WONDER — The Mystery
Electrical Oscillation Becomes Cone Motion
A moving-coil loudspeaker transfers amplifier energy into motion and sound. Its voice coil lies in a radial magnetic gap, so forces around the coil add along the speaker axis. The cone has mass and a suspension: changing force does not instantly reverse its velocity.
Model: For a coil fully inside a uniform radial gap, axial force F = B Lactive I. Lactive is the total conductor length experiencing the useful radial field. A closed coil in a spatially uniform vector field instead has zero net force, although it can have torque. The permanent magnet establishes the gap field; the amplifier supplies the operating energy.
PREDICT — Commit to Your Answer
DOK 2 — PredictIn an operating speaker the current changes sign. Which response follows immediately?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
Current reversal reverses the motor-effect force. Cone displacement and velocity follow mass, suspension and damping; their phase need not match current.
▶ PLAY — A Suspended Cone in Periodic Motion
DOK 2 — InvestigatePredict, measure and compare
Compare two current amplitudes at one frequency, then two frequencies at one current amplitude. Watch cone translation and measure force, displacement and phase. Try zero drive.
Extension: an ideal regulated sinusoidal current drives a linear moving-coil speaker with B = 0.50 T, active length 4.0 m, mass 0.020 kg, suspension stiffness 1000 N/m and damping 2.0 N s/m. The steady periodic response satisfies m x″ + c x′ + k x = BL I0 sin(2πft); startup transients are omitted. Peak displacement is BL I0 / √[(k−mω²)²+(cω)²] and displacement lags current by atan2(cω,k−mω²). A 0.10 s physical interval plays over 6 real seconds. Displacement is magnified at a fixed 15000 pixels/m, not drawn to scale. Reset rewinds the periodic phase; it is not a physical switch-off experiment. Damping represents dissipative and radiative loading. No audio is generated.
Status: Ready
Playback: 6 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Force, Response and Energy
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Radial gap geometry
Click to flip
Radial gap geometry
Useful conductor segments encounter radial B. Their tangential current directions make their axial forces add. F = BLactive I requires the stated gap geometry; a closed loop in a uniform vector field does not have this net force.
Rule 2
Frequency and phase
Click to flip
Frequency and phase
For a sinusoidal drive and linear steady response, the cone oscillates at the drive frequency. Displacement can lag current and depends on mass, stiffness and damping. Force reversal is not an instantaneous velocity reversal.
Rule 3
Amplitude and loudness
Click to flip
Amplitude and loudness
At fixed frequency in the linear model, doubling current amplitude doubles force and displacement amplitudes. Sound level also depends on frequency response, radiation and distance. Doubling frequency does not generally double displacement or loudness.
Rule 4
Energy conversion
Click to flip
Energy conversion
Amplifier electrical energy becomes cone motion, sound and heat. The permanent magnet supplies a field, not continuous operating energy. An unpowered cone can still ring after excitation or move when acted on externally.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “A cone instantly reverses its velocity whenever current changes sign.”
Correct — the claim is false.
False. Current changes the driving force. A finite force changes velocity continuously because the cone has inertia.
Myth 2: “Any closed coil in a uniform vector magnetic field has net force BLI.”
Correct — the claim is false.
False. A closed loop in a uniform vector field has zero net force. A speaker uses a radial gap so the relevant conductor forces add axially.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Current, Frequency and Device Geometry
DOK 2 — ApplyDistinguish a driving force from the mechanical response.
Instructor Q1 — Driving Force
At fixed gap geometry, doubling current amplitude doubles:
Instructor Q2 — Coasting Cone
At an instant the current is zero. A previously moving cone:
Instructor Q3 — Gap Force
B = 0.40 T, active conductor length 3.0 m and instantaneous current 0.20 A. Find driving force magnitude.
Instructor Q4 — A4 Period
A sinusoidal drive has frequency 440 Hz. Find its period.
4/4 — Instructor Questions Completed
Use radial-gap geometry for force and a mechanical response for cone motion; do not equate force direction with velocity direction.
✎ PRACTICE — Independent Speaker Investigations
DOK 1–3 — PracticeChallenge 1: Voice-Coil Force
A moving coil has 2.0 m of useful conductor length in a uniform radial 0.50 T gap. Its instantaneous current is 0.15 A. Find the axial driving force magnitude.
Step-by-Step Solution
F = 0.50 × 2.0 × 0.15 = 0.150 N.
Challenge 2: Time and Oscillation Count
A speaker reaches linear steady response to a 250 Hz sinusoidal current. Find the cone oscillation period and the number of complete cycles in 0.020 s.
Step-by-Step Solution
T = 1/250 = 0.0040 s; cycles = 250 × 0.020 = 5.
Challenge 3: Audit a Speaker Report
A radial-gap speaker has B = 0.20 T, active length 5.0 m and sinusoidal current of peak 0.40 A at 200 Hz. Find peak driving force and period. A report claims that doubling frequency always doubles cone displacement, current reversal instantly reverses cone velocity, and the permanent magnet supplies the continuous sound energy. Correct all three claims and explain why radial-gap geometry matters for net force.
Explanation checks are indicative. Compare your reasoning with the worked solution or your teacher.
Step-by-Step Solution
Peak force = 0.20×5.0×0.40 = 0.40 N; period = 1/200 = 0.0050 s. Displacement depends on frequency response, mass, stiffness and damping, so frequency doubling does not universally double it. Inertia keeps velocity continuous under finite force. The amplifier supplies energy; the magnet establishes B. A radial gap makes conductor forces add axially; a closed coil in a uniform vector field has zero net force.
☷ CHALLENGE — From Amplifier to Sound
DOK 2 — ApplyFrom Amplifier to Sound
Place the six causal steps in order from the amplifier to a receiver.
0 / 6 correct
Physics Insight
Use radial-gap geometry for force and a mechanical response for cone motion; do not equate force direction with velocity direction.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain radial-gap force, how the cone produces pressure waves, the roles of inertia and phase, frequency and amplitude, and the source of operating energy.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 11.11 — Loudspeakers
Reach the Peak of Understanding
1. Radial gap geometry
Useful conductor segments encounter radial B. Their tangential current directions make their axial forces add. F = BLactive I requires the stated gap geometry; a closed loop in a uniform vector field does not have this net force.
2. Frequency and phase
For a sinusoidal drive and linear steady response, the cone oscillates at the drive frequency. Displacement can lag current and depends on mass, stiffness and damping. Force reversal is not an instantaneous velocity reversal.
3. Amplitude and loudness
At fixed frequency in the linear model, doubling current amplitude doubles force and displacement amplitudes. Sound level also depends on frequency response, radiation and distance. Doubling frequency does not generally double displacement or loudness.
4. Energy conversion
Amplifier electrical energy becomes cone motion, sound and heat. The permanent magnet supplies a field, not continuous operating energy. An unpowered cone can still ring after excitation or move when acted on externally.
5. Dynamic microphone
A moving-coil dynamic microphone uses relative motion in a magnetic gap to induce an e.m.f. This is the reverse transduction principle, not a description of every microphone type.
6. Pitch and waveform
A pure 440 Hz tone is A4 in standard concert tuning. Complex sound contains multiple frequencies; perceived pitch and loudness are not fully specified by one amplitude alone. Clipping and nonlinear response can add harmonics.
Worked independent practice
C1: 0.150 N. C2: 0.0040 s and 5 cycles. C3: 0.40 N and 0.0050 s; qualify frequency response, inertia, amplifier energy and radial geometry.
Live investigation and access
Extension: an ideal regulated sinusoidal current drives a linear moving-coil speaker with B = 0.50 T, active length 4.0 m, mass 0.020 kg, suspension stiffness 1000 N/m and damping 2.0 N s/m. The steady periodic response satisfies m x″ + c x′ + k x = BL I0 sin(2πft); startup transients are omitted. Peak displacement is BL I0 / √[(k−mω²)²+(cω)²] and displacement lags current by atan2(cω,k−mω²). A 0.10 s physical interval plays over 6 real seconds. Displacement is magnified at a fixed 15000 pixels/m, not drawn to scale. Reset rewinds the periodic phase; it is not a physical switch-off experiment. Damping represents dissipative and radiative loading. No audio is generated.
Run, Pause, Step and Reset work offline. Complete three matched measurements. Loading a preset is not completing a trial. Saved progress resumes paused. Reduced-motion Run gives a final snapshot; Step allows deliberate inspection. Hints and solutions require a genuine unsuccessful numerical attempt and never complete a task. Explanation rubrics are indicative; compare your physics with the solution or a teacher. Teaching submission checks effort rather than certifying scientific accuracy.
Course scope
The conductor force is required by A Level 9702 20.2 and AP Physics 2 12.3. A moving-coil loudspeaker is a supporting application; the mass–spring–damper model and detailed phase response are labelled extensions.
Sources: Cambridge International 9702 syllabus ; College Board AP Physics 2 CED. Detailed extension models are labelled in the mission.
✓ Crest’s Checklist
- I use the active conductor length.
- I distinguish radial B from a uniform vector B.
- I distinguish force, velocity and displacement.
- I identify amplifier energy.
- I qualify linear steady response.
— Crest ☆ “Reach the Peak of Understanding”
Mission 11.11 Complete! · All 10 levels cleared · PHYSICS CREST
★ Loudspeakers Investigator
Use radial-gap geometry for force and a mechanical response for cone motion; do not equate force direction with velocity direction.