WONDER — The Mystery
Same Mass, a Different Angular Response
Two equal compact masses are fixed to a massless rod, with a frictionless axle at its midpoint perpendicular to the rod. Moving the masses farther from that axle changes their resistance to angular acceleration. Under the same imposed torque and from the same initial rest condition, which arrangement gains angular velocity faster?
Model: Rotational inertia is about a specified axis and uses perpendicular distance to that axis. Point masses neglect each compact part’s own rotational inertia. The live rotor keeps its mass distribution fixed during a run and starts from rest under a constant imposed net torque. Variable-inertia angular-momentum conservation is a separate condition developed later.
PREDICT — Commit to Your Answer
DOK 2 — PredictTwo equal point masses each lie 0.20 m from a midpoint axle on a massless rod. They are moved to 0.60 m from that same axle. By what factor does the total rotational inertia change?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
The radius increases by a factor of 3, so each mr² contribution and their sum increase by 3² = 9. The masses and axis are unchanged.
▶ PLAY — Live Point-Mass Rotor Under the Same Torque
DOK 2 — InvestigatePredict, measure and compare
Complete two runs changing only radius, then a third changing only mass from one of that pair. Compare inertia, angular acceleration and angular velocity at the same physical time under the same torque. Try zero and negative torque without changing the distribution.
Two equal point masses on a massless rod with a fixed midpoint axle perpendicular to the rotation plane. Each has mass m and radius r; distribution remains fixed within a run. A constant external net torque is imposed for 3 physical seconds, played over 8 real seconds. The rotor starts from rest; CCW is positive. Angular acceleration is τ/(2mr²). Radius is drawn at 75 pixels/m, with schematic marker sizes. This compares response to the same torque, rather than conserving the same angular momentum across changed setups.
Status: Ready
Playback: 8 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Angular Velocity: Same Torque, Different Inertia
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Point Masses, Axes and Comparison Conditions
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Sum squared perpendicular distances
Click to flip
Sum squared perpendicular distances
I = Σmi ri² for point masses about the stated axis. ri is the perpendicular distance to that axis, not an arbitrary coordinate or a distance to an unrelated point. Inertia is nonnegative, with unit kg·m².
Rule 2
Separate the comparisons
Click to flip
Separate the comparisons
At fixed net torque and fixed distribution, α = τ/I: greater I gives smaller angular acceleration. At conserved angular momentum L = Iω, reducing I can increase |ω|. Inertia alone does not determine angular speed.
Rule 3
Use parallel axes correctly
Click to flip
Use parallel axes correctly
Inew = ICM + Md², with axes parallel and d their perpendicular separation. The reference must be a center-of-mass axis. ICM is the minimum within a family of parallel axes, not necessarily across different axis orientations.
Rule 4
Shape formulas need their axes
Click to flip
Shape formulas need their axes
Extended-body formulas depend on shape, density and axis. AP Physics 1 supplies these formulas on assessment; qualitative comparisons and point-mass sums matter. For ideal rolling comparisons, the relevant ratio is I/(MR²), with no slipping or dissipation.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “Same mass means the same inertia about every axis.”
Correct — the claim is false.
False. Inertia depends on the mass distribution relative to the chosen axis. The same body can have different values about different axes.
Myth 2: “Any object with smaller absolute inertia must win any rolling race.”
Correct — the claim is false.
False. Ideal rolling acceleration depends on I/(MR²), plus the incline and rolling conditions. Absolute inertia alone is not enough when masses or radii differ.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Squared Distance and Axis Checks
DOK 2 — ApplyPoint-mass calculations use perpendicular distances to the named axis.
Instructor Q1 — Double the Radius
All point-mass radii double, while their masses and the axis stay fixed. How does total inertia change?
Instructor Q2 — Compare Hoop and Disk
A thin hoop and uniform solid disk have equal mass and outer radius and central axes perpendicular to their planes. Which has larger inertia?
Instructor Q3 — Two Point Masses
Two 0.80 kg point masses are each 0.30 m from a midpoint axle on a massless rod. Find total inertia about the axle.
Instructor Q4 — Shift a Parallel Axis
A body has mass 3.0 kg and central-axis inertia 0.20 kg·m². Find its inertia about a parallel axis 0.40 m away.
4/4 — Instructor Questions Completed
“Harder to change rotation” is a statement about angular response, not a universal prediction of angular speed.
✎ PRACTICE — Independent Inertia and Axis Cases
DOK 1–3 — PracticeChallenge 1: A Compact Two-Mass Rotor
Two 0.60 kg point masses are each 0.15 m from a fixed midpoint axis, perpendicular to a massless connecting rod. Find total inertia about that axis.
Step-by-Step Solution
I = 0.60(0.15)² + 0.60(0.15)² = 0.027 kg·m². The rod is massless and contributes zero.
Challenge 2: Three Masses in a Plane
Three point masses lie in the xy plane: 2 kg at (0.30,0.40) m, 1 kg at (−0.60,0) m and 3 kg at (0,−0.20) m. Find total inertia about an axis through the origin perpendicular to the xy plane.
Step-by-Step Solution
For a perpendicular origin axis, r² = x² + y². I = 2(0.30² + 0.40²) + 1(0.60²) + 3(0.20²) = 0.50 + 0.36 + 0.12 = 0.98 kg·m².
Challenge 3: Audit an Axis-Change Report
Two 0.75 kg point masses are fixed at opposite ends of a massless rod, each 0.40 m from its midpoint. A central axis is perpendicular to the rod. A second parallel axis passes through one end. A report calculates central inertia by summing mass times unsquared radius, says the end axis has the same inertia because mass is unchanged, and claims the central axis minimizes inertia over every possible axis orientation. Find central-axis inertia, parallel end-axis inertia and inertia about an axis along the rod. Explain all three errors, including the units and the restriction on the minimum-axis claim.
Step-by-Step Solution
Central I = 2(0.75)(0.40)² = 0.24 kg·m². Unsquared radius produces kg·m, not the correct kg·m².
At the end axis, one point mass is on the axis and the other is 0.80 m away: Iend = 0.75(0.80)² = 0.48 kg·m². Equivalently, ICM + M(0.40)² = 0.24 + 1.50(0.16) = 0.48 kg·m².
For an axis along the massless rod, both ideal point masses have zero perpendicular distance, so I = 0. The central perpendicular axis minimizes inertia only among axes parallel to it. Changing orientation changes the relevant distances and can yield a smaller value. Real extended balls would have their own nonzero inertia; the zero result belongs to the stated point-mass model.
☷ CHALLENGE — Sort Distribution, Axis and Held Conditions
DOK 2 — ApplySort Distribution, Axis and Held Conditions
Use the explicit condition in each comparison.
0 / 6 correct
Physics Insight
Every inertia statement needs an axis; every speed or acceleration statement needs a physical condition.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain why moving equal masses farther from an axle makes their angular acceleration smaller under the same torque. Distinguish this from a skater pulling inward while angular momentum is conserved, and explain why an inertia formula needs its axis.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 6.7 — Rotational Inertia and Its Axis
Mass distribution matters. Always state the axis.
1. Rotational inertia about a named axis
I = Σmi ri², for point masses
Each ri is the perpendicular distance to the chosen axis. Inertia is a nonnegative scalar for that axis, with unit kg·m². Summing mi ri instead gives the wrong length power and unit. Point-mass approximations omit each compact part’s own inertia about its center.
For points in an xy plane and an axis through its origin perpendicular to that plane, ri² = xi² + yi². For another axis, use its own perpendicular distances rather than copying origin coordinates.
2. What is held constant?
With fixed distribution and net torque, angular acceleration is α = τ/I. Doubling each point-mass radius quadruples I and divides α by four under the same torque. Starting from the same angular velocity and comparing after the same duration then gives a smaller torque-induced velocity change.
Inertia alone does not set speed. If angular momentum L = Iω is conserved and I decreases, angular speed can increase. A skater tucks under negligible external torque; this is different from comparing two fixed-distribution rotors driven by the same torque. Changing inertia generally requires the angular-momentum form of the law rather than applying τ = Iα without checking assumptions.
3. Shape formulas and specified axes
For uniform ideal bodies: a thin hoop about its central perpendicular axis has I = MR²; a solid disk about that axis has I = ½MR². A uniform solid sphere about a diameter has I = ⅖MR², and a thin spherical shell about a diameter has I = ⅔MR². A thin rod about a midpoint axis perpendicular to its length has I = ML²/12; about a parallel end axis it has I = ML²/3.
These formulas change when the axis changes. A “rim axis” must specify its direction; a perpendicular axis through a ring rim is not the same as an in-plane tangent axis. Do not apply a shape coefficient to an unspecified geometry.
AP Physics 1 provides extended-body inertia formulas on assessment; students need not memorize them. Its required quantitative sums use five or fewer objects in a two-dimensional arrangement. The point-mass practice here focuses on those calculations and axis reasoning.
4. The parallel-axis theorem
Inew = ICM + Md²
The two axes must be parallel, and the reference inertia must be about an axis through the center of mass. d is their perpendicular separation. M is the same total body mass. Starting from an arbitrary off-center reference and adding another Md² without locating the CM is not valid.
The CM-axis value is the minimum within that family of parallel axes. This does not make it the smallest over every axis orientation. Two ideal point masses on a massless rod can have nonzero inertia about a central perpendicular axis but zero inertia about an axis along the rod.
5. Point mass versus extended mass
If a compact ball is treated as a point mass, mr² is its entire contribution. If its size and spin matter, include its central inertia as well: its contribution about a parallel remote axis is Iball,CM + mr². A real ball on an along-rod axis can have nonzero inertia even when its center lies on that axis.
The zero along-rod answer in the report audit follows from the explicitly ideal point masses and massless rod. It is an axis-comparison example, not a suggestion to impose torque and divide by zero in a physical rotor model.
6. Qualified rolling comparisons
For rigid bodies rolling without slip down the same incline from rest with no mechanical-energy dissipation, acceleration depends on the dimensionless ratio β = I/(MR²). Lower β gives greater center acceleration, with the incline and contact conditions held fixed.
When M and R are equal, comparing I is equivalent to comparing β. When they differ, smaller absolute I alone does not identify the winner. The familiar sphere, disk, shell and hoop ordering assumes the stated uniform shapes, axes, same release conditions, enough static friction for no slip and no dissipative losses.
7. The live fixed-distribution rotor
Two equal masses at radius r give I = 2mr². During a run the distribution stays fixed. A constant imposed net torque starts the rotor from rest, so ω = (τ/I)t and Δθ = ½(τ/I)t². Radius is drawn at 75 pixels/m; point-marker sizes are schematic. The physical interval is 3 seconds, played over 8 real seconds.
Spokes and both masses rotate according to the same integrated angle, and the angular-velocity graph develops with the physical clock. Zero torque from rest leaves the rotor stationary; negative torque accelerates it clockwise. Run, pause, step and reset stay synchronized. Three matched completed setups isolate radius and mass while torque is held fixed.
8. Course boundary
AP Physics 1 5.4 covers mass distribution, point-mass inertia sums and the parallel-axis theorem. The full rotational-inertia treatment is extension for Cambridge A Level 9702; it is not a numbered prescribed objective there. Angular response and conservation are developed in Missions 6.8, 6.10 and 6.11.
✓ Crest’s Checklist
- I specify the axis and perpendicular distances.
- I square the radius and use kg·m².
- I include all point masses once.
- I name what is fixed in a motion comparison.
- I use the parallel-axis theorem from a CM-axis reference.
- I restrict the minimum claim to parallel axes.
- I qualify ideal rolling-race comparisons.
— Crest ☆ “Mass distribution matters. Always state the axis.”
Mission 6.7 Complete! · All 10 levels cleared · PHYSICS CREST
★ Master of Rotational Inertia
“Harder to change rotation” is a statement about angular response, not a universal prediction of angular speed.