Skip to lesson
PC

PHYSICS CREST

Global Physics Academy

Mission 10.4 · Resistance & Resistivity Compare material, length and cross-sectional area under stated conditions.
Journey Tracker
Progress
0/10
1

WONDER — The Mystery

A Material Name Is Not Enough

Two wires made of the same material can have different resistances because their lengths and cross-sectional areas differ. Conversely, a sufficiently thick wire of a higher-resistivity material can have lower resistance than a thin wire of another material. Compare geometry and material under the same temperature conditions.

Uniform wire givensMaterial resistivity ρLength LCross-sectional area A+−
Given conditions only; arrows and distances are schematic.

Model: Use a uniform ohmic wire with constant cross-sectional area, uniform temperature and resistivity. R = ρL/A applies along its length. Ignore contact resistance and self-heating changes in the simulation by holding temperature constant. Resistivity is a material property under specified conditions, not a universal temperature-independent constant.

2

PREDICT — Commit to Your Answer

DOK 2 — Predict

Two uniform wires have the same material and temperature. Wire B is twice as long as A and has the same cross-sectional area. How do their resistances compare?

Uniform wire givensMaterial resistivity ρLength LCross-sectional area A+−
Given conditions only; arrows and distances are schematic.

Commit to both a prediction and a reason before revealing the explanation.

Step 1: Pick your answer.

STOP! Before revealing — why did you pick that?

3

▶ PLAY — Live Uniform-Wire Resistance Lab

DOK 2 — Investigate

Predict, measure and compare

Measure two wire lengths with area and resistivity fixed, then change only cross-sectional area. Complete three runs. Watch conventional-current markers circulate and thermal energy accumulate under the fixed 3 V supply.

An ideal 3 V source drives one uniform ohmic wire at constant temperature. ρ is entered in units of 10⁻⁶ Ω m, length in m and cross-sectional area in mm². R = ρL/A and I = 3/R. Thermal energy transferred is I²Rt. A run lasts 8 model seconds over 8 real seconds. The drawn resistive section has a fixed length scale of 40 pixels per metre; its transverse thickness indicates relative area schematically. Moving dots show conventional current with schematic speed. Temperature is held constant by an ideal thermal reservoir, so accumulated transferred energy does not change ρ during a run.

Use the labelled readouts.

Status: Ready

Playback: 8 real seconds per run; read elapsed physical model time. Pause or Step for measurements.

Measurements

Elapsed model time:
Resistivity:
Area in SI units:
Wire resistance:
Current:
Thermal power:
Thermal energy transferred:

Load givens — then predict and run

Loading a setup earns no trial credit.

4

♢ DISCOVER — Geometry and Material Are Different

DOK 1 — Recall

Flip all 4 rule cards. Keep the quantities and model conditions clear.

Rule 1

Define resistance

Click to flip

Define resistance

R = V/I at a specified operating point. For an ohmic conductor at constant physical conditions, R is independent of applied V within its ohmic range.

Rule 2

Uniform-wire geometry

Click to flip

Uniform-wire geometry

R = ρL/A. At fixed ρ, R is proportional to L and inversely proportional to cross-sectional A. For a circular wire A = πd²/4; doubling diameter quadruples area.

Rule 3

Material and conditions

Click to flip

Material and conditions

Resistivity has units Ω m and depends on material and conditions such as temperature. It does not depend on wire length or area in this uniform-material model.

∫

Rule 4

Temperature is conditional

Click to flip

Temperature is conditional

Most metals have higher resistance as temperature increases. NTC thermistors decrease resistance with increasing temperature; LDR resistance decreases with increasing illumination. Avoid an all-material temperature rule.

Flip all 4 cards to reveal the rules. 0/4 flipped
5

MISCONCEPTION ATTACK — Destroy the Myths

DOK 2 — Analyze

Choose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.

Myth 1: “Doubling a circular wire’s diameter doubles its cross-sectional area.”

Myth 2: “Every material’s resistance rises when it gets hotter.”

6

✦ THE SECOND “AHA!” — Geometry, Scaling and SI Units

DOK 2 — Apply

Assume uniform wires and unchanged temperature unless stated otherwise.

Progress
0/4
Uniform wire givensMaterial resistivity ρLength LCross-sectional area A+−
Given conditions only; arrows and distances are schematic.

1

Instructor Q1 — Area Change

A wire’s area doubles while length and resistivity stay fixed. What happens to R?

2

Instructor Q2 — Material Property

Which quantity describes the material under specified conditions, rather than the entire component geometry?

3

Instructor Q3 — Uniform Wire

A uniform wire has ρ = 4.0 × 10⁻⁷ Ω m, L = 3 m and A = 2 mm². Find resistance.

Uniform Wire givensρ: 4.0 × 10⁻⁷ Ω mLength: 3 mArea: 2 mm²+−
Given conditions only; arrows and distances are schematic.
Ω
4

Instructor Q4 — Material Resistivity

A uniform wire of length 2 m and area 0.5 mm² has resistance 1.2 Ω. Find resistivity.

Material Resistivity givensResistance: 1.2 ΩLength: 2 mArea: 0.5 mm²+−
Given conditions only; arrows and distances are schematic.
Ω m
7

✎ PRACTICE — Independent Wire Audits

DOK 1–3 — Practice
DOK 1 — Routine

Challenge 1: Calculate Resistance

At a stated fixed temperature, a uniform wire has resistivity 2.4 × 10⁻⁷ Ω m, length 3 m and cross-sectional area 0.8 mm². Find its resistance.

Calculate Resistance givensρ: 2.4 × 10⁻⁷ Ω mLength: 3 mArea: 0.8 mm²+−
Given conditions only; arrows and distances are schematic.
Ω
DOK 2 — Application

Challenge 2: Stretch at Constant Volume

A uniform wire initially has resistance 1.2 Ω and area 1.0 mm². It is stretched uniformly to 2.5 times its original length with its volume and resistivity unchanged. Find its new area and resistance.

Stretch at Constant Volume givensInitial R: 1.2 ΩInitial area: 1.0 mm²Length factor: 2.5Volume unchangedResistivity unchanged+−
Given conditions only; arrows and distances are schematic.
mm²
Ω
DOK 3 — Audit & Justify

Challenge 3: Audit a Wire Report

A circular uniform wire has ρ = 3.0 × 10⁻⁷ Ω m, L = 4 m and A = 0.6 mm². A second wire of the same material and length has twice its diameter at the same temperature. A report says resistivity includes the wire’s length, twice the diameter means twice the area, and warming any material must increase resistance. Find both wire resistances and explain all three errors.

Audit a Wire Report givensρ: 3.0 × 10⁻⁷ Ω mLength: 4 mFirst area: 0.6 mm²Second diameter: ×2Same initial temperature+−
Given conditions only; arrows and distances are schematic.
Ω
Ω
8

☷ CHALLENGE — Increase, Decrease or Unchanged?

DOK 2 — Apply

Increase, Decrease or Unchanged?

Compare resistance with all unmentioned variables fixed and with unchanged resistivity except where explicitly stated.

0 / 6 correct

9

TEACH — The Feynman Technique

DOK 3 — Teach

Your Final Mission: Explain resistance versus resistivity, the effects of length and area, how diameter affects area, and why temperature claims require a named material.

Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.

Type Your Explanation (≥ 3 sentences)

Final reward below

Hidden exam secrets inside — Crest's private notebook.