WONDER — The Mystery
Energy With a Stationary Center
A flywheel can have a fixed center while all its material away from the axis moves. Summing the kinetic energies of those moving parts gives rotational energy. When the same rigid body also translates, how do we count all its kinetic energy once without omitting or duplicating motion?
Model: Rigid bodies have constant mass distribution within each run. Use inertia about the fixed rotation axis for pure fixed-axis rotation, or inertia about the CM when separating CM translation from intrinsic rotation. Kinetic energy is a nonnegative scalar and depends on squared speed. A point-mass orbital description can be equivalent to a rotational description; an orbiting extended body may also spin intrinsically.
PREDICT — Commit to Your Answer
DOK 2 — PredictTwo rigid rotors have inertias 0.40 and 0.80 kg·m² about their fixed axes. Both rotate at angular speed 3.0 rad/s. Which has greater rotational kinetic energy?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
Krot = ½Iω². A has 1.8 J and B has 3.6 J. The comparison holds angular speed fixed; it differs from holding torque or angular momentum fixed.
▶ PLAY — Live Rigid Body: Translation and Spin
DOK 2 — InvestigatePredict, measure and compare
Measure two angular velocities at unchanged mass, radius, CM velocity and shape. Then change only mass from one of that pair. Complete three matched runs. Watch translation and rotation occur together; compare the two energy terms and try pure spin or pure translation.
An ideal rigid body has constant horizontal CM velocity and constant angular velocity about a CM axis perpendicular to this top view. No resultant force or torque changes these motions in the run; the chosen initial kinetic energy already exists at t = 0. Shape code 0 is a uniform solid sphere about a diameter, 1 a uniform disk about its central perpendicular axis, and 2 a thin hoop about that axis. Their supplied inertia coefficients are 0.4, 0.5 and 1. There is no imposed rolling/no-slip link: CM speed and spin are independent. A run covers 3 physical seconds over 8 real seconds. Positions use 45 pixels/m; energy bars show fractions of the total and stay constant within a uniform-motion run.
Status: Ready
Playback: 8 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Energy, Axis and Counting Motion
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Rotational kinetic energy
Click to flip
Rotational kinetic energy
Krot = ½Iω² for the specified rigid-body rotation. Energy is scalar and nonnegative. Reversing ω leaves K unchanged; doubling its magnitude quadruples K at unchanged I.
Rule 2
Separate at the center of mass
Click to flip
Separate at the center of mass
Ktotal = ½MvCM² + ½ICMω². This rigid-body decomposition applies whenever the body both translates and spins about its CM. No rolling condition is needed merely to add the two terms.
Rule 3
Do not double-count a fixed axis
Click to flip
Do not double-count a fixed axis
If a body rotates about one fixed axis, ½Iaxisω² already sums the motion of all its particles. Adding its CM translation again double-counts. A CM decomposition using ICM is an equivalent complete calculation.
Rule 4
Qualify orbit and rolling
Click to flip
Qualify orbit and rolling
A nonspinning point mass’s orbital energy can be written using its linear speed or orbital inertia, but not both added. An orbiting extended body can also spin, so include that separate intrinsic term. Only impose vCM = R|ω| when ideal rolling without slip is stated.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “Negative angular velocity gives negative rotational kinetic energy.”
Correct — the claim is false.
False. The squared angular velocity makes energy nonnegative; direction is carried by angular velocity and angular momentum, not kinetic energy.
Myth 2: “For every orbiting body, rotational energy must be excluded from its total kinetic energy.”
Correct — the claim is false.
False. A nonspinning point mass has no intrinsic rotation, but an extended orbiting body may spin about its CM and carry both CM translation and intrinsic rotational energy.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — One Complete Description of the Motion
DOK 2 — ApplyMatch the inertia axis to the selected energy description.
Instructor Q1 — A Fixed-Axis Rotor
A rigid body rotates about a fixed axis away from its CM. Which is a complete energy calculation?
Instructor Q2 — An Orbiting Spinning Body
An extended satellite translates along its orbit and also spins about its CM. How should its kinetic energy be described?
Instructor Q3 — A Clockwise Rotor
A fixed-axis rotor has inertia 0.32 kg·m² and angular velocity −5.0 rad/s. Find its rotational kinetic energy.
Instructor Q4 — A Moving Spinning Body
A rigid body has mass 2.0 kg, CM speed 3.0 m/s, CM-axis inertia 0.50 kg·m² and angular speed 4.0 rad/s. Find total kinetic energy.
4/4 — Instructor Questions Completed
Choose one complete description or a correct CM decomposition, then verify that each particle’s motion is counted once.
✎ PRACTICE — Independent Energy and Axis Audit
DOK 1–3 — PracticeChallenge 1: Direction Does Not Change Energy
A rigid rotor has fixed-axis inertia 0.48 kg·m² and signed angular velocity −5.0 rad/s. Find its rotational kinetic energy.
Step-by-Step Solution
Krot = ½(0.48)(−5.0)² = 6.0 J. Clockwise rotation does not make energy negative.
Challenge 2: Translation With Independent Spin
A rigid body has mass 3.0 kg, CM speed 4.0 m/s, inertia 0.24 kg·m² about its CM rotation axis and angular speed 6.0 rad/s. Find CM translational energy, intrinsic rotational energy and total kinetic energy. No rolling constraint is imposed.
Step-by-Step Solution
Ktrans = ½(3.0)(4.0)² = 24.0 J; Krot,CM = ½(0.24)(6.0)² = 4.32 J. Total = 28.32 J. Both terms apply even without a rolling constraint.
Challenge 3: Audit a Fixed-End Rod Report
A uniform rod has mass 4.0 kg, length 1.5 m and inertia 0.75 kg·m² about a midpoint axis perpendicular to the rod. It rotates at angular velocity −2.0 rad/s about one fixed end, with the end axis parallel to the midpoint axis. A report adds end-axis rotational energy to CM translational energy, calls negative angular velocity a negative energy, and treats midpoint inertia alone as sufficient for fixed-end total energy. Find end-axis inertia, CM speed, CM-axis rotational energy and total rod kinetic energy. Explain all three errors and verify the total with two consistent descriptions.
Step-by-Step Solution
Iend = 0.75 + 4.0(0.75)² = 3.0 kg·m². CM speed = 0.75|−2.0| = 1.5 m/s. CM-axis rotation energy = ½(0.75)(2.0)² = 1.5 J.
Fixed-axis description: Ktotal = ½(3.0)(2.0)² = 6.0 J. CM decomposition: CM translation = ½(4.0)(1.5)² = 4.5 J, plus CM-axis rotation 1.5 J, again total 6.0 J.
The end-axis energy already includes CM translation, so adding it again double-counts. Negative ω does not make energy negative because it is squared. Using ICM alone gives only the intrinsic rotational term and omits the moving CM’s 4.5 J; the axis and decomposition must match.
☷ CHALLENGE — Sort Complete Descriptions and Double Counts
DOK 2 — ApplySort Complete Descriptions and Double Counts
Distinguish an energy term’s physical motion and whether a proposed sum is valid.
0 / 6 correct
Physics Insight
An axis choice can change the bookkeeping while leaving the same physical total energy.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain where a flywheel’s energy resides when its CM is stationary. Then explain how to include both translation and spin for a moving body without adding the same motion twice.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 6.9 — Rotational and Total Kinetic Energy
Count each motion once. Match inertia to its axis.
1. Rotational kinetic energy
Krot = ½Iω²
Every mass element away from the axis moves. For rigid rotation, summing ½mi(riω)² gives ½ω²Σmi ri² = ½Iω². A stationary CM does not imply stationary material or zero kinetic energy.
Energy is a nonnegative scalar, in joules. Signed angular velocity squared gives the same energy for either rotation direction. At fixed inertia, doubling angular speed quadruples energy; doubling inertia at fixed angular speed doubles it. State what is held constant.
2. The center-of-mass decomposition
Ktotal = ½MvCM² + ½ICMω²
Use CM velocity and inertia about the CM rotation axis. This describes a rigid body that translates and spins, regardless of whether it rolls. The spin and translational contributions count different parts of the full particle-motion sum.
For ideal rolling without slipping on stationary ground, vCM = R|ω| can connect the terms. For slipping or independently initialized motion, it cannot be imposed. Adding the terms itself does not require no slip.
3. A fixed-axis calculation is already complete
For pure rotation about an axis fixed in the inertial frame, ½Iaxisω² counts all particle speeds about that axis. It already includes the moving CM if the axis is off center. Adding ½MvCM² again double-counts that motion.
With a parallel axis offset d from CM, Iaxis = ICM + Md² and vCM = d|ω|. Therefore ½Iaxisω² equals ½ICMω² + ½MvCM². These are two complete descriptions of the same total, not two energies to add together.
4. Orbiting bodies can also spin
A nonspinning point mass moving around an external origin has orbital kinetic energy ½mv². If its circular orbital motion is written using Iorbital = mr² and ωorbital = v/r, ½Iorbitalωorbital² gives the same energy. Adding these alternatives duplicates the orbit.
An extended satellite may both orbit and spin about its own CM. Then its CM translational energy and intrinsic spin energy are separate contributions. The previous blanket statement “orbiting: choose one only” was too broad. Always distinguish orbital motion from intrinsic rotation.
5. Shape and axis assumptions
The lab supplies ICM = βMR² with β = 0.4 for a uniform solid sphere about a diameter, 0.5 for a uniform disk about its central perpendicular axis, and 1 for a thin hoop about that axis. These are ideal uniform shape models with specified axes; a differently shaped or nonuniform rotor can have another inertia.
AP Physics 1 supplies extended-body inertia formulas on assessment. Avoid judging a real energy-storage design solely by the largest possible I: angular speed limits, strength and design conditions also matter. The mission’s comparisons hold the stated variables fixed and do not make unsupported engineering-runtime claims.
6. Constant motion means constant kinetic energy
The live body is initialized with constant CM velocity and angular velocity. With no resultant force or torque changing them during the displayed interval, both energy terms remain constant. Moving spokes and a drifting CM show actual motion while the static energy bars correctly show the unchanged fractions of total energy.
The selected initial energy exists at t = 0; it is not created gradually by an unexplained animation. If a real motor spins up a flywheel, torque does work and increases its energy. If a body rolls downhill, gravitational energy can supply its translational and rotational gains under the appropriate loss assumptions.
7. Live experiment and matched comparisons
A run covers 3 physical seconds, displayed over 8 real seconds. Position scale is 45 pixels/m. The shape is a schematic top view of the specified CM axis; marker and spoke rotate according to the integrated angular position. There is no enforced rolling relationship between CM velocity and spin.
Compare two angular speeds, then mass, with other controls fixed. Doubling angular speed quadruples only the rotational term when CM speed is unchanged, so total energy need not quadruple. Reversing ω changes the visible direction but not energy. Run, pause, step and reset remain synchronized; three matched completed runs earn the lab gate.
8. Course scope
AP Physics 1 topic 6.1 covers rotational energy and the rigid-body CM decomposition; 6.5 includes combined rolling energy. Rotational kinetic energy is extension for Cambridge A Level 9702. The mission uses specified axes and original numerical cases without assuming real satellites or rotors behave as uniform shapes.
✓ Crest’s Checklist
- I square angular speed and keep energy nonnegative.
- I match the inertia axis to the energy expression.
- I use ICM when adding CM translation and spin.
- I avoid adding CM translation to a complete fixed-axis total.
- I distinguish orbital motion from intrinsic spin.
- I impose a rolling link only under its no-slip condition.
- I state what is held constant in energy comparisons.
— Crest ☆ “Count each motion once. Match inertia to its axis.”
Mission 6.9 Complete! · All 10 levels cleared · PHYSICS CREST
★ Master of Rotational Kinetic Energy
Choose one complete description or a correct CM decomposition, then verify that each particle’s motion is counted once.