Skip to lesson
PC

PHYSICS CREST

Global Physics Academy

Mission 10.3 · Current & Drift Speed Separate charge flow rate, carrier drift and signal propagation.
Journey Tracker
Progress
0/10
1

WONDER — The Mystery

Slow Electrons, Rapid Response

Carriers already exist throughout a metal wire. Their average drift can be small while the electromagnetic disturbance following a switch change propagates much faster. A lamp need not wait for one electron to drift from the source to it. Signal propagation is fast but finite, and its speed depends on circuit geometry and materials.

Current measurementCharge crosses a sectionInterval measuredMetal electron carriers+−
Given conditions only; arrows and distances are schematic.

Model: Use steady current magnitude I in a uniform metal segment, electron number density n, cross-sectional area A and charge magnitude e = 1.60 × 10⁻¹⁹ C. Drift speed is the small average directed motion superposed on microscopic random motion. Conventional current is opposite to electron drift.

2

PREDICT — Commit to Your Answer

DOK 2 — Predict

18 C passes through a wire cross-section in 6 s. What is the average current magnitude?

Measurement givensCharge passed: 18 CInterval: 6 s+−
Given conditions only; arrows and distances are schematic.

Commit to both a prediction and a reason before revealing the explanation.

Step 1: Pick your answer.

STOP! Before revealing — why did you pick that?

3

▶ PLAY — Live Electron Drift & Charge Counter

DOK 2 — Investigate

Predict, measure and compare

Compare two current magnitudes at the same area and density, then change only area. Complete three runs. Watch representative electrons drift opposite conventional current and the charge-through-section counter increase.

A uniform steady metal segment is 4 mm long, drawn at 100 pixels per mm. I, area A in mm² and density n in units of 10²⁸ m⁻³ are selectable. vd = I/(nAe), using e = 1.60 × 10⁻¹⁹ C and 1 mm² = 10⁻⁶ m². A run lasts 12 model seconds over 8 real seconds. Representative dots move left at the calculated average drift speed; the conventional-current arrow points right. Dots wrap at the viewing-window boundaries, not at physical wire ends. Only selected representative carriers are shown, with random microscopic motion omitted; Q = It is continuous and not counted from the few dots. The circuit is already in steady state, so this lab does not animate switching or signal propagation.

Use the labelled readouts.

Status: Ready

Playback: 8 real seconds per run; read elapsed physical model time. Pause or Step for measurements.

Measurements

Elapsed model time:
Current magnitude:
Electron drift speed:
Average drift distance:
Charge passed through a section:
Elementary charges per second:
Carrier and conventional directions:

Load givens — then predict and run

Loading a setup earns no trial credit.

4

♢ DISCOVER — Three Quantities, Three Meanings

DOK 1 — Recall

Flip all 4 rule cards. Keep the quantities and model conditions clear.

Rule 1

Charge flow rate

Click to flip

Charge flow rate

Iaverage = ΔQ/Δt; steady I gives Q = It. 1 A = 1 C/s. Current measures charge crossing a section, not speed in m/s.

Rule 2

Microscopic drift

Click to flip

Microscopic drift

I = nAevd for one electron carrier type, using magnitudes. More area or carriers can support the same current with smaller drift speed. Area is cross-sectional, not surface area.

Rule 3

Direction convention

Click to flip

Direction convention

Conventional current has the direction of positive-charge flow. In an external metal wire, electrons drift opposite it. Current is not a vector, although we assign its direction and a sign in a branch.

∫

Rule 4

Signal is different

Click to flip

Signal is different

A field disturbance propagates rapidly but finitely. It changes local carrier motion as it reaches each location. Neither signal speed nor the random microscopic speed is the small average drift speed.

Flip all 4 cards to reveal the rules. 0/4 flipped
5

MISCONCEPTION ATTACK — Destroy the Myths

DOK 2 — Analyze

Choose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.

Myth 1: “A current of 2 A means each electron moves at 2 m/s.”

Myth 2: “A lamp waits for an electron to travel from the switch to it.”

6

✦ THE SECOND “AHA!” — Rates, Areas and Directions

DOK 2 — Apply

Use charge magnitudes and the stated steady conditions.

Progress
0/4
Current measurementCharge crosses a sectionInterval measuredMetal electron carriers+−
Given conditions only; arrows and distances are schematic.

1

Instructor Q1 — Direction

Conventional current points right in a metal wire. Which way is electron drift?

2

Instructor Q2 — Area Comparison

Steady I, n and carrier charge stay fixed while area doubles. What happens to drift speed?

3

Instructor Q3 — Charge Rate

24 C passes a section in 8 s. Find average current.

Charge Rate givensCharge: 24 CInterval: 8 s+−
Given conditions only; arrows and distances are schematic.
A
4

Instructor Q4 — Charge Passed

A steady current of 0.65 A flows for 20 s. Find charge passed through one section.

Charge Passed givensCurrent: 0.65 AInterval: 20 s+−
Given conditions only; arrows and distances are schematic.
C
7

✎ PRACTICE — Independent Current Audits

DOK 1–3 — Practice
DOK 1 — Routine

Challenge 1: Measured Current

A sensor records 18 C passing through a cross-section in 7.5 s. Find average current magnitude.

Measured Current givensCharge: 18 CInterval: 7.5 s+−
Given conditions only; arrows and distances are schematic.
A
DOK 2 — Application

Challenge 2: A Uniform Metal

A wire carries steady current 1.6 A. It has electron density 8.0 × 10²⁸ m⁻³ and cross-sectional area 1.25 mm². Use electron charge magnitude 1.60 × 10⁻¹⁹ C. Find drift speed and charge passing a section in 12 s.

A Uniform Metal givensCurrent: 1.6 An: 8.0 × 10²⁸ m⁻³Area: 1.25 mm²e: 1.60 × 10⁻¹⁹ CInterval: 12 s+−
Given conditions only; arrows and distances are schematic.
m/s
C
DOK 3 — Audit & Justify

Challenge 3: Audit the Rapid-Response Report

A metal wire carries 3.2 A to the right for 15 s. Electron density is 8.0 × 10²⁸ m⁻³, cross-sectional area 2.5 mm² and charge magnitude 1.60 × 10⁻¹⁹ C. A report says current means electron speed of 3.2 m/s, electrons drift right, and a lamp must wait for an electron to drift from the switch before responding. Find charge passed and drift speed, and explain all three errors.

Audit the Rapid-Response Report givensCurrent: 3.2 A rightn: 8.0 × 10²⁸ m⁻³Area: 2.5 mm²e: 1.60 × 10⁻¹⁹ CInterval: 15 s+−
Given conditions only; arrows and distances are schematic.
C
m/s
8

☷ CHALLENGE — Rate, Drift or Signal?

DOK 2 — Apply

Rate, Drift or Signal?

Classify the stated physical quantity rather than its numerical size.

0 / 6 correct

9

TEACH — The Feynman Technique

DOK 3 — Teach

Your Final Mission: Distinguish current from electron drift and signal propagation. Include conventional direction, area and carrier density, and why local carriers can respond rapidly.

Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.

Type Your Explanation (≥ 3 sentences)

Final reward below

Hidden exam secrets inside — Crest's private notebook.