WONDER — The Mystery
A Zero Reading Is Not Always a Vacuum
A differential gauge reads zero when its two connected pressures match. An absolute-pressure instrument instead references vacuum. How can a zero atmospheric-gauge reading coexist with a nonzero absolute pressure? How can a liquid column compare pressures above or below atmosphere?
Model: Static readings use hydrostatic equilibrium and a stated reference. A gauge reading is a signed pressure difference; an absolute instrument uses a vacuum reference. Not every pressure instrument reads atmospheric gauge pressure. U-tube examples have equal-area arms, negligible gas density and capillary effects, and one uniform manometer liquid. The live transient additionally includes stated inertia and damping; height alone measures static pressure only after settling.
PREDICT — Commit to Your Answer
DOK 2 — PredictAn explicitly atmospheric-gauge instrument reads −12.0 kPa while its atmospheric reference is 98.0 kPa absolute. What is the measured gas’s absolute pressure?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
Pabsolute = Preference + Pgauge = 98.0 − 12.0 = 86.0 kPa. Its absolute pressure remains positive.
▶ PLAY — Live U-Tube: Pressure Step and Settling Columns
DOK 2 — InvestigatePredict, measure and compare
Complete two runs with different gas gauge-pressure steps but the same liquid density and atmosphere. Then change only density from one of that pair. Watch the two liquid levels move in opposite directions and settle. Compare the imposed gauge difference with the height-based static estimate during motion and near rest.
Left arm connects to regulated gas; right arm to atmosphere. The uniform liquid occupies an equal-area U-tube with effective moving length ℓ = 1.6 m. g = 9.8 m/s². At t = 0 a signed gas-pressure step is applied while the liquid is initially level and at rest. Fluid inertia and a supplied linear resistance produce critical damping: ωn = √(2g/ℓ), with damping rate 2ωn. Left downward displacement x follows x = xeq[1 − (1 + ωn t)e^(−ωn t)], where xeq = ΔP/(2ρg). Right level rises by the same x, conserving liquid volume. The measurement is 4 physical seconds over 8 real seconds and ends nearly settled, not at an artificially clamped exact equilibrium. Height difference is 2x; during motion ρg(2x) differs from imposed ΔP because inertia and resistance also balance force. The scale is 300 pixels/m. Damping is explicitly included in this instrument model, unlike an ideal zero-viscosity flow model.
Status: Ready
Playback: 8 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Imposed Gauge Pressure and Static Height Estimate
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — References, Heights, Signs and Units
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Identify the instrument
Click to flip
Identify the instrument
An atmospheric gauge reads Pgas − Patm. An absolute instrument references vacuum. A differential instrument compares its two specified connections. A reading’s reference cannot be inferred from the word “instrument” alone.
Rule 2
Signed U-tube difference
Click to flip
Signed U-tube difference
At static equilibrium, Pgas − Preference = ρg(zreference − zgas). Gas pushing its connected level lower gives positive gauge pressure. Its connected level higher gives negative gauge pressure. Use the difference between levels, not one arm’s movement.
Rule 3
Barometer boundary pressure
Click to flip
Barometer boundary pressure
For a static column, Patm = Ptop + ρgh. A near-vacuum top gives the usual approximation Patm ≈ ρgh; trapped gas or vapor pressure can supply a nonzero top correction. Height is vertical.
Rule 4
Height is not automatically a pressure unit
Click to flip
Height is not automatically a pressure unit
A liquid-column height in mm is a length. mmHg is a pressure unit, approximately 133.3 Pa per mmHg. A 180 mm water or oil column cannot simply be relabeled 180 mmHg. Use density, g and height to find pressure first.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “Every pressure instrument reports pressure above atmosphere.”
Correct — the claim is false.
False. Atmospheric gauges, absolute-pressure sensors and differential instruments have different references. Identify the specific instrument and its connected reference.
Myth 2: “Any liquid column 760 mm high equals one atmosphere.”
Correct — the claim is false.
False. Hydrostatic pressure depends on density and g as well as height. mmHg is a pressure unit tied to a conventional mercury-column definition, not a generic label for every liquid’s millimeter height.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Signed Readings and Instrument Boundaries
DOK 2 — ApplyUse the stated reference rather than assuming every gauge has the same type or sign.
Instructor Q1 — Zero Atmospheric-Gauge Reading
An atmospheric gauge reads zero. Which statement follows?
Instructor Q2 — Which Side Has More Pressure?
A settled equal-area U-tube has gas on the left and atmosphere on the right. The left liquid level is higher than the right. Which comparison is correct?
Instructor Q3 — A Positive Gauge Reading
An atmospheric gauge reads +160 kPa; local atmosphere is 98.0 kPa absolute. Find gas absolute pressure in kPa.
Instructor Q4 — A Negative Gauge Reading
An atmospheric gauge reads −8.0 kPa; the reference atmosphere is 100 kPa absolute. Find gas absolute pressure in kPa.
4/4 — Instructor Questions Completed
A gauge reading is a signed comparison. Read its reference and check whether the fluid has settled before using a static column relation.
✎ PRACTICE — Independent Gauge and Column Cases
DOK 1–3 — PracticeChallenge 1: A Reduced-Pressure Chamber
An explicitly atmospheric-gauge sensor on a chamber reads −15.0 kPa. Its atmospheric reference is 98.0 kPa absolute. Find the chamber’s absolute pressure.
Step-by-Step Solution
Absolute pressure = 98.0 + (−15.0) = 83.0 kPa. A negative atmospheric-gauge value does not mean negative absolute pressure.
Challenge 2: A Barometer with Residual Gas
A static barometer column has liquid density 13600 kg/m³ and vertical height 0.700 m above its reservoir surface. Trapped gas above the column has absolute pressure 5.00 kPa. Take g = 10 m/s² and neglect capillarity. Find the reservoir atmosphere’s absolute pressure. Then find the column height if the top gas were removed to a perfect-vacuum idealization at the same atmospheric pressure and density.
Step-by-Step Solution
Column pressure difference = 13600(10)(0.700) = 95200 Pa = 95.2 kPa. Atmosphere = 5.00 + 95.2 = 100.2 kPa absolute. With top pressure zero, new height = 100200/(13600 × 10) = 0.736765 m, about 0.737 m.
Challenge 3: Audit a Negative Manometer Reading
A settled equal-area U-tube contains liquid of density 1200 kg/m³. Gas connects to the left arm; the right arm is open to an atmosphere of 96.0 kPa absolute. The left liquid level is 0.180 m above the right. Each arm has shifted 0.090 m from its initial equal level. Take g = 10 m/s² and use 1 mmHg ≈ 133.3 Pa. A report makes the gas gauge reading positive, uses one arm’s 0.090 m travel as the level difference, and labels the liquid’s 180 mm height directly as 180 mmHg. Find signed gas gauge pressure in kPa, gas absolute pressure in kPa and equivalent signed gauge pressure in mmHg. Explain all three errors.
Step-by-Step Solution
The gas-side level is higher, so gas pressure is lower than atmosphere. Signed gauge pressure = −1200(10)(0.180) = −2160 Pa = −2.160 kPa. Absolute pressure = 96.0 − 2.160 = 93.840 kPa.
Equivalent gauge pressure = −2160/133.3 ≈ −16.20 mmHg. The actual level difference is 0.180 m, twice either arm’s 0.090 m shift. The sign follows the pressure ordering. A 180 mm column of this liquid is not 180 mmHg: convert its hydrostatic pressure using the given pressure-unit factor.
☷ CHALLENGE — Sort the Reference, the Sign and the Units
DOK 2 — ApplySort the Reference, the Sign and the Units
Classify each statement by the key instrument-reading decision.
0 / 6 correct
Physics Insight
Instrument reference, equilibrium condition and unit meaning are three independent checks.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain why zero on an atmospheric gauge does not mean a vacuum, why a higher gas-side U-tube level means negative gauge pressure, and why millimeters of an arbitrary liquid cannot be called mmHg.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 7.4 — Pressure Gauges
Identify the instrument’s reference and the column sign.
1. A reading needs a reference
Pgauge = Pgas − Preference; Pabsolute = Preference + Pgauge
An atmospheric gauge uses local atmosphere. An absolute sensor uses a vacuum reference. A differential instrument compares two specified connections. The word “reading” does not prove a value is gauge pressure. Gauge readings are useful signed comparisons, not false or incomplete measurements.
Zero atmospheric gauge means gas pressure equals atmosphere. Negative gauge means below atmosphere, with positive absolute pressure still possible. For the chamber case, 98.0 − 15.0 = 83.0 kPa absolute.
2. A settled U-tube
Pgas − Preference = ρg(zreference − zgas)
Use one uniform liquid, hydrostatic equilibrium and the same horizontal comparison level. Neglect gas density and capillary effects for these examples. Higher pressure depresses its connected level. A higher gas-side level means lower gas pressure. Use the vertical difference between levels, not the movement of just one arm.
In equal-area arms, one side rises as the other falls by the same distance, conserving volume. This equal-displacement rule changes if arm areas differ, while the static pressure-height relation remains valid under its assumptions.
3. Barometer boundary pressure
Patmosphere = Ptop + ρgh
The usual ρgh approximation neglects top gas or vapor pressure and capillarity. A column top is not automatically a perfect vacuum. The residual-gas case gives 95.2 kPa column difference plus 5.00 kPa top pressure, totaling 100.2 kPa atmosphere. Removing that top gas increases the equilibrium height at the same atmosphere.
Different instruments can use hydrostatics for different jobs. A U-tube often measures a pressure difference; a barometer measures atmosphere against a low-pressure top. Their shapes do not make the physics unrelated, and not every manometer must be open to atmosphere.
4. Pressure units versus column length
1 atm is defined as 101325 Pa and 1 bar as 100000 Pa. 1 torr is 1/760 of a standard atmosphere; mmHg is approximately 133.3 Pa. A physical mercury column’s exact height also depends on density, temperature and local g. A supplied rounded conversion is sufficient for the assessment.
A length in mm is not a pressure. First use liquid density, g and vertical height to find the column pressure, then convert the pressure if needed. In the report, the gauge difference is −2160 Pa, equivalent to about −16.20 mmHg, even though this liquid’s actual level difference is 180 mm.
5. Read the sign before adding the reference
The report’s left gas-side level is higher. That gives negative gauge pressure, −2.160 kPa, and absolute pressure 96.0 − 2.160 = 93.840 kPa. Its full level difference is 0.180 m, not one arm’s 0.090 m shift. These are separate sign, geometry and unit errors.
A pressure difference can exert a net force on a wall. Cooling and condensation can lower a sealed or submerged-mouth container’s internal pressure; remaining gas and vapor need not disappear completely. Whether a container collapses depends on its strength and geometry as well as the pressure difference. Do not claim every tire or vessel must collapse merely because pressure falls.
6. The actual moving-column model
The equal-area U-tube starts level and at rest, and receives a regulated signed pressure step. Effective moving liquid length is 1.6 m. Fluid inertia and supplied linear resistance make the model critically damped, with natural rate √(2g/ℓ). The displacement curve is the analytic solution of this stated force-balance model, not an arbitrary animation-progress scale.
At every instant, applied pressure difference balances hydrostatic, inertial and resistance terms. During motion, ρg times the level difference alone is only a static estimate. The display keeps imposed pressure, static estimate and their residual separate. The heights conserve liquid volume and move in opposite directions, including negative-pressure runs.
The measurement ends after 4 physical seconds, nearly settled. The small residual is retained rather than forcing an exact final equilibrium. Eight real seconds display the run; height scale is 300 pixels/m. Compare two pressure steps, then density, with other controls fixed. Pause, step and reset inspect the same state; three matched completed runs unlock the next stage.
7. Course scope
AP Physics 1 topic 8.2 supplies gauge and absolute pressure; instrument examples apply that physics. Cambridge AS Level 9702 topic 4.3 supplies hydrostatic pressure differences; barometer and manometer names are applications rather than additional named requirements. The damped transient is supplied for faithful live motion; its differential equation is not a required memorized result.
✓ Crest’s Checklist
- I identify the instrument’s pressure reference.
- I keep negative gauge readings signed.
- I check for static equilibrium before using a column height alone.
- I use the full vertical level difference.
- I include top pressure in a barometer when needed.
- I distinguish physical mm height from the mmHg pressure unit.
- I add the signed gauge value to the stated reference.
— Crest ☆ “Identify the instrument’s reference and the column sign.”
Mission 7.4 Complete! · All 10 levels cleared · PHYSICS CREST
★ Master of Pressure Gauges
A gauge reading is a signed comparison. Read its reference and check whether the fluid has settled before using a static column relation.