Skip to lesson
PC

PHYSICS CREST

Global Physics Academy

Mission 10.9 · Combination Circuits Simplify valid groups, analyze the whole and expand back to branch quantities.
Journey Tracker
Progress
0/10
1

WONDER — The Mystery

A Series Element Before a Split

A resistor before a junction carries the source current. Two resistors beyond that junction can share the same pair of nodes and divide the current. Replacing that parallel pair by an equivalent resistance helps find source current, but the internal branch currents must then be recovered from the pair’s p.d.

Mixed networkR1 before a junctionR2 and R3 share nodesOne ideal source123
Given conditions only; arrows and distances are schematic.

Model: Use positive finite fixed resistances, ideal wires and a constant-p.d. ideal source. Valid series/parallel reduction preserves behavior at a group’s external terminals. It does not make all original element currents equal. The method applies to reducible networks; other networks require Kirchhoff’s rules directly.

2

PREDICT — Commit to Your Answer

DOK 2 — Predict

R1 lies in series with a true parallel pair R2 and R3. Which is a valid first reduction for a simplify–analyze–expand solution?

Mixed networkR1 before a junctionR2 and R3 share nodesOne ideal source123
Given conditions only; arrows and distances are schematic.

Commit to both a prediction and a reason before revealing the explanation.

Step 1: Pick your answer.

STOP! Before revealing — why did you pick that?

3

▶ PLAY — Live Mixed Circuit & Equivalent Views

DOK 2 — Investigate

Predict, measure and compare

Measure two source p.d.s with resistors fixed, then change only R1. Complete three runs. Watch current move through R1 and divide into unequal branches. Change view to the reduced pair or total equivalent and confirm that source current stays the same.

R1 is in series with R2 ∥ R3. Rp = R2R3/(R2 + R3), Req = R1 + Rp, I = V/Req, V1 = IR1 and Vp = IRp. Branch currents are I2 = Vp/R2 and I3 = Vp/R3. A run lasts 8 model seconds over 8 real seconds. View 0 shows the original network, view 1 replaces the parallel pair by Rp, and view 2 replaces the complete network by Req. These are analytical equivalents, not physical rewiring. Moving markers show conventional-current routes with schematic speeds and counts; numerical readouts give exact junction and energy balances. Resistor power totals equal ideal source output.

Use the labelled readouts.

Status: Ready

Playback: 8 real seconds per run; read elapsed physical model time. Pause or Step for measurements.

Measurements

Elapsed model time:
Parallel-pair equivalent:
Total equivalent resistance:
Source and R1 current:
P.d. across R1:
P.d. across R2 and R3:
Current in R2:
Current in R3:
Junction balance I − I2 − I3:
Total source energy:

Load givens — then predict and run

Loading a setup earns no trial credit.

4

♢ DISCOVER — Simplify, Analyze, Expand and Check

DOK 1 — Recall

Flip all 4 rule cards. Keep the quantities and model conditions clear.

Rule 1

Trace actual nodes

Click to flip

Trace actual nodes

Two elements are parallel only when connected between the same two nodes. Two elements are series only when they carry the same unbranched current. Visual proximity is not enough.

Rule 2

Simplify valid groups

Click to flip

Simplify valid groups

For this topology, reduce R2 ∥ R3 to Rp, then add R1. Other reducible networks may require series groups first or a different reduction order.

Rule 3

Expand back correctly

Click to flip

Expand back correctly

After finding source current, recover the p.d. of each equivalent group. Parallel branch currents use that group p.d., not automatically the full source p.d.

∫

Rule 4

Use conservation and limits

Click to flip

Use conservation and limits

Check I = I2 + I3, V = V1 + Vp and total resistor power = source output. An open branch is not a zero-resistance shortcut. Nonreducible networks may require direct loop and junction equations.

Flip all 4 cards to reveal the rules. 0/4 flipped
5

MISCONCEPTION ATTACK — Destroy the Myths

DOK 2 — Analyze

Choose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.

Myth 1: “Every resistor in a mixed circuit carries the source current.”

Myth 2: “The parallel pair always has the full source p.d. even with a series resistor.”

6

✦ THE SECOND “AHA!” — Reduce, Recover and Verify

DOK 2 — Apply

Identify the exact group and use its own p.d. when expanding.

Progress
0/4
Mixed networkR1 before a junctionR2 and R3 share nodesOne ideal source123
Given conditions only; arrows and distances are schematic.

1

Instructor Q1 — Branch Expansion

Which p.d. is used to calculate I2 after reducing R2 ∥ R3 behind R1?

2

Instructor Q2 — A Different Reducible Pattern

Two parallel branches each contain two series resistors. Which reduction is valid?

3

Instructor Q3 — Parallel Pair

R2 = 4 Ω and R3 = 12 Ω form a true parallel pair. Find Rp.

Parallel-pair givensA = R2: 4 ΩB = R3: 12 ΩAB
Given conditions only; arrows and distances are schematic.
Ω
4

Instructor Q4 — Group P.d.

A source of 16 V drives R1 = 2 Ω in series with a group of equivalent resistance 6 Ω. Find the p.d. across the group.

Reduced group givensSource: ideal 16 VA = R1: 2 ΩB = group: 6 ΩAB
Given conditions only; arrows and distances are schematic.
V
7

✎ PRACTICE — Independent Mixed-Network Audits

DOK 1–3 — Practice
DOK 2 — Application

Challenge 1: One Valid Reduction

An ideal source drives R1 = 4 Ω in series with a parallel pair R2 = 6 Ω and R3 = 9 Ω. Find total equivalent resistance.

Reduction givensR1: 4 ΩR2: 6 Ω; R3: 9 ΩSource p.d. unspecified123
Given conditions only; arrows and distances are schematic.
Ω
DOK 2 — Application

Challenge 2: Recover Branch Current

An ideal 20 V source drives R1 = 2 Ω in series with R2 = 8 Ω and R3 = 8 Ω in parallel. Find source current, the pair p.d. and current in R2.

Branch recovery givensSource: ideal 20 VR1: 2 ΩR2: 8 Ω; R3: 8 Ω123
Given conditions only; arrows and distances are schematic.
A
V
A
DOK 3 — Audit & Justify

Challenge 3: Audit Two Series Branches

An ideal 18 V source drives two parallel branches. The upper branch contains A = 2 Ω in series with B = 4 Ω; the lower contains C = 3 Ω in series with D = 9 Ω. A report adds all four resistances directly, assigns one equal current to all four, and treats removing D with a gap as a shorted lower branch. Find initial equivalent resistance, both initial branch currents and source current after D is removed leaving a gap. Explain all three errors.

Two branch givensA: 2 ΩB: 4 ΩC: 3 ΩD: 9 ΩIdeal source: 18 V; D removed later
Given conditions only; arrows and distances are schematic.
Ω
A
A
A
8

☷ CHALLENGE — Valid Group or Invalid Shortcut?

DOK 2 — Apply

Valid Group or Invalid Shortcut?

Classify each proposed group using paths and nodes rather than position.

0 / 6 correct

9

TEACH — The Feynman Technique

DOK 3 — Teach

Your Final Mission: Explain simplify–analyze–expand using real path and node definitions, recovery of group p.d. and branch current, conservation checks and the difference between an open and a short.

Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.

Type Your Explanation (≥ 3 sentences)

Final reward below

Hidden exam secrets inside — Crest's private notebook.