Skip to lesson
PC

PHYSICS CREST

Global Physics Academy

Mission 12.13 · Mass–Spring Simple Harmonic Motion Reach the Peak of Understanding
Journey Tracker
Progress
0/10
1

WONDER — The Mystery

Restoring Force Is Measured from Equilibrium

A heavier mass on the same ideal spring has a longer period; a stiffer spring at fixed mass has a shorter period. For a vertical spring, gravity shifts the equilibrium extension. The net restoring force about that equilibrium still gives the same ideal period formula.

An ideal linear oscillatorMass: inertiaStiffness: restoring effect
Given conditions only; arrows and distances are schematic.

Model: For an ideal massless Hooke-law spring and a mass moving without damping, m ẍ = −kx when x is measured from equilibrium. Thus ω = √(k/m), T = 2π√(m/k) and x = A cos(ωt+φ). A vertical spring’s raw force depends on extension from natural length; its net force about equilibrium is −kx after gravity is included.

2

PREDICT — Commit to Your Answer

DOK 2 — Predict

Mass is quadrupled while stiffness stays fixed in the ideal linear spring model. The period becomes:

An ideal linear oscillatorMass: inertiaStiffness: restoring effect
Given conditions only; arrows and distances are schematic.

Commit to both a prediction and a reason before revealing the explanation.

Step 1: Pick your answer.

STOP! Before revealing — why did you pick that?

3

▶ PLAY — Live Mass–Spring Motion, Force and Energy

DOK 2 — Investigate

Predict, measure and compare

Measure a baseline, quadruple only mass, then quadruple only stiffness. Use another preset to change amplitude and compare displacement, velocity and energy while keeping period fixed.

Horizontal ideal mass–spring oscillator released from x = +A with zero initial velocity. The spring is massless and linear in both extension and compression, and motion is frictionless. The block moves with x = A cos(√(k/m)t), with force −kx and velocity obtained from its time derivative. Each run spans four physical seconds over six real seconds, so comparisons share the same time scale. Displacement is enlarged to 1800 pixels/m; force arrows use 70 pixels/N and velocity arrows 90 pixels/(m/s). The energy strip shows ½kx² and ½mv² relative to constant total ½kA². Zero amplitude gives stationary equilibrium rather than a measured oscillation.

Use the labelled readouts.

Status: Ready

Playback: 6 real seconds per run; read elapsed physical model time. Pause or Step for measurements.

Measurements

Physical time:
Natural period:
Natural frequency:
Displacement from equilibrium:
Signed velocity:
Net restoring force:
Signed acceleration:
Kinetic energy:
Oscillation potential energy:
Total mechanical energy:

Load givens — then predict and run

Loading a setup earns no trial credit.

4

♢ DISCOVER — Linear Force, Scaling and Equilibrium

DOK 1 — Recall

Flip all 4 rule cards. Keep the quantities and model conditions clear.

Rule 1

SHM condition

Click to flip

SHM condition

Net force F = −kx gives acceleration a = −(k/m)x = −ω²x. The minus sign means force and acceleration oppose displacement from equilibrium; they do not always oppose velocity.

Rule 2

Period and scaling

Click to flip

Period and scaling

T = 2π√(m/k), f = 1/T and ω = √(k/m). At fixed k, quadrupling mass doubles period. At fixed m, quadrupling stiffness halves period. Simultaneous changes require the ratio m/k.

Rule 3

Gravity and amplitude conditions

Click to flip

Gravity and amplitude conditions

For a vertical ideal spring, equilibrium extension is mg/k. Uniform gravity shifts equilibrium but does not enter the small linear oscillation period at unchanged m and k. Ideal Hooke-law amplitude independence fails if the spring is nonlinear, slack, massive in a significant way or damped.

∫

Rule 4

Energy and maximum speed

Click to flip

Energy and maximum speed

For the horizontal ideal oscillator, E = ½kA², U = ½kx² and K = ½mv². Maximum speed is ωA at equilibrium; speed is zero at the extremes. For a vertical system, ½kx² about equilibrium is the effective oscillation potential including gravitational effects, not the raw spring elastic energy alone.

Flip all 4 cards to reveal the rules. 0/4 flipped
5

MISCONCEPTION ATTACK — Destroy the Myths

DOK 2 — Analyze

Choose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.

Myth 1: “The restoring force always opposes velocity.”

Myth 2: “A negative displacement gives a negative potential energy ½kx².”

6

✦ THE SECOND “AHA!” — Square Roots and Signed Force

DOK 2 — Apply

Treat mass, stiffness and equilibrium separately.

Progress
0/4
An ideal linear oscillatorMass: inertiaStiffness: restoring effect
Given conditions only; arrows and distances are schematic.

1

Instructor Q1 — Stiffness Scaling

Doubling stiffness at fixed mass gives period factor:

2

Instructor Q2 — Vertical Reference

For the vertical ideal system, x in net F = −kx is measured from:

3

Instructor Q3 — Period

An ideal oscillator has mass .25 kg and stiffness 25 N/m. Find period.

PeriodMass: .25 kgStiffness: 25 N/m
Given conditions only; arrows and distances are schematic.
s
4

Instructor Q4 — Restoring Force

Stiffness is 30 N/m and displacement from equilibrium is +.010 m. Find net restoring force.

Restoring ForceStiffness: 30 N/mDisplacement: +.010 m
Given conditions only; arrows and distances are schematic.
N
7

✎ PRACTICE — Independent Spring-Model Audits

DOK 1–3 — Practice
DOK 1 — Routine

Challenge 1: A New Spring Period

An ideal mass–spring oscillator has mass .360 kg and stiffness 9.00 N/m. Find its period.

A New Spring Periodm: .360 kg; k: 9.00 N/m
Given conditions only; arrows and distances are schematic.
s
DOK 2 — Application

Challenge 2: Vertical Equilibrium and Release

A .200 kg mass hangs on an ideal spring of stiffness 50.0 N/m in gravity 9.81 m/s². Take downward as positive. Find equilibrium extension from natural length, period, and initial acceleration after release from rest .0300 m below equilibrium.

Vertical Equilibrium and Releasem: .200 kg; k: 50 N/mg: 9.81 m/s²; x: +.030 m
Given conditions only; arrows and distances are schematic.
m
s
m/s²
DOK 3 — Audit & Justify

Challenge 3: Audit Simultaneous Changes

An ideal vertical oscillator changes from m = .240 kg, k = 24.0 N/m to m = 2.16 kg, k = 96.0 N/m. Gravity changes from 9.81 to 1.62 m/s². For a displacement +.0200 m downward from the new equilibrium, find the period ratio (new/old), new period and net restoring force. A report makes period depend directly on gravity and uses displacement from natural length as x in net F = −kx. Correct both claims and state the linear-spring condition.

Audit Simultaneous Changesm: .240 → 2.16 kgk: 24 → 96 N/mNew x: +.0200 m
Given conditions only; arrows and distances are schematic.
s
N

Explanation checks are indicative. Compare your reasoning with the worked solution or your teacher.

8

☷ CHALLENGE — Classify a Controlled Change

DOK 2 — Apply

Classify a Controlled Change

Select each statement and place it in its matching category. Judge the physical conditions.

0 / 6 correct

9

TEACH — The Feynman Technique

DOK 3 — Teach

Your Final Mission: Explain why inertia and stiffness give opposite square-root period changes. Describe restoring-force direction, vertical equilibrium, amplitude independence under ideal conditions and kinetic/potential energy exchange.

Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.

Type Your Explanation (≥ 3 sentences)

Final reward below

Hidden exam secrets inside — Crest's private notebook.