, T = 2π√(L/g).
Small-angle pendulum$T=2\pi\sqrt{\dfrac{L}{g}}$
Frequency$f=\dfrac1{2\pi}\sqrt{\dfrac gL}$
Independent ofbob mass; small-angle amplitude
Functional-dependence thinking
$T\propto\sqrt L$ and $T\propto1/\sqrt g$.
length ×4 → period ×2
gravity ÷9 → period ×3
bob mass changes → period unchanged
Linearize instead of using one trial
Square the period equation:
$$T^2=\frac{4\pi^2}{g}L.$$
Plot $T^2$ vertically against $L$ horizontally. The best-fit slope is $4\pi^2/g$, so $g=4\pi^2/\text{slope}$.
Better timing
Time many oscillations and divide by the number of cycles. Repeat trials, use a broad range of lengths, and use a best-fit line. Timing ten or twenty periods reduces the fractional effect of reaction-time error compared with timing one period.
Quick Check 5
A pendulum is moved to a world where $g$ is one quarter of Earth's value. What happens to $T$?
$T\propto1/\sqrt g$, so reducing $g$ by a factor of 4 doubles the period.
6
7.3 · The SHM State Clock
Translate, do not memorize three disconnected graphs
At every instant ask three questions: Where is it?Which way is it moving?Which way is equilibrium? Those answers determine the signs and relative sizes of $x$, $v$, and $a$.
If released from rest at $+A$, $x$ begins at a positive maximum, $v=0$, and $a$ is a negative maximum.
At equilibrium, $x=0$, $a=0$, and $|v|$ is maximum.
Acceleration is always directed toward equilibrium.
Location
$|v|$
$|a|$
Energy
$x=0$
maximum
0
$K$ max, $U$ min
$0<|x|<A$
between 0 and max
between 0 and max
$K$ and $U$ both present
$|x|=A$
0
maximum
$U$ max, $K=0$
Position sign does not determine velocity sign
At $x>0$ the oscillator might be moving right (away from equilibrium) or left (toward equilibrium). The sign of $v$ comes from the direction of motion; the sign of $a$ comes from the direction toward equilibrium.
Quick Check 6
At $x=-A/2$ the oscillator is moving toward equilibrium. What are the signs of $v$ and $a$ if +x is right?
Both are positive: the object is moving right, and the restoring acceleration also points right toward equilibrium.
7
From a Motion Description to Equations and Graphs
Position model
For an equilibrium coordinate and the corresponding choice of time origin, SHM position can be represented as
$$x=A\cos(2\pi ft)\quad\text{or}\quad x=A\sin(2\pi ft),$$
depending on the starting condition. A general start can be written $x=A\cos(2\pi ft+\phi)$, with phase constant $\phi$. If the object is released from rest at $+A$ at $t=0$, cosine is the natural choice.
Acceleration-position graph
For an ideal spring, $a=F/m=-(k/m)x=-\omega^2x$.
Therefore an $a$–$x$ graph is a straight line through the origin with slope $-\omega^2$. This graph is a powerful representation test for SHM.
Speed-position relation from energy
For a spring oscillator,
$$\frac12kA^2=\frac12kx^2+\frac12mv^2.$$
Using $k/m=\omega^2$ gives
$$v^2=\omega^2(A^2-x^2).$$
This immediately shows $v=0$ at $|x|=A$ and $|v|=\omega A$ at $x=0$.
Maximum speed$v_{max}=\omega A=\dfrac{2\pi A}{T}$
Maximum acceleration$a_{max}=\omega^2A$
Acceleration graphslope of $a$ vs $x$ is $-\omega^2$
Representation translation routine
Given $x(t)$: use its slope for the sign of velocity and use “toward equilibrium” for acceleration. Given $a(x)$: identify equilibrium at $a=0$ and read $\omega$ from the slope magnitude. Given energy or force: reconstruct the motion instead of hunting for a memorized graph.
Quick Check 7
An oscillator has $A=0.10$ m and $\omega=10\,\mathrm{rad/s}$. Find its speed at $x=0.060$ m.
Total mechanical energy is constant for the ideal oscillator.
For the horizontal spring model, with U=0 at equilibrium, all oscillator energy is kinetic there.
At either extreme all of it is elastic spring potential energy.
Energy at any displacement
$$K=\frac12k(A^2-x^2).$$
At $x=A/2$, the spring potential energy is $U=E/4$, so the kinetic energy is $3E/4$.
Amplitude scaling
For fixed mass and spring constant, $E=\tfrac12kA^2\propto A^2$, $v_{\max}=A\sqrt{k/m}\propto A$, and $a_{\max}=(k/m)A\propto A$. Doubling amplitude leaves the period unchanged, doubles maximum speed, doubles maximum acceleration, and quadruples total energy.
Mass and maximum kinetic energy
For the same spring constant and amplitude, $K_{\max}=E=\tfrac12kA^2$ is the same even if the attached masses differ. Since $v_{\max}=A\sqrt{k/m}$, a heavier oscillator has a smaller maximum speed; the factor of $m$ in $\tfrac12mv_{\max}^2$ is exactly cancelled by $v_{\max}^2\propto1/m$.
Quick Check 8
A spring with $k=80\,\mathrm{N/m}$ oscillates with amplitude $0.15$ m. Find the total energy.
$E=\tfrac12(80)(0.15)^2=0.90\,\mathrm J$.
9
Vertical SHM · Position, Work, and Graphs
Choose the coordinate from equilibrium
Let $y$ be vertical displacement from the equilibrium height, positive upward. Then the net force is $F_{net}=-ky$, so
$$a=-\frac{k}{m}y.$$
The acceleration-versus-height graph is therefore linear with negative slope and crosses zero at the equilibrium height. When energy is written as $\tfrac12ky^2$ in this shifted coordinate, it represents the combined spring–Earth potential change relative to equilibrium, not the elastic spring energy by itself.
Velocity versus height is not a straight line
From the spring-oscillator energy relative to equilibrium,
$$v^2=\omega^2(A^2-y^2).$$
A plot of $v$ versus $y$ for one direction of motion is curved; a plot of $v^2$ versus $y^2$ is linear. AP questions may ask you to connect this shape with the force or work model.
Work bookkeeping
If a vertical oscillator moves between two heights, gravity and the spring can each do work. The net work equals the change in kinetic energy. Keep those statements separate: $W_g$, $W_s$, and $W_{net}$ are not interchangeable.
Gravity work$W_g=mg(y_i-y_f)$
Net work$W_{net}=\Delta K$
Spring work$W_s=W_{net}-W_g$ when these are the only forces doing work
Height is not automatically displacement from equilibrium
If a graph uses height above the floor, first locate the equilibrium height before applying $a\propto -y$. The SHM coordinate is measured from equilibrium, not from an arbitrary floor or tabletop origin.
Quick Check 9
On an acceleration-versus-height graph for a vertical oscillator, where is equilibrium?
At the height where the graph crosses $a=0$.
10
AP Transfer Problems · Combine Old Models
Unit 7 is rarely just “plug in T”
Strong questions combine SHM with Newton's laws, static friction, circular motion, energy, or experimental reasoning. The oscillator model tells you the motion; earlier units tell you the forces and energy transfers.
Stacked blocks: no-slip amplitude limit
A lower block on a frictionless horizontal track is attached to an ideal spring, and a top block stays at rest relative to it.
The top block is accelerated only by static friction.
If the combined moving mass is $M$, then the largest SHM acceleration is
$$a_{max}=\frac{kA}{M}.$$
The top block requires $m_{top}a_{max}\le \mu_s m_{top}g$. Hence
$$A\le\frac{\mu_sMg}{k}.$$
The top mass cancels from its own friction requirement, but it still contributes to the total oscillating mass $M$.
Pendulum bottom: two accelerations in one problem
The tangential restoring acceleration is zero at the lowest point, but the radial acceleration is $v^2/L$. Use energy to find $v$ and circular-motion reasoning to find the radial acceleration.
Do not force one formula onto the entire problem
The period formula, the SHM force relation, energy conservation, and centripetal acceleration describe different parts of the physics. AP FRQs often reward knowing when to switch models.
Quick Check 10
Two blocks of total mass $1.2$ kg oscillate together on a $60\,\mathrm{N/m}$ spring. If $\mu_s=0.25$, what maximum amplitude prevents slipping?
Spring timing: vary mass, time many cycles, calculate $T$, then graph $T^2$ vs $m$.
Pendulum timing: vary length and graph $T^2$ vs $L$.
Use slopes to determine physical constants instead of relying on one trial.
Goal
Linear form
Useful graph
Slope gives
spring constant $k$
$T^2=(4\pi^2/k)m$
$T^2$ vs $m$
$4\pi^2/k$
gravity $g$
$T^2=(4\pi^2/g)L$
$T^2$ vs $L$
$4\pi^2/g$
spring constant from speed
$mv_{max}^2=kA^2$
$mv_{max}^2$ vs $A^2$
$k$
Experimental checklist
State what you will measure, what you will vary, what stays controlled, how many trials/repeats you will use, what graph you will make, and exactly how slope/intercept gives the requested quantity.
“Plot a graph” is not enough
Name both axes, include the transformed variables, and connect the slope algebraically to the desired constant. A best-fit line over a broad data range is stronger than forcing a line through a single pair of points.
Quick Check 11
For a spring experiment, a graph of $T^2$ vs $m$ has slope $0.80\,\mathrm{s^2/kg}$. Find $k$.
$k=4\pi^2/0.80=49.3\,\mathrm{N/m}$.
12
Unit 7 · AP Transfer Sheet
Four current FRQ routines
MR: begin from a principle and derive. TBR: connect diagrams, graphs, energy bars, and equations. LAB: choose measurements, linearize, use slope/intercept, and reduce uncertainty. QQT: make a qualitative claim first, then test it quantitatively.
Idea
Relationship
What to recognize
SHM test
$F_{net}\propto-x$
restoring and proportional
spring period
$T=2\pi\sqrt{m/k}$
amplitude independent
pendulum period
$T=2\pi\sqrt{L/g}$
small angle; mass independent
position
$x=A\cos(2\pi ft)$ or $A\sin(2\pi ft)$
phase from starting condition
spring SHM
$a=-\omega^2x$
straight $a$–$x$ graph, negative slope
maximum speed
$v_{max}=\omega A$
at equilibrium
energy
$E=\tfrac12kA^2$
$E\propto A^2$
energy at x
$K=\tfrac12k(A^2-x^2)$
energy exchange
Final boundary traps
Do not import damping/resonance into current AP Physics 1 Unit 7.
A pendulum is modeled as SHM only for small angular displacement.
Period is independent of amplitude only within the ideal SHM model.
Equilibrium means net force zero; a vertical spring can still exert a nonzero force there.
At the bottom of a pendulum, tangential SHM acceleration can be zero while radial acceleration is not.
Continue the ecosystem
·
Quick Check 12
If amplitude doubles on the same ideal spring oscillator, what happens to period, $v_{max}$, $a_{max}$, and total energy?
Period is unchanged; $v_{max}$ doubles; $a_{max}$ doubles; total energy quadruples.