Skip to lesson
PC

PHYSICS CREST

Global Physics Academy

Mission 12.6 · Wave Speed and Medium Conditions Reach the Peak of Understanding
Journey Tracker
Progress
0/10
1

WONDER — The Mystery

Tightening and Shaking Are Different Changes

A small transverse disturbance on a uniform taut string travels at a speed set by tension and mass per unit length. Shaking faster changes the repeat spacing. Tightening the string changes the propagation speed. Those are different controlled investigations.

A uniform taut stringTension: restoring effectMass/length: inertia
Given conditions only; arrows and distances are schematic.

Model: For small transverse waves on an ideal uniform taut string, v = √(Fₜ/μ), where μ = mass/length. This model neglects bending stiffness, damping, tension changes during motion and dispersion. At fixed Fₜ and μ, speed is independent of source frequency and small amplitude, with λ = v/f. These conclusions are conditional, not universal claims about ocean waves or shocks.

2

PREDICT — Commit to Your Answer

DOK 2 — Predict

On the same ideal taut string, tension and mass per length are unchanged while source frequency doubles. What happens?

A uniform taut stringTension: restoring effectMass/length: inertia
Given conditions only; arrows and distances are schematic.

Commit to both a prediction and a reason before revealing the explanation.

Step 1: Pick your answer.

STOP! Before revealing — why did you pick that?

3

▶ PLAY — Live Taut-String Investigation

DOK 2 — Investigate

Predict, measure and compare

Measure a baseline, quadruple only tension, then double only source frequency. Use a fourth preset to quadruple mass per length. Compare speed and wavelength separately.

An ideal right-moving string pattern has v = √(Fₜ/μ) and λ = v/f. Displacement amplitude is .020 m. Each run covers three physical periods, played over six real seconds; the displayed duration changes when frequency changes. Horizontal scale is 45 pixels/m and vertical displacement is enlarged to 800 pixels/m. The red material point stays at x = 4 m. Positive tension and density avoid singular or slack-string cases outside this model.

Use the labelled readouts.

Status: Ready

Playback: 6 real seconds per run; read elapsed physical model time. Pause or Step for measurements.

Measurements

Physical time:
Tension:
Mass per length:
Wave speed:
Wavelength:
Period:
Local displacement:

Load givens — then predict and run

Loading a setup earns no trial credit.

4

♢ DISCOVER — Medium Model and Square-Root Scaling

DOK 1 — Recall

Flip all 4 rule cards. Keep the quantities and model conditions clear.

Rule 1

String speed

Click to flip

String speed

v = √(Fₜ/μ), with tension Fₜ in N and μ in kg/m. Use μ = m/L for a uniform string. Do not confuse tension Fₜ with period T.

Rule 2

Controlled scaling

Click to flip

Controlled scaling

At fixed μ, quadrupling tension doubles speed; doubling tension gives √2 times speed. At fixed tension, quadrupling μ halves speed. Changing both variables can cancel.

Rule 3

Frequency comparison

Click to flip

Frequency comparison

At fixed tension and μ, changing source frequency does not change speed in this linear non-dispersive model. Wavelength adjusts inversely. Small-amplitude independence is also a model condition.

∫

Rule 4

Limits and different media

Click to flip

Limits and different media

Actual propagation can depend on wave type, stiffness, temperature, frequency and amplitude. Dispersion or nonlinear waves require qualifications. Sound speeds are approximate and condition-dependent; density alone does not rank every material’s sound speed.

Flip all 4 cards to reveal the rules. 0/4 flipped
5

MISCONCEPTION ATTACK — Destroy the Myths

DOK 2 — Analyze

Choose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.

Myth 1: “Quadrupling both tension and mass per length must quadruple speed.”

Myth 2: “Doubling source frequency doubles speed on the unchanged ideal taut string.”

6

✦ THE SECOND “AHA!” — Ratios, Roots and Controlled Changes

DOK 2 — Apply

State which variable stays fixed.

Progress
0/4
A uniform taut stringTension: restoring effectMass/length: inertia
Given conditions only; arrows and distances are schematic.

1

Instructor Q1 — Tension Scaling

At fixed μ, doubling tension makes speed:

2

Instructor Q2 — Density Scaling

At fixed tension, quadrupling μ makes speed:

3

Instructor Q3 — New Speed

An ideal string has tension 9 N and μ = .25 kg/m. Find wave speed.

New SpeedTension: 9 Nμ: .25 kg/m
Given conditions only; arrows and distances are schematic.
m/s
4

Instructor Q4 — New Repeat Spacing

A string wave has speed 12 m/s and frequency 6 Hz. Find wavelength.

New Repeat SpacingSpeed: 12 m/sFrequency: 6 Hz
Given conditions only; arrows and distances are schematic.
m
7

✎ PRACTICE — Independent String-Speed Evidence

DOK 1–3 — Practice
DOK 1 — Routine

Challenge 1: An Unseen String

A uniform ideal taut string has tension 18 N and mass per length .080 kg/m. Find its small-wave speed.

An Unseen StringTension: 18 Nμ: .080 kg/m
Given conditions only; arrows and distances are schematic.
m/s
DOK 2 — Application

Challenge 2: Measure the String First

A uniform 3.00 m string has mass .090 kg and tension 12.0 N. Its source frequency is 25.0 Hz. Find mass per length, propagation speed and wavelength.

Measure the String FirstLength: 3.00 mMass: .090 kgTension: 12 N; f: 25 Hz
Given conditions only; arrows and distances are schematic.
kg/m
m/s
m
DOK 3 — Audit & Justify

Challenge 3: Audit a Confounded Experiment

Run A uses tension 25 N, μ = .25 kg/m and frequency 4 Hz. Run B uses tension 100 N, μ = 1.00 kg/m and frequency 10 Hz. Find run B speed and wavelength. A report says tension alone has doubled speed, keeps run A wavelength, and calls this a controlled test of tension. Evaluate all three claims and propose a fair comparison.

Audit a Confounded ExperimentA: 25 N, .25 kg/mB: 100 N, 1.00 kg/mSource f: 4 → 10 Hz
Given conditions only; arrows and distances are schematic.
m/s
m

Explanation checks are indicative. Compare your reasoning with the worked solution or your teacher.

8

☷ CHALLENGE — Classify the Comparison

DOK 2 — Apply

Classify the Comparison

Select each statement and place it in its matching category. Judge the physical conditions.

0 / 6 correct

9

TEACH — The Feynman Technique

DOK 3 — Teach

Your Final Mission: Explain how tension and mass per length set speed in the ideal string model. Distinguish changing the source from changing medium conditions, describe square-root scaling and state the model limits.

Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.

Type Your Explanation (≥ 3 sentences)

Final reward below

Hidden exam secrets inside — Crest's private notebook.