Skip to lesson
PC

PHYSICS CREST

Global Physics Academy

Mission 11.10 · Forces Between Parallel Wires Reach the Peak of Understanding
Journey Tracker
Progress
0/10
1

WONDER — The Mystery

Each Wire Acts on the Other

Two long parallel wires carrying currents can attract or repel. Each produces a tangential magnetic field at the other; that field then acts on the other current. Different current magnitudes do not make the reciprocal forces unequal on equal interacting lengths.

Two parallel current pathsAxis separation dUse the other wire’s fieldNS
Given conditions only; arrows and distances are schematic.

Model: For ideal long straight parallel wires in vacuum, magnitude F/L = μ₀|I₁I₂|/(2πd). Same-direction currents attract; opposite-direction currents repel. d is the perpendicular axis separation. The field at a wire is due to the other source, not its own field in this interaction calculation.

2

PREDICT — Commit to Your Answer

DOK 2 — Predict

Two long parallel wires carry currents of 3 A and 9 A in the same direction. Compare the magnetic forces on equal interacting lengths.

Two parallel current pathsAxis separation dUse the other wire’s fieldNS
Given conditions only; arrows and distances are schematic.

Commit to both a prediction and a reason before revealing the explanation.

Step 1: Pick your answer.

STOP! Before revealing — why did you pick that?

3

▶ PLAY — Two Wires Actually Move Together or Apart

DOK 2 — Investigate

Predict, measure and compare

Compare two values of I₁ while holding I₂ and initial spacing fixed, then two initial spacings with currents fixed. Watch both wires translate as their instantaneous separation and mutual force change. Check reversed I₂ and zero current.

Two effectively long parallel nonmagnetic wires have equal mass per unit length μ = 0.020 kg/m and regulated steady currents. I₁ is positive out of the page; signed I₂ is positive out, negative into the page. Their cross-sections move symmetrically along x from rest; the center stays fixed. Initially separated by d₀, they obey d″ = −2k/(μd), where k = 2×10⁻⁷ I₁I₂ in SI units. Each force per length has magnitude |k|/d, so force changes during motion. A numerical velocity-Verlet integration uses 0.001 s steps. Protective supports stop inward motion at d = 0.030 m and remove kinetic energy at contact; no singular collision is modeled. The wires remain parallel; gravity and lead forces are supported and end effects neglected. Regulated sources supply or absorb electrical/mechanical energy; real wires also heat. Two model seconds play over six real seconds. Cross-section positions use a common scale; conductor radii and force arrows are schematic.

Use the labelled readouts.

Status: Ready

Playback: 6 real seconds per run; read elapsed physical model time. Pause or Step for measurements.

Measurements

Model time:
Instantaneous axis separation:
Force magnitude per length:
Wire 1 field at wire 2:
Right-wire signed velocity:
Interaction/support state:

Load givens — then predict and run

Loading a setup earns no trial credit.

4

♢ DISCOVER — Field First, Force Second

DOK 1 — Recall

Flip all 4 rule cards. Keep the quantities and model conditions clear.

Rule 1

Field at the other wire

Click to flip

Field at the other wire

Wire 1 produces B₁ = μ₀|I₁|/(2πd) at wire 2, tangential to a circle about wire 1 and perpendicular to the plane of the two parallel axes. This field does not point radially toward wire 1.

Rule 2

Force and reciprocal equality

Click to flip

Force and reciprocal equality

For equal interacting lengths, magnitude F = |I₂|LB₁ gives F/L = μ₀|I₁I₂|/(2πd). Interchanging the wires gives the same magnitude. If currents differ, their fields differ but the reciprocal force products match.

Rule 3

Direction and scaling

Click to flip

Direction and scaling

Same-direction currents attract and opposite-direction currents repel. The magnitude is linear in each current magnitude and inversely proportional to axis separation. Doubling both currents multiplies magnitude by four; doubling separation halves it.

∫

Rule 4

Model and SI precision

Click to flip

Model and SI precision

The formula assumes long straight parallel wires in vacuum, with radii much smaller than separation and end/return effects negligible. μ₀ ≈ 4π×10⁻⁷ T m/A is the school approximation. The pre-2019 ampere used a two-wire force definition; the modern ampere fixes elementary charge e, not that force experiment.

Flip all 4 cards to reveal the rules. 0/4 flipped
5

MISCONCEPTION ATTACK — Destroy the Myths

DOK 2 — Analyze

Choose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.

Myth 1: “The wire carrying the larger current always experiences the larger reciprocal force.”

Myth 2: “If wire 2 has zero current, wire 1 produces zero field at its position.”

6

✦ THE SECOND “AHA!” — Interaction and Force-per-Length Checks

DOK 2 — Apply

Use equal interacting lengths and the ideal long-wire assumptions.

Progress
0/4
Two parallel current pathsAxis separation dUse the other wire’s fieldNS
Given conditions only; arrows and distances are schematic.

1

Instructor Q1 — Source Field Direction

Wire 1’s field at wire 2 is:

2

Instructor Q2 — Opposite Currents

Opposite-direction currents in parallel wires give:

3

Instructor Q3 — Force per Length

I₁ = 5.0 A, I₂ = 5.0 A and d = 0.10 m. Find force magnitude per unit length.

Force per LengthI₁: 5.0 A; I₂: 5.0 AAxis separation: 0.10 mNS
Given conditions only; arrows and distances are schematic.
N/m
4

Instructor Q4 — From Force Density to Force

F/L = 0.40 mN/m. Find the force magnitude on 0.50 m of interacting wire.

From Force Density to ForceF/L: 0.40 mN/mInteracting length: 0.50 mNS
Given conditions only; arrows and distances are schematic.
N
7

✎ PRACTICE — Independent Parallel-Wire Reasoning

DOK 1–3 — Practice
DOK 1 — Routine

Challenge 1: Calculate Force per Length

Two ideal long parallel wires each carry 10 A and are separated by 1.0 m between their axes. Find the magnetic force magnitude per unit length. Use μ₀ ≈ 4π×10⁻⁷ T m/A.

Calculate Force per LengthI₁ = I₂ = 10 AAxis separation: 1.0 md
Given conditions only; arrows and distances are schematic.
N/m
DOK 2 — Application

Challenge 2: Change Two Currents and Spacing

Initially I₁ = 4.0 A, I₂ = 6.0 A and d = 0.080 m. Find the initial force magnitude per length. Then double both current magnitudes and double separation. Find the new force magnitude per length; both currents remain in their original directions.

Change Two Currents and SpacingInitial I₁: 4.0 AInitial I₂: 6.0 AInitial d: 0.080 mBoth I and d doubled
Given conditions only; arrows and distances are schematic.
N/m
N/m
DOK 3 — Audit & Justify

Challenge 3: Audit the Unequal-Current Report

Two ideal long parallel wires carry I₁ = +12 A and I₂ = −8 A relative to the same axis direction. Their axis spacing is 0.040 m. Find the mutual force magnitude per unit length and the force magnitude on 0.50 m of either wire. A report says “the 12 A wire feels a larger force, the currents attract, wire 1’s field points radially toward wire 2, and setting I₂ to zero removes B₁.” Correct all four claims using the two-step field/force model. Explain what happens to magnitude if spacing doubles at fixed currents.

Audit the Unequal-Current ReportI₁: +12 A; I₂: −8 AAxis separation: .040 mEqual interacting L: .50 md
Given conditions only; arrows and distances are schematic.
N/m
N

Explanation checks are indicative. Compare your reasoning with the worked solution or your teacher.

8

☷ CHALLENGE — Mutual Force Magnitude Changes

DOK 2 — Apply

Mutual Force Magnitude Changes

Select each statement and place it in its matching category. Judge the physical conditions.

0 / 6 correct

9

TEACH — The Feynman Technique

DOK 3 — Teach

Your Final Mission: Explain the other wire’s tangential field, attraction/repulsion from I L×B, equal reciprocal forces despite unequal currents, and the distinction between force per length and total force.

Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.

Type Your Explanation (≥ 3 sentences)

Final reward below

Hidden exam secrets inside — Crest's private notebook.