WONDER — The Mystery
A Bigger Amplitude Needs a Controlled Comparison
A wave transfers energy; power tells how quickly, and intensity tells power per area. Comparable linear waves often have intensity proportional to an amplitude squared. State the amplitude type and what stays fixed. This rule does not turn wave height into an exact prediction of tsunami damage or make perceived loudness a direct amplitude meter.
Model: Average intensity I is average power P divided by cross-sectional area S normal to propagation. For comparable linear waves at fixed frequency and medium, I ∝ A². Energy transferred in time Δt is PΔt. For the labelled plane-sound extension, displacement amplitude A gives I = ½ρc(2πf)²A²; pressure amplitude p₀ gives I = p₀²/(2ρc). Which amplitude is fixed matters.
PREDICT — Commit to Your Answer
DOK 2 — PredictTwo linear wave beams have the same frequency, medium and cross-sectional area. Displacement amplitude doubles. What happens to average intensity?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
The matched comparison gives I₂/I₁ = (A₂/A₁)² = 4. Equal area also makes total power quadruple.
▶ PLAY — Live Longitudinal Motion and Energy Flux
DOK 2 — InvestigatePredict, measure and compare
Measure a baseline, double only displacement amplitude, then double only frequency. Compare a beam-area-only preset to separate total power from local intensity.
This labelled extension uses a linear plane sound wave in a uniform non-dispersive medium with density 1.20 kg/m³ and speed 343 m/s. Displacement is ξ = A cos(kx−ωt); material velocity is its time derivative, pressure perturbation is ρc times that velocity, and instantaneous acoustic energy flux is pressure perturbation times material velocity. Mean intensity averages that flux over a cycle. The uniform beam has cross-sectional area S; total average power is IS. A run covers .008 physical seconds over six real seconds. Dots oscillate longitudinally, with displacement enlarged to 500000 pixels/m; the moving curve is pressure, not a transverse shape of air. The horizontal spatial scale is 360 pixels over 1.372 m, pressure uses 4 pixels/Pa, and the signed material-velocity arrow uses 5000 pixels/(m/s). The intensity bar has the same 0–.320 W/m² scale for every trial. There is no absorption, spreading or reflected wave in this plane-wave model.
Status: Ready
Playback: 6 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Square Law with Quantities and Conditions
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Energy, power and intensity
Click to flip
Energy, power and intensity
Energy E is measured in J; power P is energy transferred per time in W; average intensity I is average P/S in W/m², with S normal to propagation. For a uniform beam, energy transferred over a steady interval is E = ISΔt. Doubling beam area at fixed intensity doubles total power, not local intensity.
Rule 2
Specify the amplitude
Click to flip
Specify the amplitude
For comparable linear waves at fixed frequency and medium, intensity scales as the square of the specified amplitude. Use I₂/I₁ = (A₂/A₁)² and take a positive square root for an amplitude magnitude. The plane-sound extension gives I = ½ρcω²A² for displacement amplitude and I = p₀²/(2ρc) for pressure amplitude. Changing frequency at fixed displacement amplitude differs from changing it at fixed pressure amplitude.
Rule 3
Spreading and absorption
Click to flip
Spreading and absorption
A steady isotropic point source without absorption has I = P/(4πr²), so amplitude at fixed frequency and medium scales as 1/r. Geometric spreading reduces intensity without reducing total outward power. Absorption reduces outward wave power by transferring energy into the material; it does not destroy total energy. A non-spreading ideal plane wave does not lose amplitude merely because it travels farther.
Rule 4
Limits of a simple claim
Click to flip
Limits of a simple claim
The sound displacement formula is a model-specific extension, not a universal E ∝ A²f² law. Electromagnetic intensity at fixed medium scales with electric-field amplitude squared, without this explicit mechanical f² factor. Perceived loudness differs from pressure amplitude or intensity. Actual storm or tsunami damage depends on flow, geometry and structures, so no exact square-law damage multiplier follows from wave height alone.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “Doubling a wave’s amplitude always doubles its intensity.”
Correct — the claim is false.
False. Comparable linear waves with the other relevant factors fixed give four times intensity. Different frequencies, media or amplitude definitions require an appropriate model.
Myth 2: “Doubling tsunami height guarantees exactly four times the damage.”
Correct — the claim is false.
False. A linear-wave energy comparison does not determine a damage multiplier; flows, coastal geometry, duration and structures also matter.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Intensity and Controlled Ratios
DOK 2 — ApplyUse power per area and square-law comparisons only under the stated conditions.
Instructor Q1 — Amplitude Change
Same-frequency linear waves in the same medium have an amplitude ratio of 3. Their intensity ratio is:
Instructor Q2 — Area Change
A uniform beam keeps the same intensity while its cross-sectional area doubles. Its total power:
Instructor Q3 — Power per Area
A uniform beam carries average power .0240 W through area .00600 m². Find average intensity.
Instructor Q4 — An Intensity Ratio
Two linear waves have the same frequency and medium. Amplitude falls from .00400 m to .00100 m. Find the intensity ratio (new/old).
4/4 — Instructor Questions Completed
Specify energy, power or intensity, identify the amplitude, and state the fixed conditions before using a ratio.
✎ PRACTICE — Independent Intensity and Power Audits
DOK 1–3 — PracticeChallenge 1: A Fresh Beam
A uniform beam carries average power .000184 W through cross-sectional area .0800 m² normal to propagation. Find average intensity.
Step-by-Step Solution
I = P/S = .000184/.0800 = .00230 W/m².
Challenge 2: Amplitude, Area and Time
A linear wave beam has intensity .0640 W/m² at displacement amplitude .00300 m. Keeping frequency and medium fixed, amplitude becomes .00450 m. The new uniform beam crosses .0250 m² for 8.50 s. Find its intensity and total energy transferred in that time.
Step-by-Step Solution
Amplitude ratio = 1.5, so I = .0640×1.5² = .144 W/m². Power = .144×.0250 = .00360 W; transferred energy = .00360×8.50 = .0306 J.
Challenge 3: Separate Spreading from Absorption
A steady isotropic emitter gives intensity .0160 W/m² at radius 3.00 m. At 6.00 m, uniform absorption between the two spherical surfaces leaves measured intensity .00100 W/m². Frequency and medium are unchanged. Find the intensity expected at 6.00 m with spreading alone, the fraction of total outward power remaining relative to the 3.00 m surface, and amplitude ratio at 6.00 m versus 3.00 m. A report says intensity varies as 1/r, an amplitude ratio equals the intensity ratio, absorption destroys energy, and any frequency change always multiplies light intensity by f² at fixed electric-field amplitude. Correct all four claims.
Explanation checks are indicative. Compare your reasoning with the worked solution or your teacher.
Step-by-Step Solution
Spreading alone gives .0160×(3/6)² = .00400 W/m². Outward power ratio is [4π6²×.00100]/[4π3²×.0160] = .250. The amplitude ratio is √(.00100/.0160) = .250; the local intensity ratio is .0625. Intensity follows inverse square distance for the specified lossless isotropic model; absorption transfers energy into the medium. The mechanical displacement formula’s explicit f² factor is not a universal light rule at fixed electric-field amplitude.
☷ CHALLENGE — Classify the Wave-Energy Claim
DOK 2 — ApplyClassify the Wave-Energy Claim
Select each statement and place it in its matching category. Judge the physical conditions.
0 / 6 correct
Physics Insight
Specify energy, power or intensity, identify the amplitude, and state the fixed conditions before using a ratio.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain the differences between energy, power and intensity; explain a controlled square-law comparison and distinguish spreading from absorption. State why the amplitude type and fixed conditions matter.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 12.16 — Wave Energy, Power and Intensity
Reach the Peak of Understanding
1. Energy, power and intensity
Energy E is measured in J; power P is energy transferred per time in W; average intensity I is average P/S in W/m², with S normal to propagation. For a uniform beam, energy transferred over a steady interval is E = ISΔt. Doubling beam area at fixed intensity doubles total power, not local intensity.
2. Specify the amplitude
For comparable linear waves at fixed frequency and medium, intensity scales as the square of the specified amplitude. Use I₂/I₁ = (A₂/A₁)² and take a positive square root for an amplitude magnitude. The plane-sound extension gives I = ½ρcω²A² for displacement amplitude and I = p₀²/(2ρc) for pressure amplitude. Changing frequency at fixed displacement amplitude differs from changing it at fixed pressure amplitude.
3. Spreading and absorption
A steady isotropic point source without absorption has I = P/(4πr²), so amplitude at fixed frequency and medium scales as 1/r. Geometric spreading reduces intensity without reducing total outward power. Absorption reduces outward wave power by transferring energy into the material; it does not destroy total energy. A non-spreading ideal plane wave does not lose amplitude merely because it travels farther.
4. Limits of a simple claim
The sound displacement formula is a model-specific extension, not a universal E ∝ A²f² law. Electromagnetic intensity at fixed medium scales with electric-field amplitude squared, without this explicit mechanical f² factor. Perceived loudness differs from pressure amplitude or intensity. Actual storm or tsunami damage depends on flow, geometry and structures, so no exact square-law damage multiplier follows from wave height alone.
Worked independent practice
C1: .00230 W/m². C2: .144 W/m² and .0306 J. C3: .00400 W/m² with spreading alone, .250 outward power fraction and .250 amplitude ratio; measured local intensity ratio is .0625.
Live investigation and access
This labelled extension uses a linear plane sound wave in a uniform non-dispersive medium with density 1.20 kg/m³ and speed 343 m/s. Displacement is ξ = A cos(kx−ωt); material velocity is its time derivative, pressure perturbation is ρc times that velocity, and instantaneous acoustic energy flux is pressure perturbation times material velocity. Mean intensity averages that flux over a cycle. The uniform beam has cross-sectional area S; total average power is IS. A run covers .008 physical seconds over six real seconds. Dots oscillate longitudinally, with displacement enlarged to 500000 pixels/m; the moving curve is pressure, not a transverse shape of air. The horizontal spatial scale is 360 pixels over 1.372 m, pressure uses 4 pixels/Pa, and the signed material-velocity arrow uses 5000 pixels/(m/s). The intensity bar has the same 0–.320 W/m² scale for every trial. There is no absorption, spreading or reflected wave in this plane-wave model.
Run, Pause, Step and Reset work offline. Complete three matched measurements. Loading a preset is not completing a trial. Saved progress resumes paused. Reduced-motion Run gives a final snapshot; Step allows deliberate inspection. Hints and solutions require a genuine unsuccessful numerical attempt and never complete a task. Explanation rubrics are indicative; compare your physics with the solution or a teacher. Teaching submission checks effort rather than certifying scientific accuracy.
Course scope
AS Level 9702 7.1 includes intensity as power per unit area and intensity proportional to amplitude squared. AP Physics 2 14.3.A.3 defines period-averaged intensity. Detailed plane-sound displacement, pressure and flux formulas are labelled extension; they are checked against OpenStax University Physics Volume 1, section 17.3 (https://openstax.org/books/university-physics-volume-1/pages/17-3-sound-intensity).
Sources: Cambridge International 9702 syllabus ; College Board AP Physics 1 and AP Physics 2 CEDs, as mapped above. Detailed extension models are labelled in the mission.
✓ Crest’s Checklist
- I distinguish J, W and W/m².
- I state the amplitude type and fixed conditions.
- I use the correct surface area for spreading.
- I distinguish absorption from geometric spreading.
- I avoid universal damage or loudness multipliers.
— Crest ☆ “Reach the Peak of Understanding”
Mission 12.16 Complete! · All 10 levels cleared · PHYSICS CREST
★ Wave Energy, Power and Intensity Investigator
Specify energy, power or intensity, identify the amplitude, and state the fixed conditions before using a ratio.