Skip to lesson
PC

PHYSICS CREST

Global Physics Academy

Mission 12.8 · Wave Transmission and Refraction Reach the Peak of Understanding
Journey Tracker
Progress
0/10
1

WONDER — The Mystery

Same Repeat Rate, Different Spacing and Direction

A periodic wave meeting a stationary linear boundary drives the boundary at the source frequency. Its transmitted speed can differ, so its repeat spacing changes. At oblique incidence, matching phase along the boundary also changes the propagation direction. At normal incidence, spacing can change without bending.

A stationary flat boundaryAngles from the normalSame source repeat ratenormal
Given conditions only; arrows and distances are schematic.

Model: For stationary linear transmission, f₁ = f₂ and λ₂/λ₁ = v₂/v₁. For isotropic plane waves, phase matching gives sinθ₁/v₁ = sinθ₂/v₂. Optical refraction uses n₁ sinθ₁ = n₂ sinθ₂ with v = c/n. Angles are measured from the normal. Boundary reflection depends on impedance and other conditions, not speed alone.

2

PREDICT — Commit to Your Answer

DOK 2 — Predict

A normally incident periodic wave enters a stationary medium where its phase speed halves. What changes?

A stationary flat boundaryAngles from the normalSame source repeat ratenormal
Given conditions only; arrows and distances are schematic.

Commit to both a prediction and a reason before revealing the explanation.

Step 1: Pick your answer.

STOP! Before revealing — why did you pick that?

3

▶ PLAY — Live Moving Wavefront Refraction

DOK 2 — Investigate

Predict, measure and compare

Measure a baseline, change only incidence angle, then change only second-medium speed. Watch moving fronts meet the stationary boundary with matching phase and compare wavelength and direction.

Geometrical phase-front model for ideal isotropic non-dispersive media. Medium 1 speed is 4 m/s. Controls set source frequency, incidence angle from the vertical normal and medium 2 speed. Both media share the same frequency and tangential wave-vector component. Each trial covers two physical seconds played over six real seconds. Spatial scale is 50 pixels/m in both directions; front spacing and arrow angles use this same scale. The model shows steady phase fronts, not a pulse launch, displacement amplitudes, reflected power or absorption. When the speed ratio requires sinθ₂ > 1, no propagating transmitted front is shown; the gold returning ray represents the corresponding optical lossless total-internal-reflection case. Evanescent fields are outside this geometrical model.

Use the labelled readouts.

Status: Ready

Playback: 6 real seconds per run; read elapsed physical model time. Pause or Step for measurements.

Measurements

Elapsed physical time:
Shared frequency:
Medium 1 speed:
Medium 2 speed:
Incident wavelength:
Transmitted wavelength:
Incidence angle:
Transmission angle:

Load givens — then predict and run

Loading a setup earns no trial credit.

4

♢ DISCOVER — Frequency, Spacing, Angle and Conditions

DOK 1 — Recall

Flip all 4 rule cards. Keep the quantities and model conditions clear.

Rule 1

Frequency and wavelength

Click to flip

Frequency and wavelength

A stationary time-independent linear boundary preserves temporal frequency. At the same f, a smaller transmitted speed gives a proportionally smaller wavelength. Moving or time-varying boundaries can require a different treatment.

Rule 2

Direction and the normal

Click to flip

Direction and the normal

For isotropic media, sinθ₁/v₁ = sinθ₂/v₂. Slower transmission bends toward the normal; faster transmission bends away when transmission is possible. At normal incidence both angles remain zero even if wavelength changes.

Rule 3

Reflection is conditional

Click to flip

Reflection is conditional

A boundary may reflect, transmit or absorb. Impedance matching can eliminate reflection; an ideal reflector can eliminate propagating transmission. The same-tension ideal-string coefficients r = (v₂−v₁)/(v₁+v₂) and t = 1+r describe displacement only in that particular model.

∫

Rule 4

Keep the variable and model explicit

Click to flip

Keep the variable and model explicit

String displacement, sound pressure and electromagnetic fields have different reflection conditions. Never infer an acoustic pressure inversion just from string speed ordering. Energy conservation includes reflected, transmitted and absorbed energy where relevant.

Flip all 4 cards to reveal the rules. 0/4 flipped
5

MISCONCEPTION ATTACK — Destroy the Myths

DOK 2 — Analyze

Choose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.

Myth 1: “Every stationary boundary must change the transmitted frequency.”

Myth 2: “Every change in wavelength forces a change in ray direction.”

6

✦ THE SECOND “AHA!” — Boundary Relations and Geometry

DOK 2 — Apply

Use the boundary condition and angle reference.

Progress
0/4
A stationary flat boundaryAngles from the normalSame source repeat ratenormal
Given conditions only; arrows and distances are schematic.

1

Instructor Q1 — Normal Incidence

A wave slows down at normal incidence. Its direction:

2

Instructor Q2 — Reflection Claim

The speed-only reflection coefficient can be used for every sound-pressure and optical boundary:

3

Instructor Q3 — Transmitted Spacing

A stationary transmitted periodic wave has f = 8 Hz and speed 12 m/s. Find wavelength.

Transmitted SpacingShared f: 8 HzTransmitted speed: 12 m/s
Given conditions only; arrows and distances are schematic.
m
4

Instructor Q4 — Source Rate

At a stationary linear boundary the incident frequency is 720 Hz. Find transmitted frequency.

Source RateIncident f: 720 HzStationary linear boundary
Given conditions only; arrows and distances are schematic.
Hz
7

✎ PRACTICE — Independent Boundary Evidence

DOK 1–3 — Practice
DOK 1 — Routine

Challenge 1: An Unseen Transmitted Wave

A periodic source sends a wave through a stationary linear boundary. Source frequency is 600 Hz and transmitted phase speed is 300 m/s. Find transmitted wavelength.

An Unseen Transmitted Wavef: 600 Hz; v₂: 300 m/snormal
Given conditions only; arrows and distances are schematic.
m
DOK 2 — Application

Challenge 2: Light at an Oblique Boundary

Vacuum light of wavelength 600 nm enters a transparent isotropic medium with refractive index √2. Incidence is 45° from the normal. Find the refracted angle and wavelength in the medium.

Light at an Oblique BoundaryVacuum λ: 600 nmIndex: √2; incidence: 45°normal
Given conditions only; arrows and distances are schematic.
°
m
DOK 3 — Audit & Justify

Challenge 3: Audit the Boundary Report

A periodic plane wave travels from speed 6.0 m/s to 3.0 m/s across a stationary linear isotropic boundary. Frequency is 5.0 Hz and incidence is 30° from the normal. Find transmitted wavelength and angle. A report halves frequency, keeps the old wavelength and claims every boundary must reflect simply because it has a speed change. Correct all three claims, and explain what happens to direction at normal incidence.

Audit the Boundary Reportv: 6.0 → 3.0 m/sf: 5.0 Hz; incidence: 30°normal
Given conditions only; arrows and distances are schematic.
m
°

Explanation checks are indicative. Compare your reasoning with the worked solution or your teacher.

8

☷ CHALLENGE — Separate Invariant, Change and Qualification

DOK 2 — Apply

Separate Invariant, Change and Qualification

Select each statement and place it in its matching category. Judge the physical conditions.

0 / 6 correct

9

TEACH — The Feynman Technique

DOK 3 — Teach

Your Final Mission: Explain preserved frequency, changed wavelength and bending from the normal at an oblique stationary boundary. Include normal incidence and qualify claims about reflection, amplitude and energy.

Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.

Type Your Explanation (≥ 3 sentences)

Final reward below

Hidden exam secrets inside — Crest's private notebook.