Skip to lesson
PC

PHYSICS CREST

Global Physics Academy

Mission 7.10 · Bernoulli’s Principle Balance pressure, speed and height along a valid streamline.
Journey Tracker
Progress
0/10
1

WONDER — The Mystery

Pressure Can Trade with Speed and Height

Along a steady ideal streamline, greater speed at the same height corresponds to lower static pressure. What changes if the fluid also descends? Why can a fast jet have atmospheric static pressure rather than automatically lower pressure than all nearby slow air?

Ideal streamline modelSteady; incompressibleNegligible viscosityNo pump between points
Given conditions only; arrows and distances are schematic.

Model: Steady incompressible inviscid flow along one streamline, with no pump/turbine work or dissipative loss between compared points. Bernoulli conserves pressure plus kinetic and gravitational energy per volume. Use a common pressure reference and a common elevation datum. Comparing unrelated flows needs additional information; faster fluid does not universally mean lower static pressure.

2

PREDICT — Commit to Your Answer

DOK 2 — Predict

A steady incompressible inviscid flow narrows along the same horizontal streamline. There is no pump, turbine or loss between the sections. The narrow section has higher speed. How does its static pressure compare?

Same-streamline givensSame heightSteady ideal flowNarrow section fasterNo added work or loss
Given conditions only; arrows and distances are schematic.

Commit to both a prediction and a reason before revealing the explanation.

Step 1: Pick your answer.

STOP! Before revealing — why did you pick that?

3

▶ PLAY — Live Parcel with Pressure, Speed and Height Accounting

DOK 2 — Investigate

Predict, measure and compare

Compare two outlet areas at fixed flow and elevation change. Then change only outlet elevation from one of that pair. Complete three runs. Follow the gold parcel while its local pressure, speed and elevation change; verify the same Bernoulli sum.

A filled ideal pipe has A1 = 0.0040 m² and selected A2. Uniform density is 1000 kg/m³, g = 9.8 m/s² and inlet absolute static pressure is 120 kPa. Ambient reference is 100 kPa. Q is externally regulated, with no source or loss between inlet and outlet. Horizontal inlet and outlet lengths are 0.80 m each. The transition has horizontal span 0.40 m and elevation change Δy, so its actual length is √(0.40² + Δy²). Area changes linearly with distance along that segment. Local speed is Q/A, and parcel position follows the cumulative volume coordinate. Pressure follows the same energy constant. All allowed absolute pressures remain positive. Diagram length and width are schematic; one physical parcel transit plays over 8 real seconds.

Use the labelled readouts.

Status: Ready

Playback: 8 real seconds per run; read elapsed physical model time. Pause or Step for measurements.

Measurements

Physical elapsed time:
Parcel distance along pipe:
Parcel local speed:
Parcel elevation above inlet datum:
Parcel absolute static pressure:
Parcel gauge static pressure:
Parcel kinetic term per volume:
Parcel gravity term per volume:
Parcel Bernoulli sum:
Outlet absolute static pressure:
Inlet Bernoulli sum:

Load givens — then predict and run

Loading a setup earns no trial credit.

4

♢ DISCOVER — Energy Terms and Valid Comparisons

DOK 1 — Recall

Flip all 4 rule cards. Keep the quantities and model conditions clear.

Rule 1

The Bernoulli sum

Click to flip

The Bernoulli sum

P + ½ρv² + ρgy is constant along a steady incompressible inviscid streamline without added work or losses. Each term has units Pa = J/m³.

Rule 2

Keep height and signs

Click to flip

Keep height and signs

P2 = P1 + ½ρ(v1² − v2²) + ρg(y1 − y2). Higher speed or higher elevation can reduce pressure. A descent can raise pressure while speed also increases.

Rule 3

Continuity supplies geometry

Click to flip

Continuity supplies geometry

For uniform-density steady flow, A1v1 = A2v2. Circular area scales with radius or diameter squared. Do not prescribe inconsistent speeds and areas in a filled pipe.

∫

Rule 4

Static pressure is not impact pressure

Click to flip

Static pressure is not impact pressure

The kinetic term is dynamic pressure, not the fluid’s static pressure. A stagnation measurement stops flow along a suitable streamline and relates the two. Unrelated flows, jet mixing and real wing pressure fields need their own conditions.

Flip all 4 cards to reveal the rules. 0/4 flipped
5

MISCONCEPTION ATTACK — Destroy the Myths

DOK 2 — Analyze

Choose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.

Myth 1: “Every faster fluid everywhere must have lower static pressure than every slower fluid.”

Myth 2: “Doubling speed makes the pressure drop equal to four times the original kinetic term.”

6

✦ THE SECOND “AHA!” — Energy Changes with Conditions

DOK 2 — Apply

Use a consistent datum and calculate changes rather than confusing final terms with differences.

Progress
0/4
Ideal streamline modelSteady; incompressibleNegligible viscosityNo pump between points
Given conditions only; arrows and distances are schematic.

1

Instructor Q1 — The Scope

Where is the simple Bernoulli sum conserved under this mission’s model?

2

Instructor Q2 — Doubling Speed

At equal height, v doubles in a valid ideal comparison. How does the kinetic term ½ρv² change?

3

Instructor Q3 — Fresh Horizontal Pressure

Along a horizontal ideal water streamline, absolute P1 = 140 kPa, v1 = 1 m/s, v2 = 5 m/s and density = 1000 kg/m³. Find absolute P2 in kPa.

Horizontal energy givensP1: 140 kPa absolutev1: 1 m/s; v2: 5 m/sFluid: 1000 kg/m³Same height; ideal
Given conditions only; arrows and distances are schematic.
kPa
4

Instructor Q4 — Equal Speeds, Higher Outlet

Along an ideal liquid streamline speeds are equal and the outlet is 0.50 m higher. Inlet gauge pressure is 70 kPa, density is 1000 kg/m³ and g = 10 m/s². Find outlet gauge pressure in kPa using the same ambient reference.

Elevation givensP1 gauge: 70 kPaEqual speedsOutlet: 0.50 m higherρ: 1000; g: 10 (SI)
Given conditions only; arrows and distances are schematic.
kPa
7

✎ PRACTICE — Independent Streamline Energy Cases

DOK 1–3 — Practice
DOK 1 — Routine

Challenge 1: A Horizontal Ideal Flow

A steady incompressible inviscid liquid follows a horizontal streamline with no added work or losses. Density is 900 kg/m³. At point 1 absolute pressure is 150 kPa and speed is 2.0 m/s; point-2 speed is 6.0 m/s. Find absolute point-2 pressure and the pressure drop, both in kPa.

Horizontal-flow givensP1: 150 kPa absolutev1: 2.0 m/sv2: 6.0 m/sLiquid: 900 kg/m³Same height; ideal
Given conditions only; arrows and distances are schematic.
kPa
kPa
DOK 2 — Application

Challenge 2: A Narrower, Higher Section

A filled ideal pipe carries steady water of density 1000 kg/m³; g = 10 m/s². Inlet area is 0.0060 m², outlet area 0.0030 m², inlet speed 1.20 m/s and inlet gauge pressure 80.0 kPa. The outlet is 1.50 m higher. Both points use ambient pressure 100 kPa as their gauge reference. With no added work or losses, find outlet speed, outlet gauge pressure and outlet absolute pressure.

Raised-outlet givensA1/A2: 0.006/0.003 m²v1: 1.20 m/sP1 gauge: 80.0 kPaOutlet: 1.50 m higherρ: 1000; g: 10 (SI)
Given conditions only; arrows and distances are schematic.
m/s
kPa
kPa
DOK 3 — Audit & Justify

Challenge 3: Audit the Fast-Flow Slogan

A steady incompressible inviscid liquid of density 1000 kg/m³ follows one streamline without added work or losses. Point-1 absolute pressure is 130 kPa and speed is 3.0 m/s. Point 2 is 1.00 m lower with speed 6.0 m/s; g = 10 m/s². A report uses the final kinetic term as the pressure drop rather than its increase, ignores the descent, and extends its result to every unrelated fast fluid. Find the kinetic-term increase, signed change in gravity term from point 1 to 2, and point-2 absolute pressure, all in kPa-equivalent units. Explain all three errors.

Streamline-audit givensP1: 130 kPa absolutev1/v2: 3.0/6.0 m/sPoint 2: 1.00 m lowerFluid: 1000 kg/m³g: 10 m/s²; ideal
Given conditions only; arrows and distances are schematic.
kPa
kPa
kPa
8

☷ CHALLENGE — Sort the Energy Terms and Conditions

DOK 2 — Apply

Sort the Energy Terms and Conditions

Identify whether the statement concerns static pressure, kinetic energy or the remaining conditions.

0 / 6 correct

9

TEACH — The Feynman Technique

DOK 3 — Teach

Your Final Mission: Explain Bernoulli’s energy balance along a valid ideal streamline. Show why greater speed lowers static pressure at equal height, explain how a descent can offset that drop, and distinguish static pressure from the kinetic term without making a universal speed-pressure claim.

Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.

Type Your Explanation (≥ 3 sentences)

Final reward below

Hidden exam secrets inside — Crest's private notebook.