WONDER — The Mystery
Stopping Does Not Mean Having No Energy
An ideal oscillator stops momentarily at each turning point while storing maximum oscillation potential energy. At equilibrium it has maximum speed. Between these positions the two forms add to a constant. The halfway displacement is not the equal-energy position: energy depends on displacement squared.
Model: For a horizontal ideal spring, x is displacement from equilibrium and K = ½mv², U = ½kx², E = ½kA². U is chosen zero at equilibrium. For a vertical spring, this same oscillation potential describes the combined spring and gravitational energy relative to its equilibrium value, not the raw elastic energy alone. For an ideal pendulum, gravitational energy above the lowest point is mgL(1−cosθ).
PREDICT — Commit to Your Answer
DOK 2 — PredictA horizontal ideal spring oscillator is at x = A/2. What fraction of its total energy is potential?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
U/E = x²/A² = 1/4. The remaining 3/4 is kinetic energy.
▶ PLAY — Live Motion and Energy on One Fixed Scale
DOK 2 — InvestigatePredict, measure and compare
Measure a baseline, double only amplitude, then double only stiffness. Keep the energy bar scale fixed across trials. Compare a mass-only preset to see energy stay fixed while speed and period change.
A horizontal frictionless ideal mass–spring is released from x = +A with zero speed. Motion uses x = A cos(√(k/m)t), with velocity from the derivative. Kinetic and spring potential energies are computed from their actual motion values and added. Each run covers four physical seconds over six real seconds. Position uses 1800 pixels/m and the signed velocity arrow uses 90 pixels/(m/s). All three energy bars share the fixed 0–0.040 J scale for every preset, so an amplitude change shows a real change in energy. Zero amplitude is stationary equilibrium; its natural period is a parameter rather than a measured cycle.
Status: Ready
Playback: 6 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Energy, Position, Reference and Loss
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Conservation and reference
Click to flip
Conservation and reference
For an undamped, undriven ideal horizontal spring, E = K + U = ½kA², K = ½mv² and U = ½kx². Choose U = 0 at equilibrium. At the turning points K = 0 and U = E; at equilibrium U = 0 and K = E. A different potential zero adds a constant without changing motion.
Rule 2
Equal-energy positions
Click to flip
Equal-energy positions
For SHM, U/E = (x/A)². At x = ±A/2, U = E/4 and K = 3E/4. Equal energies occur at x = ±A/√2. From release at +A, the first equality is after T/8; after T/4 the oscillator is at equilibrium and all oscillation energy is kinetic. There are four equal-energy instants per cycle.
Rule 3
Vertical springs and pendulums
Click to flip
Vertical springs and pendulums
A vertical spring has equilibrium extension mg/k. With x measured from that equilibrium, combined spring and gravitational potential relative to equilibrium is ½kx². Its raw elastic energy ½k(extension)² is generally nonzero at equilibrium. An ideal pendulum has U = mgh = mgL(1−cosθ); equality with K occurs at half its maximum height above the bottom, not generally half its angle.
Rule 4
Amplitude and damping
Click to flip
Amplitude and damping
At fixed k, total SHM energy scales as A². Halving amplitude reduces oscillation energy to one quarter. At fixed k and A, changing mass changes period and maximum speed but not total energy. Damping transfers mechanical energy into other forms such as internal energy; total energy is conserved when the surroundings and transfers are included.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “Halfway from equilibrium to a turning point, kinetic and potential energy are equal.”
Correct — the claim is false.
False. For SHM, x = A/2 gives potential energy E/4 and kinetic energy 3E/4. Equality occurs at |x| = A/√2.
Myth 2: “At the equilibrium of a hanging vertical spring, its raw elastic potential energy is always zero.”
Correct — the claim is false.
False. The spring is extended by mg/k. The combined spring and gravitational oscillation potential can be chosen zero at equilibrium, but raw elastic energy is nonzero there.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Conservation and the Squared Displacement
DOK 2 — ApplyState which potential-energy reference and physical system you use.
Instructor Q1 — Turning Point
At a horizontal ideal spring turning point, which is zero?
Instructor Q2 — Half Displacement
At x = A/2 in a horizontal ideal spring, the kinetic fraction is:
Instructor Q3 — New Energy
A horizontal ideal spring has k = 20.0 N/m and amplitude .0300 m. Find total oscillation energy.
Instructor Q4 — Energy at a Position
A horizontal ideal spring has k = 20.0 N/m, A = .0300 m and current x = .0180 m. Find kinetic energy.
4/4 — Instructor Questions Completed
Equal halves of energy require a squared-displacement comparison, and potential-energy zero is a chosen reference.
✎ PRACTICE — Independent Energy Calculations and Audit
DOK 1–3 — PracticeChallenge 1: A Fresh Stored Energy
A horizontal ideal spring has stiffness 46.0 N/m and amplitude .0100 m. Find its total oscillation energy.
Step-by-Step Solution
E = ½kA² = ½×46.0×.0100² = .00230 J.
Challenge 2: Energy and Speed Away from Equilibrium
A .180 kg mass oscillates on a horizontal ideal spring of stiffness 32.0 N/m with amplitude .0750 m. At displacement +.0450 m from equilibrium, find kinetic energy and speed.
Step-by-Step Solution
E = .0900 J; U = .0324 J; K = .0576 J. Speed = √(2K/m) = .800 m/s. Direction is not determined by displacement alone.
Challenge 3: Audit a Hanging Spring Report
A .250 kg mass oscillates vertically on an ideal spring of stiffness 50.0 N/m in gravity 9.80 m/s². Its amplitude about the hanging equilibrium is .0400 m. At x = +.0200 m relative to that equilibrium, find kinetic energy. Also find the displacement magnitude at which kinetic and oscillation potential energies are equal. A report calls the hanging equilibrium the natural length, sets its raw elastic energy to zero, says x = A/2 gives equal energies and says damping that halves amplitude halves oscillation energy. Correct all four claims, including where damping transfers energy.
Explanation checks are indicative. Compare your reasoning with the worked solution or your teacher.
Step-by-Step Solution
Equilibrium extension = mg/k = .0490 m, so it is not the natural length. Combined spring and gravitational potential relative to equilibrium is U = ½kx² = .0100 J; E = .0400 J and K = .0300 J. Equal energies require |x| = A/√2 = .0282843 m. Raw elastic energy at equilibrium is ½k(.0490)² = .060025 J, not zero. Halving amplitude gives one quarter of the oscillation energy; damping transfers the remainder to the surroundings, usually as internal/thermal energy.
☷ CHALLENGE — Match Energy Statements to Their Conditions
DOK 2 — ApplyMatch Energy Statements to Their Conditions
Select each statement and place it in its matching category. Judge the physical conditions.
0 / 6 correct
Physics Insight
Equal halves of energy require a squared-displacement comparison, and potential-energy zero is a chosen reference.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain how an ideal oscillator exchanges kinetic and potential energy, where the equal-energy positions occur, why the potential zero matters for a vertical spring and how damping changes mechanical energy.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 12.15 — Energy in Simple Harmonic Motion
Reach the Peak of Understanding
1. Conservation and reference
For an undamped, undriven ideal horizontal spring, E = K + U = ½kA², K = ½mv² and U = ½kx². Choose U = 0 at equilibrium. At the turning points K = 0 and U = E; at equilibrium U = 0 and K = E. A different potential zero adds a constant without changing motion.
2. Equal-energy positions
For SHM, U/E = (x/A)². At x = ±A/2, U = E/4 and K = 3E/4. Equal energies occur at x = ±A/√2. From release at +A, the first equality is after T/8; after T/4 the oscillator is at equilibrium and all oscillation energy is kinetic. There are four equal-energy instants per cycle.
3. Vertical springs and pendulums
A vertical spring has equilibrium extension mg/k. With x measured from that equilibrium, combined spring and gravitational potential relative to equilibrium is ½kx². Its raw elastic energy ½k(extension)² is generally nonzero at equilibrium. An ideal pendulum has U = mgh = mgL(1−cosθ); equality with K occurs at half its maximum height above the bottom, not generally half its angle.
4. Amplitude and damping
At fixed k, total SHM energy scales as A². Halving amplitude reduces oscillation energy to one quarter. At fixed k and A, changing mass changes period and maximum speed but not total energy. Damping transfers mechanical energy into other forms such as internal energy; total energy is conserved when the surroundings and transfers are included.
Worked independent practice
C1: .00230 J. C2: .0576 J and speed .800 m/s. C3: kinetic .0300 J and equal-energy |x| = .0282843 m; hanging equilibrium is .0490 m beyond natural length. Halving amplitude quarters energy.
Live investigation and access
A horizontal frictionless ideal mass–spring is released from x = +A with zero speed. Motion uses x = A cos(√(k/m)t), with velocity from the derivative. Kinetic and spring potential energies are computed from their actual motion values and added. Each run covers four physical seconds over six real seconds. Position uses 1800 pixels/m and the signed velocity arrow uses 90 pixels/(m/s). All three energy bars share the fixed 0–0.040 J scale for every preset, so an amplitude change shows a real change in energy. Zero amplitude is stationary equilibrium; its natural period is a parameter rather than a measured cycle.
Run, Pause, Step and Reset work offline. Complete three matched measurements. Loading a preset is not completing a trial. Saved progress resumes paused. Reduced-motion Run gives a final snapshot; Step allows deliberate inspection. Hints and solutions require a genuine unsuccessful numerical attempt and never complete a task. Explanation rubrics are indicative; compare your physics with the solution or a teacher. Teaching submission checks effort rather than certifying scientific accuracy.
Course scope
A Level 9702 17.2 and AP Physics 1 7.4 cover energy in SHM. The exact pendulum energy and vertical-spring reference explanation clarify assumptions; no nonlinear period calculation is required.
Sources: Cambridge International 9702 syllabus ; College Board AP Physics 1 and AP Physics 2 CEDs, as mapped above. Detailed extension models are labelled in the mission.
✓ Crest’s Checklist
- I add energies with one consistent reference.
- I square displacement and amplitude.
- I distinguish vertical equilibrium from natural length.
- I use A/√2 for equal SHM energies.
- I include the surroundings when describing damping.
— Crest ☆ “Reach the Peak of Understanding”
Mission 12.15 Complete! · All 10 levels cleared · PHYSICS CREST
★ Energy in Simple Harmonic Motion Investigator
Equal halves of energy require a squared-displacement comparison, and potential-energy zero is a chosen reference.