Skip to lesson
PC

PHYSICS CREST

Global Physics Academy

Mission 7.8 · Sink or Float? Compare average density. Distinguish motion from equilibrium.
Journey Tracker
Progress
0/10
1

WONDER — The Mystery

A Hollow Hull Changes the Excluded Volume

A dense solid can sink while a watertight hollow object of the same mass floats. Its material density has not changed, but its water-excluding volume has. How much must a floating object submerge to support its full weight?

Flotation modelWatertight rigid objectUniform liquidNo support or tether
Given conditions only; arrows and distances are schematic.

Model: Rigid objects with full fluid contact, uniform fluid density, fixed g and negligible air buoyancy or surface tension. Use total mass divided by the relevant external water-excluding volume for average density. The density rule describes ideal unsupported buoyancy; real stability, flooding and additional forces need separate checks. Equilibrium fraction is a volume fraction, not a universal height fraction for arbitrary shapes.

2

PREDICT — Commit to Your Answer

DOK 2 — Predict

A rigid uniform object of average density 600 kg/m³ floats freely at rest in liquid of density 1000 kg/m³. Neglect air buoyancy and surface tension. What fraction of its volume is below the surface?

Floating-equilibrium givensObject: 600 kg/m³Liquid: 1000 kg/m³Freely floating at rest
Given conditions only; arrows and distances are schematic.

Commit to both a prediction and a reason before revealing the explanation.

Step 1: Pick your answer.

STOP! Before revealing — why did you pick that?

3

▶ PLAY — Live Release with Buoyancy, Drag and Contact

DOK 2 — Investigate

Predict, measure and compare

Compare two object densities while keeping fluid density and starting depth fixed. Then change only fluid density from one of that pair. Complete three runs. Watch rising, partial submersion, neutral release or sinking; inspect actual position, velocity and force balance.

A 0.200 m rigid cube starts fully submerged at rest, then is released. Downward depth and velocity are positive. Uniform fluid, fixed surface and g = 9.8 m/s² are used. Its liquid-displaced volume is face area times submerged height, clipped from zero to the full side. A specified linear drag force is −cv with c = 80 N·s/m. This phenomenological damping is a motion extension, not an ideal-fluid viscosity claim. Added mass, waves, air buoyancy and surface tension are neglected. A porous support rack at bottom-face depth 1.20 m preserves fluid contact below the cube and stops a sinking cube inelastically; rack reaction then joins the balance. RK4 uses steps no larger than 0.002 s. Eight physical seconds play over eight real seconds; depth scale is 170 pixels/m. A finite run need not reach exact floating equilibrium.

Use the labelled readouts.

Status: Ready

Playback: 8 real seconds per run; read elapsed physical model time. Pause or Step for measurements.

Measurements

Elapsed physical time:
Actual bottom-face depth:
Actual downward velocity:
Actual submerged volume fraction:
Actual buoyancy:
True gravitational weight:
Signed downward drag force:
Upward rack reaction:
Signed downward resultant:
Predicted free equilibrium volume fraction:

Load givens — then predict and run

Loading a setup earns no trial credit.

4

♢ DISCOVER — Density, Displacement and Motion

DOK 1 — Recall

Flip all 4 rule cards. Keep the quantities and model conditions clear.

Rule 1

Compare average densities

Click to flip

Compare average densities

When fully submerged and otherwise unsupported, B/W = ρfluid/ρobject. A less dense rigid object accelerates upward from rest; a denser one accelerates downward. Equal densities give neutral buoyancy under the model.

Rule 2

Floating equilibrium is a balance

Click to flip

Floating equilibrium is a balance

For free rest at the surface, B = W and Vsub/Vtotal = ρobject/ρfluid. Use this fraction only when it is no greater than one and no extra vertical forces act.

Rule 3

Zero acceleration is not zero velocity

Click to flip

Zero acceleration is not zero velocity

Neutral buoyancy means the buoyancy-weight resultant is zero. An object released at rest can remain still; an already moving object need not instantly stop. Drag or contact changes the balance.

∫

Rule 4

Hulls and ice need conditions

Click to flip

Hulls and ice need conditions

A watertight hull excludes water and can lower average density without changing material density. In the ideal equal-density freshwater model, floating ice melt replaces its displaced volume. Different melt/liquid densities give a correction; hull stability and flooding are separate issues.

Flip all 4 cards to reveal the rules. 0/4 flipped
5

MISCONCEPTION ATTACK — Destroy the Myths

DOK 2 — Analyze

Choose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.

Myth 1: “Floating means gravity stopped acting, and buoyancy and weight are a third-law pair.”

Myth 2: “Neutral buoyancy guarantees any moving object immediately becomes stationary.”

6

✦ THE SECOND “AHA!” — Flotation Conditions

DOK 2 — Apply

Use equilibrium only when the stated forces and motion justify it.

Progress
0/4
Flotation modelWatertight rigid objectUniform liquidNo support or tether
Given conditions only; arrows and distances are schematic.

1

Instructor Q1 — The Relevant Density

For a watertight hollow rigid object, which density is relevant to maximum available liquid buoyancy?

2

Instructor Q2 — Balanced Forces

Weight and buoyancy balance on one floating object at rest. Are they a Newton’s-third-law pair?

3

Instructor Q3 — Fresh Floating Fraction

A free rigid object of average density 800 kg/m³ floats at rest in liquid of density 1250 kg/m³. Find the percentage of its volume below the surface.

Density givensObject: 800 kg/m³Liquid: 1250 kg/m³At free equilibrium
Given conditions only; arrows and distances are schematic.
%
4

Instructor Q4 — Density from Flotation

A free object floats at rest with 75% of its volume submerged in liquid of density 1200 kg/m³. Find its average density.

Measured-fraction givensSubmerged volume: 75%Liquid: 1200 kg/m³At free equilibrium
Given conditions only; arrows and distances are schematic.
kg/m³
7

✎ PRACTICE — Independent Floating and Sinking Cases

DOK 1–3 — Practice
DOK 1 — Routine

Challenge 1: Submerged and Exposed Volumes

An object of average density 720 kg/m³ floats freely at rest in liquid of density 1200 kg/m³. Neglect air buoyancy and surface tension. Find the submerged and above-surface percentages of its volume.

Equilibrium givensObject: 720 kg/m³Liquid: 1200 kg/m³Free floating at rest
Given conditions only; arrows and distances are schematic.
%
%
DOK 2 — Application

Challenge 2: A Sealed Rigid Hull

A sealed rigid hull has total mass 4.50 kg and maximum water-excluding volume 0.00600 m³. It floats at rest in water of density 1000 kg/m³; g = 10 m/s². Neglect air buoyancy and keep hull volume fixed. Find its average density, current submerged volume and extra mass that brings it just to full submersion. This last value is an ideal threshold, not a recommended loading margin.

Hull-load givensTotal mass: 4.50 kgExcluded max: 0.006 m³Water: 1000 kg/m³g: 10 m/s²; sealed
Given conditions only; arrows and distances are schematic.
kg/m³
m³
kg
DOK 3 — Audit & Justify

Challenge 3: Audit a Neutral-Buoyancy and Ice Report

A fully submerged sealed rigid object has volume 0.0040 m³ and density 1000 kg/m³ in liquid of density 1000 kg/m³; g = 10 m/s². At the instant considered it moves downward at 0.30 m/s and drag and other forces are absent. A separate 0.200 kg ice sample floats in liquid of density 1050 kg/m³ and melts to liquid of density 1000 kg/m³ with no mass loss or mixing-volume change. A report says the neutral object must instantly stop, its balanced weight and buoyancy are a third-law pair, and the floating ice must cause exactly zero volume change regardless of liquid density. Find object buoyancy, its instantaneous downward acceleration and the melt volume minus its former displaced volume. Explain all three errors.

Two-system audit givensObject: 0.0040 m³ρ object = fluid: 1000Speed: 0.30 m/s downIce: 0.200 kg; g: 10ρ liquid/melt: 1050/1000
Given conditions only; arrows and distances are schematic.
N
m/s²
m³
8

☷ CHALLENGE — Sort Equilibrium, Motion and Model Limits

DOK 2 — Apply

Sort Equilibrium, Motion and Model Limits

Classify each statement by the issue it addresses.

0 / 6 correct

9

TEACH — The Feynman Technique

DOK 3 — Teach

Your Final Mission: Explain how a rigid low-average-density object rises from full submersion and approaches a partially submerged floating equilibrium. Distinguish the actual motion from the equilibrium fraction, explain neutral buoyancy, and give one condition needed for the melting-ice volume result.

Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.

Type Your Explanation (≥ 3 sentences)

Final reward below

Hidden exam secrets inside — Crest's private notebook.