Skip to lesson
PC

PHYSICS CREST

Global Physics Academy

Mission 11.6 · Magnetic Field of a Straight Wire Reach the Peak of Understanding
Journey Tracker
Progress
0/10
1

WONDER — The Mystery

Circles Around a Straight Current

A straight wire carries current, yet the magnetic field does not run along it. A compass placed in the plane perpendicular to the wire turns tangentially to a circle around the axis. What determines its direction and the field magnitude?

Long straight wireI is conventional currentr is axis-to-probe distanceNS
Given conditions only; arrows and distances are schematic.

Model: Outside an ideal long straight wire in vacuum, B = μ₀|I|/(2πr). The direction is tangent to circles centered on the wire and follows the right-hand grip rule. Distances are perpendicular distances from the axis. A compass aligns with the total field in its allowed plane of rotation.

2

PREDICT — Commit to Your Answer

DOK 2 — Predict

A long wire carries current out of the page. At a probe directly to its right, what direction is the wire’s magnetic field?

Long straight wireI is conventional currentr is axis-to-probe distanceNS
Given conditions only; arrows and distances are schematic.

Commit to both a prediction and a reason before revealing the explanation.

Step 1: Pick your answer.

STOP! Before revealing — why did you pick that?

3

▶ PLAY — A Compass in the Wire’s Cross-Section

DOK 2 — Investigate

Predict, measure and compare

Compare two currents at one probe distance, then change distance at one current. Run the settling compass and compare signed tangential fields. Include a reversed-current check.

The wire is perpendicular to the screen, with signed conventional current I positive out of the page. Its radius is much smaller than the probe distance, and nearby ends, return wires and external fields are neglected. At the right-hand probe, By = 2×10⁻⁷ I/r T. A freely turning model compass starts along +x and obeys an overdamped torque response dα/dt = 100000|B| sin(αfield − α), with time in seconds and B in teslas. The damping constant is a chosen illustrative compass parameter. Field lines are stationary directions, not moving material. Only the needle moves. Six model seconds play over six real seconds. Drawn distances are schematic.

Use the labelled readouts.

Status: Ready

Playback: 6 real seconds per run; read elapsed physical model time. Pause or Step for measurements.

Measurements

Model time:
Signed By at probe:
Field magnitude:
Needle angle from +x:

Load givens — then predict and run

Loading a setup earns no trial credit.

4

♢ DISCOVER — Shape, Direction, Magnitude and Scope

DOK 1 — Recall

Flip all 4 rule cards. Keep the quantities and model conditions clear.

Rule 1

A specified viewpoint

Click to flip

A specified viewpoint

Viewed with current coming toward you, the field circles counterclockwise. With current away, it circles clockwise. “Current up means counterclockwise” is incomplete without a viewing direction.

Rule 2

Magnitude outside a long wire

Click to flip

Magnitude outside a long wire

B = μ₀|I|/(2πr), with μ₀ ≈ 4π×10⁻⁷ T m/A for school calculations. Use amperes and meters. The model assumes an effectively long wire and free space; it is not valid at the central axis.

Rule 3

Scaling with controls

Click to flip

Scaling with controls

At fixed r, magnitude is proportional to |I|. At fixed I it is inversely proportional to r. Doubling both gives the same magnitude. Current reversal reverses the field direction.

∫

Rule 4

A real compass

Click to flip

A real compass

A compass needle responds to total local magnetic field and its mounting constrains motion. A horizontal compass cannot simply point through its dial into a page. In this model the screen is the transverse plane and the needle can turn within that plane.

Flip all 4 cards to reveal the rules. 0/4 flipped
5

MISCONCEPTION ATTACK — Destroy the Myths

DOK 2 — Analyze

Choose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.

Myth 1: “A wire’s field is radial or parallel to its current.”

Myth 2: “The outside-wire formula predicts the field at r = 0.”

6

✦ THE SECOND “AHA!” — Grip Rule and Scaling Checks

DOK 2 — Apply

State the viewpoint and apply the external long-wire model.

Progress
0/4
Long straight wireI is conventional currentr is axis-to-probe distanceNS
Given conditions only; arrows and distances are schematic.

1

Instructor Q1 — Into the Screen

Current is into the page. At a point to the right of the wire, the field points:

2

Instructor Q2 — Equal Changes

Current magnitude and probe distance both double. Field magnitude:

3

Instructor Q3 — Field Magnitude

Find B at 0.050 m from a long wire carrying 4.0 A.

Field MagnitudeI: 4.0 Ar: 0.050 mNS
Given conditions only; arrows and distances are schematic.
T
4

Instructor Q4 — Distance Conversion

A fixed-current field is 24 μT at 3.0 cm. Find it at 6.0 cm.

Distance ConversionInitial B: 24 μTr changes: 3 to 6 cmNS
Given conditions only; arrows and distances are schematic.
T
7

✎ PRACTICE — Independent Wire-Field Calculations

DOK 1–3 — Practice
DOK 1 — Routine

Challenge 1: Compute the External Field

A long straight wire carries 5.0 A in free space. Find the magnetic-field magnitude at perpendicular distance 0.10 m from its axis. Give any equivalent valid decimal or scientific-notation answer.

Compute the External FieldI: 5.0 Ar: 0.10 mr
Given conditions only; arrows and distances are schematic.
T
DOK 2 — Application

Challenge 2: Two Controls Change

A 3.0 A wire produces a 15 μT field at a probe. Keeping the long-wire geometry, the current becomes 6.0 A and the probe distance triples. Find the new field magnitude and the original probe distance.

Two Controls ChangeInitial I: 3.0 AInitial B: 15 μTNew I: 6.0 ANew r: 3 × originalr
Given conditions only; arrows and distances are schematic.
T
m
DOK 3 — Audit & Justify

Challenge 3: Audit the Axis and Compass Claims

A long solid cylindrical wire of radius 2.0 mm carries 8.0 A uniformly through its cross-section. A report applies the outside formula at the axis and predicts infinite field; it also says a horizontal compass at a point where the wire field is vertical must point into its own dial. Find B at the axis and at r = 10 mm. Correct both claims, distinguish the finite conductor from a line-current model, and propose a controlled test of inverse-distance scaling outside the wire.

Audit the Axis and Compass ClaimsWire radius: 2.0 mmUniform current: 8.0 AOutside probe: 10 mmr
Given conditions only; arrows and distances are schematic.
T
T

Explanation checks are indicative. Compare your reasoning with the worked solution or your teacher.

8

☷ CHALLENGE — Direction in a Specified Page

DOK 2 — Apply

Direction in a Specified Page

Select each statement and place it in its matching category. Judge the physical conditions.

0 / 6 correct

9

TEACH — The Feynman Technique

DOK 3 — Teach

Your Final Mission: Explain the long-wire field pattern, a grip-rule example with a stated viewpoint, inverse-distance scaling, and why a compass mounting and the finite wire radius matter.

Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.

Type Your Explanation (≥ 3 sentences)

Final reward below

Hidden exam secrets inside — Crest's private notebook.