Skip to lesson
PC

PHYSICS CREST

Global Physics Academy

Mission 10.6 · Electrical Power & Energy Power is a rate; energy is the transfer accumulated over time.
Journey Tracker
Progress
0/10
1

WONDER — The Mystery

Same Energy, Different Rates

A 12 W device transfers 12 J each second while it operates at that power. Its energy use depends on how long it runs. Two devices can transfer the same total energy at different rates, and devices of different technologies can give different useful light output at the same electrical power.

Power measurementMeasure V and ISpecify operating timeTrack useful and thermal+−
Given conditions only; arrows and distances are schematic.

Model: For a circuit element, electrical power transfer is P = VI with a consistent sign convention. For a resistor obeying V = IR at its operating point, P = I²R = V²/R. Energy E = Pt requires constant power. Rated-device comparisons apply at the stated rating and conditions; brightness needs comparable technology or a stated useful-output model.

2

PREDICT — Commit to Your Answer

DOK 2 — Predict

Two fixed resistors separately operate across the same ideal p.d. The resistance of B is twice that of A. Which has greater electrical power?

Power measurementMeasure V and ISpecify operating timeTrack useful and thermal+−
Given conditions only; arrows and distances are schematic.

Commit to both a prediction and a reason before revealing the explanation.

Step 1: Pick your answer.

STOP! Before revealing — why did you pick that?

3

▶ PLAY — Live Power & Energy Transfer Lab

DOK 2 — Investigate

Predict, measure and compare

Run two p.d.s with resistance and useful-output fraction fixed, then change only resistance. Complete three runs. Watch current markers circulate, light-transfer pulses move outward and useful/thermal energy totals grow.

An ideal steady DC source drives a fixed-resistance model load. P = VI = I²R = V²/R; useful-output fraction η is a declared model parameter. Useful power is ηP and remaining power transfers thermally. A run lasts 60 model seconds over 8 real seconds. Moving circuit markers represent conventional current at schematic speed. Gold outward pulses indicate useful light transfer schematically; pulse speed, number and drawn brightness are not quantitative optical measurements. Accumulated useful energy plus thermal energy equals input energy. No temperature is inferred from power alone.

Use the labelled readouts.

Status: Ready

Playback: 8 real seconds per run; read elapsed physical model time. Pause or Step for measurements.

Measurements

Elapsed model time:
Current:
Electrical power:
Useful-output power:
Electrical energy transferred:
Useful energy:
Thermal energy:
Input energy in kWh:

Load givens — then predict and run

Loading a setup earns no trial credit.

4

♢ DISCOVER — Use the Right Quantity and Constraint

DOK 1 — Recall

Flip all 4 rule cards. Keep the quantities and model conditions clear.

Rule 1

Power is a rate

Click to flip

Power is a rate

P = VI. 1 W = 1 J/s. Resistor forms P = I²R and P = V²/R follow from the operating-point relationship V = IR.

Rule 2

Energy includes time

Click to flip

Energy includes time

For constant power, E = Pt in joules when P is in W and t in s. If power varies, energy is the area under the P–t graph.

Rule 3

Squared comparisons need fixed R

Click to flip

Squared comparisons need fixed R

At fixed R, doubling V or I quadruples P. At fixed V, increasing R lowers power; at fixed I, increasing R raises power.

∫

Rule 4

Ratings and useful output

Click to flip

Ratings and useful output

A power rating is for stated operating conditions. At the same p.d., a higher rated resistor-model power implies lower operating R. Different lamp technologies need not have equal brightness at equal electrical power.

Flip all 4 cards to reveal the rules. 0/4 flipped
5

MISCONCEPTION ATTACK — Destroy the Myths

DOK 2 — Analyze

Choose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.

Myth 1: “A kilowatt-hour is a unit of power.”

Myth 2: “Doubling voltage always doubles resistor power.”

6

✦ THE SECOND “AHA!” — Rates, Energy and Unit Conversion

DOK 2 — Apply

Use constant power where stated and convert seconds and hours consistently.

Progress
0/4
Power measurementMeasure V and ISpecify operating timeTrack useful and thermal+−
Given conditions only; arrows and distances are schematic.

1

Instructor Q1 — Unit Meaning

Which quantity is measured in watts?

2

Instructor Q2 — A Fixed Current

Two resistors carry the same fixed current. One has twice the resistance. How does its power compare?

3

Instructor Q3 — Electrical Power

A load has 10 V across it and carries 0.8 A. Find power.

Electrical Power givensP.d.: 10 VCurrent: 0.8 A+−
Given conditions only; arrows and distances are schematic.
W
4

Instructor Q4 — Energy in kWh

A device operates at constant 300 W for 2 h. Find energy in kWh.

Energy in kWh givensPower: 300 WTime: 2 h+−
Given conditions only; arrows and distances are schematic.
kWh
7

✎ PRACTICE — Independent Power and Energy Audits

DOK 1–3 — Practice
DOK 1 — Routine

Challenge 1: Rate and Total

A device has 8 V across it and current 0.75 A for 3 minutes, both constant. Find electrical power and transferred energy.

Rate and Total givensP.d.: 8 VCurrent: 0.75 ATime: 3 min+−
Given conditions only; arrows and distances are schematic.
W
J
DOK 2 — Application

Challenge 2: Equal Useful Output

Two stated model lamps give equal useful light output but draw 36 W and 12 W respectively. Each is used 4 h per day for 30 days. A fictional tariff is 0.20 credits per kWh. Find the energy saved by choosing the 12 W model and the corresponding cost saving.

Equal Useful Output givensPowers: 36 W and 12 WEqual useful light outputUse: 4 h/day, 30 daysTariff: 0.20 credits/kWh+−
Given conditions only; arrows and distances are schematic.
kWh
credits
DOK 3 — Audit & Justify

Challenge 3: Audit the Power Report

A fixed 4 Ω resistor operates across an ideal 10 V source for 150 s. A report calls watts accumulated energy, says doubling the p.d. at the same resistance only doubles power, and claims any two lamp technologies with equal electrical power must have equal brightness. Find the initial power, initial energy and power after doubling p.d. Explain all three errors.

Audit the Power Report givensP.d.: 10 VResistance: 4 ΩInitial time: 150 sSecond p.d.: doubledResistance unchanged+−
Given conditions only; arrows and distances are schematic.
W
J
W
8

☷ CHALLENGE — Power, Energy or Cost?

DOK 2 — Apply

Power, Energy or Cost?

Classify the quantity represented; a price per kWh is a tariff, not itself an accumulated cost.

0 / 6 correct

9

TEACH — The Feynman Technique

DOK 3 — Teach

Your Final Mission: Explain watts versus joules and kWh, the fixed-variable power comparisons, and why useful output rather than electrical power alone determines cross-technology brightness.

Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.

Type Your Explanation (≥ 3 sentences)

Final reward below

Hidden exam secrets inside — Crest's private notebook.