WONDER — The Mystery
What Does a Thermometer Measure?
A thermometer responds to a calibrated property after reaching thermal equilibrium. For a classical ideal gas, the average translational kinetic energy tells us its absolute temperature. Do twice the Celsius reading and twice the particle speed mean the same thing?
Model: Use positive Kelvin temperature for classical ideal-gas ratios. Mean translational kinetic energy = 3kBT/2 and vrms = √(3kBT/m), with kB = 1.380649 × 10⁻²³ J/K. Internal energy includes microscopic kinetic and potential contributions in general. Celsius and Fahrenheit are offset scales. The classical zero-K limit does not imply matter disappears or all real quantum motion stops.
PREDICT — Commit to Your Answer
DOK 2 — PredictThe same classical ideal gas changes from 300 K to 600 K. What happens to its root-mean-square particle speed?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
Average translational kinetic energy doubles because it is proportional to T. Since kinetic energy depends on speed squared, vrms increases by √2, not by 2.
▶ PLAY — Live Ideal-Gas Particle Speedometer
DOK 2 — InvestigatePredict, measure and compare
Complete two observations differing only in Kelvin temperature, then a third differing only in particle mass from one of that pair. Watch particles reflect from the walls and compare their rms speeds and mean translational energies.
An ideal-gas box is 0.30 m wide and 0.20 m high. Twenty-four noninteracting schematic markers project a deterministic three-dimensional velocity sample onto the display. Their sample mean-square speed is normalized to 3kBT/m. Wall reflections are elastic; marker-marker collisions are omitted. This finite sample illustrates kinetic scaling, not a full Maxwell–Boltzmann distribution. The 0.002 s physical observation plays over 8 real seconds at 900 pixels/m. T = 0 illustrates the classical limiting model only; real gases do not remain classical ideal gases down to zero K. Particle masses use 1 u = 1.66053906660 × 10⁻²⁷ kg.
Status: Ready
Playback: 8 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Temperature, Energy and Scales
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Absolute readings and differences
Click to flip
Absolute readings and differences
T/K = θ/°C + 273.15. θF = 1.8θC + 32. A temperature change of 1 K equals a change of 1°C or 1.8°F; offsets cancel in differences.
Rule 2
Use Kelvin for thermal ratios
Click to flip
Use Kelvin for thermal ratios
Twice a Celsius reading is not twice absolute temperature. Convert to Kelvin before taking ratios in gas and kinetic equations. Kelvin uses K, without a degree sign.
Rule 3
Energy and speed have different scaling
Click to flip
Energy and speed have different scaling
For a classical ideal gas, ⟨KEtrans⟩ = 3kBT/2 and vrms = √(3kBT/m). Equal temperature gives equal average translational energy, even for different masses; heavier particles have lower rms speed.
Rule 4
Temperature is not heat
Click to flip
Temperature is not heat
Temperature is a thermal-state variable. Heat is energy transferred because of a temperature difference, measured in joules. Internal energy is microscopic energy associated with the system; total energy also depends on its size and substance.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “Doubling an ideal gas from 20°C to 40°C doubles its average translational kinetic energy.”
Correct — the claim is false.
False. Those readings are 293.15 K and 313.15 K. Their ratio is about 1.068, not 2.
Myth 2: “At absolute zero matter vanishes and all real microscopic motion must stop.”
Correct — the claim is false.
False. Zero kelvin is the lower thermodynamic limit. The classical ideal-gas translational energy tends to zero, but matter persists and real quantum systems can retain zero-point motion.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Readings, Changes and Molecular Motion
DOK 2 — ApplyUse the absolute scale for ratios and keep rms speed separate from average energy.
Instructor Q1 — Equal Temperatures
Two ideal gases at the same Kelvin temperature have particle masses m and 4m. Which statement is correct?
Instructor Q2 — A Temperature Change
A sensor rises from 15°C to 25°C. What is the size of this change?
Instructor Q3 — A Kelvin Reading
A calibrated sensor reads −65.0°C. Find its absolute temperature.
Instructor Q4 — A Celsius Reading
A calibrated sensor reads 325.0 K. Find its Celsius reading.
4/4 — Instructor Questions Completed
Equal temperature does not require equal particle speeds or equal total internal energies.
✎ PRACTICE — Independent Temperature and Kinetic Cases
DOK 1–3 — PracticeChallenge 1: A Cold Chamber
A calibrated chamber thermometer reads −42.0°C. Give the equivalent Kelvin and Fahrenheit readings.
Step-by-Step Solution
T = −42.0 + 273.15 = 231.15 K. Fahrenheit reading = 1.8(−42.0) + 32 = −43.6°F.
Challenge 2: A Warmer Ideal Gas
The same classical ideal gas warms from 127°C to 527°C. Determine the final-to-initial ratios of mean translational kinetic energy and rms speed. Particle mass is unchanged.
Step-by-Step Solution
The temperatures are 400.15 K and 800.15 K. Energy ratio = 800.15/400.15 = 1.99963. Speed ratio = √(800.15/400.15) = 1.41408. Multiplying a Celsius reading does not preserve an absolute temperature ratio.
Challenge 3: Audit a Particle Report
Gas A is at 26.85°C and gas B is at 600 K. B has particles with four times the mass of A. Both follow the classical ideal-gas model. A report divides 600 by 26.85 for the energy ratio, says the energy and rms-speed ratios must be identical, and claims equal temperature would imply equal total internal energy for any two samples. Find A’s Kelvin temperature, B-to-A mean translational energy ratio and B-to-A rms-speed ratio. Explain all three report errors.
Step-by-Step Solution
A is 300 K. B-to-A mean translational energy ratio = 600/300 = 2. The rms-speed ratio = √[(600/300)(mA/mB)] = √(2/4) = 0.707107.
Use Kelvin rather than dividing mixed or offset-scale readings. Speed has square-root dependence and also depends on mass. Equal temperature gives equal mean translational energy in this ideal-gas model, not necessarily equal total internal energy: particle number and internal degrees of freedom matter.
☷ CHALLENGE — Sort Readings, Changes and Energy
DOK 2 — ApplySort Readings, Changes and Energy
Place each statement with its physical meaning.
0 / 6 correct
Physics Insight
Choose the physical quantity before choosing the conversion.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain what a thermometer measures and how temperature, heat and internal energy differ. Explain why an ideal-gas energy ratio uses Kelvin and why equal-temperature gases can have different rms speeds.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 8.1 — Temperature & the Particle World
Measure a thermal state. Compare Kelvin temperatures and particle speeds.
1. Temperature measurements
A thermometer reaches thermal equilibrium with what it measures and responds to a calibrated thermometric property, such as liquid density/volume, metal resistance or thermocouple e.m.f. Thermodynamic temperature does not depend on the chosen thermometric substance.
T/K = θ/°C + 273.15; θF = 1.8θC + 32
Kelvin uses K, never °K. For differences, ΔT/K = Δθ/°C and ΔθF = 1.8ΔθC. Offsets apply to readings, not to changes.
2. Thermal state, transfer and internal energy
Temperature characterizes thermal state. Heat is energy crossing a system boundary because of temperature difference; it is not a substance stored inside an object. Internal energy is associated with microscopic random kinetic energies and interactions. Equal temperatures do not guarantee equal total internal energies.
3. The classical ideal-gas link
⟨KEtrans⟩ = 3kBT/2 = m⟨v²⟩/2; vrms = √⟨v²⟩ = √(3kBT/m)
Use T in Kelvin, m in kg and kB = 1.380649 × 10⁻²³ J/K. Rms speed is not the arithmetic mean speed. At fixed particle mass, mean translational energy is proportional to T and rms speed to √T. At fixed T, vrms is proportional to 1/√m. Doubling rms speed requires four times Kelvin temperature.
A Maxwell–Boltzmann speed distribution has a range of speeds. Raising temperature broadens it and moves characteristic speeds upward. Its area remains the particle count or normalized probability. The live finite deterministic sample is a schematic kinetic scaling illustration, not a plotted Maxwell–Boltzmann distribution.
4. Absolute zero
0 K = −273.15°C = −459.67°F is the lower limit of the thermodynamic Kelvin scale used here. Do not infer that matter disappears or all microscopic motion literally stops. A classical ideal-gas translational model tends to zero mean energy; real gases cease to obey this classical model at sufficiently low temperatures and quantum systems may retain zero-point motion.
5. Independent worked cases
−42.0°C is 231.15 K and −43.6°F. Heating the same ideal gas from 127°C to 527°C gives Kelvin readings 400.15 and 800.15: energy ratio 1.99963 and rms-speed ratio 1.41408.
In the report audit, A is 300 K. B has twice A’s mean translational energy but four times its particle mass, so B’s rms speed is only √(1/2) of A’s. Total internal energy also depends on number of particles and internal degrees of freedom; the 3NkBT/2 expression describes a monatomic ideal gas.
6. Live box and fair comparisons
The box is 0.30 m by 0.20 m. Twenty-four markers project a deterministic three-dimensional velocity sample normalized so its sample mean-square speed is exactly 3kBT/m. The display uses 900 pixels/m and elastic wall reflections. Marker collisions are omitted. Two physical milliseconds play over eight real seconds. For the baseline 300 K and 20 u particles, vrms is about 611.7 m/s and mean translational energy is 6.21292 × 10⁻²¹ J.
Compare T at fixed mass, then mass at fixed T. Run, Pause, Step and Reset act on the same physical clock. Loading a preset earns no credit; three matched completed observations unlock the next stage. Reload resumes paused; reduced-motion Run shows the completed state.
7. Course scope
Cambridge A Level 9702 topics 14.2 and 15.3 cover thermometric properties, Celsius/Kelvin conversion, absolute zero and kinetic theory. AP Physics 2 topic 9.1 covers mean kinetic energy and rms speed; Fahrenheit conversion is supporting enrichment. This thermal lesson is not assigned to AP Physics 1.
✓ Crest’s Checklist
- I convert readings using the correct offsets.
- I distinguish readings from temperature changes.
- I use Kelvin for absolute-temperature ratios.
- I separate mean translational energy from total internal energy.
- I include particle mass when comparing rms speeds.
- I explain the limits of the classical zero-K model.
— Crest ☆ “Measure a thermal state. Compare Kelvin temperatures and particle speeds.”
Mission 8.1 Complete! · All 10 levels cleared · PHYSICS CREST
★ Temperature & the Particle World Master
Equal temperature does not require equal particle speeds or equal total internal energies.