Unit 4 · Linear Momentum
4.1 · Linear Momentum
- MomentumA vector property of a moving object or system.
- ImpulseIts change due to external force over time.
- A large force over a short time and a smaller force over a longer time can produce the same impulse.
Choose a positive direction first. Then keep velocity and momentum signs consistent.
In the sketch, $p_1=(2m)(+v)=+2mv$ and $p_2=m(-2v)=-2mv$. Total momentum is zero even though both objects are moving.
Impulse = Momentum Transfer
4.2 · Change in Momentum and Impulse
- Net external impulse changes the chosen system’s momentum.
- The impulse of an individual force equals the momentum change only when other force impulses cancel or are negligible.
- Instantaneous net force is the local slope of p versus t; a finite interval gives the average force.
If $v_i=+5$ m/s and $v_f=-3$ m/s, then $\Delta v=-8$ m/s—not $-2$ m/s.
The impulse points in the direction of $\Delta\vec p$.
Graph Intelligence
- Area under an external force–time graph gives impulse.
- When net external impulse is negligible, a system’s total momentum is conserved.
- This does not require kinetic energy to remain constant in a collision.
$F_{net}$–$t$ graph
Signed area = impulse = $\Delta p$.
Area above axis adds positive momentum; below axis adds negative momentum.
$p$–$t$ graph
Slope = $F_{net}$.
Horizontal $p(t)$ means zero net external force, not necessarily zero momentum.
Force is the slope of momentum: steeper $p(t)$ means larger net force.
Impulse is the change in the vertical coordinate of the momentum graph.
Do not confuse this with Unit 3: area under an $F$–position graph gives work; area under an $F$–time graph gives impulse.
Same Impulse, Different Force
Equal areas mean equal impulses. Shape and peak force may differ.
AP trap: “smaller force” does not mean “smaller impulse” if the interaction lasts longer.
4.3 · Conservation of Linear Momentum
Center-of-mass velocity
For a collection of objects, $$\vec v_{cm}=\frac{\sum_i m_i\vec v_i}{\sum_i m_i}=\frac{\vec p_{tot}}{M_{tot}}.$$ If net external force is zero, $\vec v_{cm}$ is constant.
Starting from rest gives $p_{tot}=0$, so the two objects leave with equal and opposite momenta—not generally equal speeds.
Lighter object → larger speed magnitude for the same momentum magnitude.
1D Collision Workflow
A $2$ kg cart moves right at $5$ m/s and sticks to a $3$ kg cart moving left at $1$ m/s. External horizontal impulse is negligible during contact.
Choose right positive:
$$2(5)+3(-1)=(2+3)v_f$$ $$v_f=\frac{7}{5}=1.4\,\mathrm{m\,s^{-1}}\text{ right}.$$Explosions, Recoil & 2D Reasoning
Explosion model
Internal forces move parts apart. If initial total momentum is zero and external impulse is negligible, the vector sum after remains zero.
A device separates into masses $m$ and $2m$. The $m$ piece moves east at $6$ m/s.
$$0=m(6)+2m(v_2)\Rightarrow v_2=-3\,\mathrm{m\,s^{-1}}.$$The heavier piece moves west more slowly.
Current AP1 2D boundary
If initial y-momentum is zero, final y-components must cancel.
If one fragment gains a larger upward momentum component, the rest of the system must have a more negative y-component.
4.4 · Elastic and Inelastic Collisions
| Collision | Total momentum | Total kinetic energy | Key clue |
|---|---|---|---|
| Elastic | Conserved if external impulse negligible | Conserved | $K_i=K_f$ |
| Inelastic | Conserved if external impulse negligible | Decreases | Some K transforms to other forms |
| Perfectly inelastic | Conserved if external impulse negligible | Decreases | Objects stick and share $v_f$ |
Before: $K_i=24$ J. After: $K_f=18$ J. Momentum is conserved.
The collision is inelastic because total kinetic energy decreased by $6$ J. The missing mechanical energy has transformed into other forms; total energy is still conserved.
Momentum + Energy: Use Them in the Right Stage
Example chain: collision on table → shared horizontal speed from momentum → projectile range from Unit 1 kinematics.
This is why AP questions combine units: recognize where one model stops and another starts.
Equal masses, 1D elastic special insight
If one equal-mass cart is initially at rest and the collision is perfectly elastic in one dimension, the moving cart transfers its speed to the other cart. Treat this as a derived special case—not a universal collision rule.
AP Lab Thinking
Experiment A · verify impulse–momentum
- Use a cart of known mass, force sensor, and motion sensor/photogates.
- Measure velocities immediately before and after a controlled interaction. Photogates report speed magnitudes; assign velocity signs from the observed motion direction. Ensure other horizontal impulses are negligible, or include them.
- Record horizontal force during the interaction; a contact-force sensor measures net horizontal force only when other horizontal forces are negligible.
- Find impulse from signed area under $F(t)$; calculate $\Delta p=m(v_f-v_i)$.
- Compare with uncertainty. Repeat and vary interaction shape.
Powerful conclusion: different force-pulse shapes can have the same area and therefore the same $\Delta p$.
Experiment B · unknown mass from recoil/collision data
- Use known mass $m$ and unknown mass $M$ on a low-friction track.
- Design trials so initial system momentum is known (often zero).
- If a massless internal spring launches them apart with negligible external horizontal impulse, $$m v_m+M v_M=0.$$ Rearrange to a linear form.
- For example, plot $v_m$ vertically against $v_M$ horizontally: slope magnitude $=M/m$ if directions are handled by signs.
AP Transfer Routines
Mathematical Routines
- State momentum/impulse principle.
- Define sign convention.
- Write symbolic relation first.
- Use collision details only after conservation setup.
- Check direction and units.
Translation Between Representations
- Force diagram / collision sketch.
- $F(t)$ area ↔ impulse.
- $p(t)$ slope ↔ net force.
- Momentum bars ↔ algebra.
- Velocity signs ↔ momentum direction.
Experimental Design & Analysis
- Choose measurable velocities/forces/times.
- Control track/friction/system.
- Linearize the momentum relation.
- Use best-fit line, not two chosen points.
- Discuss random/systematic uncertainty.
Qualitative/Quantitative Translation
- Predict before algebra.
- Use Newton III/impulse reasoning.
- Derive relation.
- Check functional dependence.
- State whether derivation supports prediction.
- Using speeds without signs in 1D momentum equations.
- Conserving momentum for a system with significant external impulse.
- Conserving kinetic energy in every collision.
- Confusing force–time area with work.
- Assuming equal momenta imply equal velocities.
- Solving a full 2D simultaneous-unknown problem beyond the AP1 boundary.
Unit 4 · AP Master Sheet
Core relations
| Idea | Relation | Exam meaning |
|---|---|---|
| Momentum | $\vec p=m\vec v$ | vector; direction follows velocity |
| Impulse | $\vec J_{net}=\vec F_{net,avg}\Delta t=\Delta\vec p$ | external impulse changes system momentum |
| $F$–$t$ graph | $J=$ signed area | area gives momentum change |
| $p$–$t$ graph | $F_{net}=$ slope | slope gives net external force |
| System momentum | $\vec p_{tot}=\sum m_i\vec v_i$ | vector sum |
| Center of mass | $\vec v_{cm}=\vec p_{tot}/M$ | constant if net external force is zero |
| Conservation | $\sum\vec p_i=\sum\vec p_f$ | when net external impulse is negligible |
| Elastic test | $K_i=K_f$ | momentum + kinetic energy conserved |
| Perfectly inelastic | shared $v_f$ | stick together; K decreases |
- momentum sign forgotten
- external impulse ignored
- Newton III pair drawn on one FBD
- rebound $\Delta p$ underestimated
- “bounce = elastic” assumption
- momentum and energy stages mixed
- system named?
- positive direction named?
- vector signs consistent?
- units kg·m/s or N·s?
- collision type justified by K, not appearance?
- graph area/slope interpreted correctly?