WONDER — The Mystery
Circuits Change with Time
A resistor dissipates energy while a capacitor and an inductor store energy in different fields. A source-driven RC circuit charges gradually; an RL current grows gradually. An isolated ideal LC circuit exchanges electric and magnetic energy and reverses current. Circuit topology and initial conditions determine each response.
Model: For ideal constant components: series RC time constant is RC, series RL time constant is L/R, and isolated lossless LC angular frequency is 1/√(LC). Capacitor voltage and inductor current remain continuous under finite current and voltage respectively. A larger R slows RC charging but reduces RL time constant and its final source-driven current.
PREDICT — Commit to Your Answer
DOK 2 — PredictAn initially uncharged capacitor charges through a resistor from a fixed ideal DC voltage source. Resistance doubles, with capacitance unchanged. What happens to the time to reach the same specified fraction of final capacitor voltage?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
RC doubles. The final voltage remains the source voltage; the initial current halves. The exponential reaches its final value asymptotically.
▶ PLAY — Connected Circuits with Moving Current
DOK 2 — InvestigatePredict, measure and compare
For RC charging, compare R at fixed C and source voltage, then C at fixed R and voltage. Inspect physical elapsed time rather than playback duration. Also run RC discharge, RL growth and LC oscillation; test zero initial/source voltage.
Mode 0 = RC charging from zero with ideal DC source V0; mode 1 = source-free RC discharge initially at V0; mode 2 = RL growth from zero current with DC source V0; mode 3 = isolated lossless LC initially at capacitor voltage V0 with zero current. Components are ideal and constant. Positive current is clockwise, into the capacitor top plate when present. RC charge: Vc = V0(1−exp(−t/(RC))), I = (V0/R)exp(−t/(RC)). RC discharge: Vc = V0exp(−t/(RC)), I = −Vc/R. RL: I = (V0/R)(1−exp(−tR/L)), Vl = V0exp(−tR/L). LC: Vc = V0cosωt and I = −V0√(C/L)sinωt, ω = 1/√(LC). Electric and magnetic energies are ½CVc² and ½LI². Exact resistor heat and source work are integrated for each response; LC total energy stays constant. First-order runs cover 5 time constants; LC covers 2 voltage/current periods. Every run plays over 6 real seconds, so compare measured physical times, not apparent playback speed. Conventional-current markers move with signed schematic speed proportional to I and do not cross the capacitor dielectric. Plate charge signs and energy bars change live. These markers are not measured carrier drift. R is absent in LC; L is absent in RC; C is absent in RL. Zero V0 gives no current or stored energy.
Status: Ready
Playback: 6 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Topology and Initial Conditions Matter
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
RC charging and discharging
Click to flip
RC charging and discharging
For charging from zero through R from a constant ideal source V0, Vc = V0(1−exp(−t/(RC))). For discharge initially at V0 through R with the source removed, Vc = V0exp(−t/(RC)). Charge, voltage and current magnitudes change exponentially; after RC about 63.2% of charging change is complete or 36.8% remains on discharge.
Rule 2
RL step response
Click to flip
RL step response
For a source V0 in series with R and ideal L, starting from zero current: I = (V0/R)(1−exp(−tR/L)), with τ = L/R. Increasing R reduces τ and final current V0/R. It does not increase initial slope V0/L. A source-free closed RL decay has I = I0exp(−tR/L).
Rule 3
LC oscillation and sign
Click to flip
LC oscillation and sign
For an isolated lossless LC circuit with Vc(0) = V0 and I(0) = 0, Vc = V0cosωt. If positive current enters the capacitor reference-positive plate, I = C dVc/dt = −V0√(C/L)sinωt. Current keeps the same direction while charging the opposite polarity after the first zero-charge point; it reverses only at a current-zero extremum.
Rule 4
Energy and physical continuity
Click to flip
Energy and physical continuity
Resistor heat is ∫I²R dt. A capacitor stores ½CV² and a linear inductor stores ½LI². Finite current cannot jump capacitor voltage, and finite voltage cannot jump inductor current. Ideal LC energy is conserved; real losses damp oscillation. Energy in each storage element repeats at twice the voltage/current frequency.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “Capacitors and inductors store energy in the same field.”
Correct — the claim is false.
False. Capacitors store electric field energy, and inductors store magnetic field energy.
Myth 2: “An inductor always blocks current completely.”
Correct — the claim is false.
False. An ideal inductor opposes changes in current. It can carry steady DC with zero inductive terminal voltage; real winding resistance remains.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Time Constants and Initial States
DOK 2 — ApplyQualify RC, RL and LC separately. Quantitative time evolution and inductor dynamics are labelled extensions where needed.
Instructor Q1 — Initial RC Charging
Immediately after connecting an uncharged capacitor in series with R to ideal source V0, its capacitor voltage is:
Instructor Q2 — Larger RL Resistance
Increase R with source V0 and ideal L fixed. Which pair is correct?
Instructor Q3 — RC Discharge Time Constant
A capacitor discharges through 300 Ω with C = 20 μF. Find the time constant.
Instructor Q4 — LC Current Frequency
An ideal isolated LC circuit has L = .040 H and C = 100 μF. Find the voltage/current oscillation frequency.
4/4 — Instructor Questions Completed
Compare the same physical time or the same defined fractional response, and specify both topology and initial conditions.
✎ PRACTICE — Independent Circuit Response Audits
DOK 1–3 — PracticeChallenge 1: RC Time Constant
An ideal capacitor of 40 μF discharges through a 150 Ω resistor after its source is removed. Find the time constant.
Step-by-Step Solution
τ = 150×40×10⁻⁶ = .0060 s.
Challenge 2: Discharge and Thermal Energy
A 200 μF capacitor is initially charged to 12 V. It discharges through 5.0 kΩ, with no source connected. After 1.0 s, find capacitor voltage, remaining electric energy and thermal energy transferred to the resistor.
Step-by-Step Solution
τ = 1.0 s; Vc = 12/e ≈ 4.4146 V; U0 = .0144 J; Uc = U0/e² ≈ .0019488 J; heat = U0−Uc ≈ .012451 J.
Challenge 3: Audit an LC Quarter-Cycle Report
An isolated ideal LC circuit has L = 0.20 H, C = 50 μF and initial capacitor voltage 8.0 V with zero current. The reference-positive plate starts positively charged. Positive current is defined into that plate. Find total initial energy and signed current when capacitor charge first reaches zero. A report says current reverses at that zero-charge instant, resistor heat must equal the lost electric energy, and capacitor voltage reaches the opposite extremum immediately. Correct all three claims and describe what happens before the next current-zero instant.
Explanation checks are indicative. Compare your reasoning with the worked solution or your teacher.
Step-by-Step Solution
U0 = ½×50×10⁻⁶×8² = .0016 J. At the first Vc = 0, I = −8√(50×10⁻⁶/.20) ≈ −.12649 A, and all energy is magnetic. Current is maximal in magnitude and does not reverse there. No resistor exists in the ideal model, so no heat is dissipated. The same current direction continues, charging the reference-positive plate negatively. A quarter-period later capacitor voltage reaches −8 V and current reaches zero; current reverses after that extremum.
☷ CHALLENGE — First Half-Cycle of an Ideal LC Oscillator
DOK 2 — ApplyFirst Half-Cycle of an Ideal LC Oscillator
Select each statement and place it in its matching category. Judge the physical conditions.
0 / 6 correct
Physics Insight
The current does not reverse at zero charge. Storage energies repeat twice per full charge/current cycle; a small-angle ideal pendulum provides a mathematical analogy.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain RC and RL time responses, continuity, their opposite resistance dependence, and how an isolated ideal LC circuit exchanges electric and magnetic energy while charge and current change phase.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 11.20 — RC, RL and LC Circuits
Reach the Peak of Understanding
1. RC charging and discharging
For charging from zero through R from a constant ideal source V0, Vc = V0(1−exp(−t/(RC))). For discharge initially at V0 through R with the source removed, Vc = V0exp(−t/(RC)). Charge, voltage and current magnitudes change exponentially; after RC about 63.2% of charging change is complete or 36.8% remains on discharge.
2. RL step response
For a source V0 in series with R and ideal L, starting from zero current: I = (V0/R)(1−exp(−tR/L)), with τ = L/R. Increasing R reduces τ and final current V0/R. It does not increase initial slope V0/L. A source-free closed RL decay has I = I0exp(−tR/L).
3. LC oscillation and sign
For an isolated lossless LC circuit with Vc(0) = V0 and I(0) = 0, Vc = V0cosωt. If positive current enters the capacitor reference-positive plate, I = C dVc/dt = −V0√(C/L)sinωt. Current keeps the same direction while charging the opposite polarity after the first zero-charge point; it reverses only at a current-zero extremum.
4. Energy and physical continuity
Resistor heat is ∫I²R dt. A capacitor stores ½CV² and a linear inductor stores ½LI². Finite current cannot jump capacitor voltage, and finite voltage cannot jump inductor current. Ideal LC energy is conserved; real losses damp oscillation. Energy in each storage element repeats at twice the voltage/current frequency.
5. Five time constants
After 5τ the charging change is about 99.3% complete; exponential discharge leaves about 0.67%. The mathematical final value is approached asymptotically, not reached at one fixed finite time.
6. Damping and tuned circuits
Real resistance and other losses damp LC oscillations. Not every lossy RLC circuit oscillates: sufficiently strong damping prevents oscillation. Resonant/tuned circuits can select frequency ranges; they do not perfectly isolate one station without other circuit design. The simple pendulum analogy uses small angles.
Worked independent practice
C1: .0060 s. C2: about 4.4146 V, .0019488 J remaining and .012451 J of resistor heat. C3: .0016 J and −.12649 A at first zero charge; current continues to charge the opposite polarity, with no ideal resistor heating.
Live investigation and access
Mode 0 = RC charging from zero with ideal DC source V0; mode 1 = source-free RC discharge initially at V0; mode 2 = RL growth from zero current with DC source V0; mode 3 = isolated lossless LC initially at capacitor voltage V0 with zero current. Components are ideal and constant. Positive current is clockwise, into the capacitor top plate when present. RC charge: Vc = V0(1−exp(−t/(RC))), I = (V0/R)exp(−t/(RC)). RC discharge: Vc = V0exp(−t/(RC)), I = −Vc/R. RL: I = (V0/R)(1−exp(−tR/L)), Vl = V0exp(−tR/L). LC: Vc = V0cosωt and I = −V0√(C/L)sinωt, ω = 1/√(LC). Electric and magnetic energies are ½CVc² and ½LI². Exact resistor heat and source work are integrated for each response; LC total energy stays constant. First-order runs cover 5 time constants; LC covers 2 voltage/current periods. Every run plays over 6 real seconds, so compare measured physical times, not apparent playback speed. Conventional-current markers move with signed schematic speed proportional to I and do not cross the capacitor dielectric. Plate charge signs and energy bars change live. These markers are not measured carrier drift. R is absent in LC; L is absent in RC; C is absent in RL. Zero V0 gives no current or stored energy.
Run, Pause, Step and Reset work offline. Complete three matched measurements. Loading a preset is not completing a trial. Saved progress resumes paused. Reduced-motion Run gives a final snapshot; Step allows deliberate inspection. Hints and solutions require a genuine unsuccessful numerical attempt and never complete a task. Explanation rubrics are indicative; compare your physics with the solution or a teacher. Teaching submission checks effort rather than certifying scientific accuracy.
Course scope
Cambridge 9702 19.3 requires quantitative RC discharge. AP Physics 2 11.8 requires qualitative RC charging/discharging and mathematical initial/final states; mathematical time evolution is beyond its boundary. RC charging equations, quantitative evolution for AP, and RL/LC dynamics here are explicit enrichment.
Sources: Cambridge International 9702 syllabus ; College Board AP Physics 2 CED. Detailed extension models are labelled in the mission.
✓ Crest’s Checklist
- I draw connected circuits with no component bypass.
- I state initial conditions and current reference.
- I read physical time rather than playback speed.
- I distinguish voltage-zero and current-zero instants.
- I conserve storage, source work and resistor heat.
- I label quantitative and RL/LC extension content.
— Crest ☆ “Reach the Peak of Understanding”
Mission 11.20 Complete! · All 10 levels cleared · PHYSICS CREST
★ RC, RL and LC Circuits Investigator
Compare the same physical time or the same defined fractional response, and specify both topology and initial conditions.