WONDER — The Mystery
Right Hand → Left Hand?! NIKE → EKIN?!
You stand in front of a mirror and hold up your RIGHT hand. The image seems to show a LEFT hand. You wear a shirt that reads "NIKE" — but the image reads "EKIN" backwards.
Yet your head stays on top, your feet stay on the bottom. Nothing is flipped upside-down!
The Mystery:
Why does a mirror appear to flip left and right but NOT up and down? Is the mirror secretly a left-right reverser, or is something stranger going on?
Today's Mission: Discover the four golden properties of a plane mirror image — virtual, same size, same distance behind, laterally inverted. Build a mirror image with rays, bust the size-change myth, and finally crack the left-right puzzle that fooled the world!
PREDICT — Commit to Your Answer
DOK 2 — PredictScenario: You stand exactly 2 meters in front of a flat (plane) mirror on the wall. Your job is to predict where your image forms.
Where is your image located?
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct Answer: B) 2 m behind the mirror — the image forms the same distance behind the mirror as you are in front.
Did you pick the right WHY? You should have selected: "Image distance = object distance (the image forms the same distance behind the mirror as the object is in front)."
The Simple Truth: A plane mirror makes an image at d_i = d_o. You stand 2 m in front → image is 2 m behind. The total distance between you and your image is 4 m — but the image itself sits at 2 m behind the glass.
PLAY — The Plane Mirror Image Builder
Interactive SimWhat you will DO and OBSERVE
- • DO: Set the object distance (do) and object height (ho) with the sliders, then press Play to watch the light rays travel from the arrow's tip to the mirror and reflect to your eye.
- • OBSERVE: A dashed image arrow forms behind the mirror at the same distance and same height as the object — virtual, not real.
- • DISCOVER: No matter how you change do or ho, the image distance always equals the object distance, and the image height always equals the object height.
Set the object distance and object height, then watch real light rays from the arrow's tip reflect off the mirror to your eye. The brain traces them straight back — and that's where the virtual image appears.
Live Readouts
• do=10, ho=20 → image at 10 cm behind, 20 cm tall. Object close → image close!
• do=100, ho=10 → image at 100 cm behind, 10 cm tall. Object far → image far (but same size)!
• Set do=50 (the AHA spot) → image distance = 50 cm, perfectly equal.
• Notice: the image NEVER changes size when you move the object — only its distance changes!
Record and compare two trials
Keep object height fixed. Record two established trials at different object distances. Compare image distance, image height and the real reflected-ray paths.
The object is illuminated. Two rays enter different points of a finite eye opening; each obeys reflection. Dashed lines behind the mirror are geometric extensions, not travelling light. Distances here are positive magnitudes, so image distance behind = object distance in front; under a real-positive signed mirror convention, dᵢ = −dₒ. The drawing uses 1.3 pixels per cm; energy-marker speed is schematic at 80 pixels per model second. One playback second advances two model seconds; Step advances 0.10 playback seconds.
DISCOVER — The Golden Rules
DOK 1 — RecallYou've built mirror images. Now flip each card to reveal the four golden rules of plane mirror images.
Rule #1
4 Image Properties
Click to flip
4 Properties
- • Same distance behind as object in front
- • Same size as object
- • Virtual (behind mirror, can't project)
- • Laterally inverted (left-right flip)
Rule #2
Virtual vs Real
Click to flip
Virtual vs Real
Virtual: light only APPEARS to come from behind the mirror — it doesn't actually go there.
Real: light actually converges (projectable on a screen).
For a real object in front of a plane mirror, the image is virtual.
Rule #3
Ray Diagram (4 Steps)
Click to flip
4-Step Ray Diagram
- Draw object as upright arrow
- Draw two rays from the tip that hit the mirror; reflect each with i = r. A ray parallel to the mirror does not hit it.
- Extend reflected rays backward (dashed) behind mirror
- Where they meet = image tip
Rule #4
The 2:1 Mirror Rule
Click to flip
Full-Body Mirror
To see your ENTIRE body, the mirror must be at least HALF your height.
Top edge: halfway between your eyes and the top of your head.
Bottom edge: halfway between your eyes and your feet.
All four rules unlocked!
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzePick TRUE or FALSE for each myth. The truth will be revealed instantly.
💀 Myth #1: "The image in a plane mirror is REAL — it actually exists behind the glass."
Correct — the answer is FALSE.
The image is VIRTUAL! Light does not actually converge behind the mirror — it only APPEARS to come from there. If you put a screen behind the mirror, no image forms. The brain traces the reflected rays straight backward and "sees" an image that isn't physically there.
For a real object in front of a plane mirror, a plane mirror produces a virtual image. The virtual image itself cannot be projected directly onto a screen without an additional imaging system.
💀 Myth #2: "Moving closer to the mirror makes your image get smaller (or larger)."
Correct — the answer is FALSE.
The image is ALWAYS the same size as the object — no matter where you stand! Moving closer changes your DISTANCE to the image (the image moves closer too), but its SIZE never changes.
The "grows bigger" illusion is just perspective: a closer image takes up more of your field of view (bigger angular size), but its actual height is identical to your real height. Walk away — your image stays your height, just farther behind the mirror.
Myths destroyed! You're inoculated against the two biggest plane-mirror traps.
THE SECOND 'AHA!' — Instructor Drill
DOK 1–2 — Instructor practiceYour instructor has 4 rapid-fire questions about plane mirrors. The live mirror scene on the left updates as you answer. Get all 4 right to unlock the practice round.
Live Mirror Scene
Current Question Scene
Waiting for Q1...
Instructor Q1 — Minimum Mirror Height
What is the minimum mirror height required to see your full body in a plane mirror?
Instructor Q2 — Image Type
A plane mirror image is:
Instructor Q3 — Image Distance
An object is placed 25 cm in front of a plane mirror. How far behind the mirror is the image?
Instructor Q4 — Full-Body Mirror
You are 170 cm tall. What is the minimum mirror height needed to see your full body?
4/4 — Mirror Mastered!
You now know: di = do, image is virtual & upright, and the 2:1 mirror rule. Time to practice!
7 · PRACTICE — Apply learning independently
Challenge 1: Locate the virtual image
A real object is 42.0 cm in front of a plane mirror. How far behind the mirror does its image appear? Give a positive distance magnitude.
Worked solution — viewing is separate from solving
The image is 42.0 cm behind the mirror. This is a positive distance magnitude; its signed image distance would be −42.0 cm under the real-positive convention.
Challenge 2: Position a full-body mirror
An upright person is 1.76 m tall, with eyes 1.62 m above the floor. A vertical plane mirror has sufficient width. Find the lowest required top edge and highest permissible bottom edge to show the whole body.
Worked solution — viewing is separate from solving
Top edge = (1.76 + 1.62)/2 = 1.69 m. Bottom edge = 1.62/2 = 0.81 m. Their separation is 0.88 m, half the body height; placement matters as well as height.
Challenge 3: Repair a mirror installation
A person is 1.92 m tall with eyes 1.78 m above the floor. A 0.96 m tall vertical mirror of sufficient width is installed from 0.50 m to 1.46 m above the floor. A report says: “Half-height is enough, so the whole body is visible. If the head is missing, moving farther away will fix it.” Keeping the mirror height unchanged, determine the edge heights for full-body viewing, decide whether the report is valid, and justify a repair.
Your explanation is recorded for self-comparison or teacher review; automatic checks only assess the entered results and evidence of effort.
Worked solution — viewing is separate from solving
The report is invalid. Required bottom = 1.78/2 = 0.89 m; top = (1.92 + 1.78)/2 = 1.85 m. Move the mirror upward by 0.39 m, retaining its 0.96 m height. Its present top is too low to show the head. The required edge heights are independent of the person’s distance from a vertical mirror in this geometry, so moving farther away does not repair the placement.
CHALLENGE — Build the Ray Diagram
Explain it simplySequence the Ray Diagram Construction
You must construct a plane-mirror ray diagram to find the image. Click each step in the correct order — first click to select, then click on an empty slot to place it.
Build the diagram in order:
Available steps (shuffled — pick one, then click a slot):
Einstein's Insight — The Left-Right Mirror Paradox
So why does a mirror seem to swap left and right, but NOT up and down? After all, the mirror surface is symmetric — there's nothing "horizontal" about it!
The Physics: A mirror does NOT flip left-right at all! It flips front-back (depth) — the axis perpendicular to its surface.
When you face a mirror, your nose points TOWARD the glass; your image’s nose points in the opposite depth direction, from behind the mirror toward its plane. Every point on you is reflected to the same height, same left-right position — but flipped along the depth axis.
Your right hand is still on the right side of the mirror; it just appears as a "mirror twin" facing you. The conventional left–right comparison imagines turning a person around to face you. That orientation comparison gives lateral inversion; the mirror’s geometric transformation reverses only its perpendicular coordinate.
TEACH — The Feynman Technique
Explain it simplyYour Final Mission:
Your 10-year-old younger sibling is staring at a mirror and asks: "Why does the mirror swap my left hand and my right hand, but it does NOT flip me upside-down? Is the mirror horizontal?"
Explain to your sibling the REAL physics: a mirror does not flip left-right at all. Use the words reflection, mirror, and front-back (or depth).
Type Your Explanation (≥ 3 sentences)
Final reward below
Hidden exam secrets inside — Crest's private notebook.
📓 Crest's Secret Notebook
🪞Mission 14.8 — The Mirror World (Plane Mirrors)
"Right Hand → Left Hand?! NIKE → EKIN?!" 🪞✋
🌍 OVERVIEW: Plane Mirror Images
A plane mirror is a flat reflecting surface. The image it forms has four golden properties — memorize them!
1. The 4 Image Properties (MUST memorize)
- Same distance behind: — the image forms the same distance behind the mirror as the object is in front.
- Same size: — image height equals object height (magnification = 1).
- Virtual: Forms behind the mirror; light only APPEARS to come from there. Cannot be projected on a screen.
- Laterally inverted: Left and right appear swapped (your right hand looks like a left hand). Up-down is NOT flipped.
2. Virtual vs Real Images
| Property | Virtual Image | Real Image |
|---|---|---|
| Light actually converges? | No — only appears to | Yes |
| Can project on screen? | No | Yes |
| Plane mirror? | Virtual for a real object in front | Never |
Key: For a real object in front, a plane mirror produces a virtual, upright, same-size image.
3. Ray Diagram Construction (4 Steps)
- Draw the mirror as a vertical line; hatch the back side.
- Draw the object as an upright arrow at distance in front of the mirror.
- From the arrow tip, draw at least TWO rays to the mirror. Each ray must obey i = r. To draw rays reaching a finite eye opening, join the virtual image to two pupil points; their intersections with the mirror give the required reflection points. Extend the reflected rays backward to locate the virtual image.
- Extend both reflected rays BACKWARD (dashed) behind the mirror until they meet. The meeting point is the image tip. Draw the image arrow there (dashed, same height).
4. The 2:1 Rule — Full-Body Mirror
For an upright body parallel to a correctly positioned vertical mirror of sufficient width, the minimum mirror height is half the body height.
- Top edge: halfway between your eyes and the top of your head.
- Bottom edge: halfway between your eyes and your feet.
- Formula:
Important: This works no matter how far you stand from the mirror! Moving back doesn't change the minimum mirror height.
🚨 THE "CREST" EXAM SECRETS
🔑 EXAM TIP: The "Image Distance" Trap
Exams love to ask: "If you stand 3 m in front of a mirror, how far is your image from YOU?"
- Trap: Students answer 3 m (just ).
- Truth: The image is 3 m BEHIND the mirror. You are 3 m IN FRONT. So distance from you to image = 6 m!
⚠️ COMMON MISTAKE: "Image Gets Smaller"
Students think the image shrinks as they back away.
- WRONG! Image size NEVER changes for a plane mirror — it always equals the object's real size.
- Only the DISTANCE changes (image moves back as you move back). The "smaller" appearance is just perspective (smaller angular size).
⚠️ COMMON MISTAKE: "Real Image Behind Mirror"
Students sometimes say the plane mirror image is "real" because they can see it.
- WRONG! The image is VIRTUAL. You can see it because your eye traces the reflected rays backward, but no screen behind the mirror would catch an image.
🧠 MEMORY TRICK: The 4 Properties Rhyme
- "Same distance, same size, virtual, flipped"
- d_i = d_o (distance), h_i = h_o (size), virtual (behind glass), laterally inverted (left-right).
🧠 MEMORY TRICK: The 2:1 Mirror Rule
- "Half your height, half your sight" — a mirror half your height shows your full body.
- The position DOES matter though: top edge halfway between your eyes and head-top; bottom edge halfway between your eyes and feet.
🪞 BONUS: The Left-Right Paradox Explained
A mirror does NOT flip left-right! It flips front-back (depth) — the axis perpendicular to the mirror surface. Your nose points toward the glass; the image's nose points back at you. The left–right description compares the image with a person turned around to face you; the geometric reflection reverses the perpendicular coordinate. Lie on your side in front of a mirror — your head keeps its world height; a sideways head need not be at the top of the image. The "flip axis" is always perpendicular to the glass!
✅ CREST'S CHECKLIST (memorize!)
- Plane mirror image: same distance behind, same size, virtual, laterally inverted.
- ALWAYS — no halving, no doubling.
- ALWAYS — image size never changes when object moves.
- For a real object in front, plane-mirror images are virtual and upright.
- Distance from object to image = (object in front + image behind).
- Full-body mirror needs only HALF your height (2:1 rule).
- "Left-right flip" is actually a front-back (depth) flip — lateral inversion depends on the orientation used for comparison.
- Ray diagram: draw two incident rays, reflect each using , then extend the reflected rays backward to locate the virtual image.
— Physics Crest ✨
"Same distance, same size, virtual, flipped. Half your height, half your sight."
Mission 14.8 Complete!
You've earned the rank of Master of the Mirror World.
Plane Mirrors — mastered. Every image is now virtual, same-size, same-distance, and you've cracked the left-right paradox!