Skip to lesson
PC

PHYSICS CREST

Global Physics Academy

Mission 6.2 · Constant Angular Acceleration Equations State the assumption. Preserve the signs. Check for reversal.
Journey Tracker
Progress
0/10
1

WONDER — The Mystery

Does Braking Keep a Wheel Stopped?

A fixed-axis rotor starts with positive angular velocity and experiences a constant negative angular acceleration. It slows to zero. If that same acceleration continues, does the rotor stay at rest or reverse? A graph and a moving marker can expose a mistake that a final speed alone may hide.

Rotor modelFixed axleConstant angular aCCW positive
Given conditions only; arrows and distances are schematic.

Model: Rigid fixed-axis motion with constant angular acceleration over each stated interval. CCW is positive. Angular displacement is signed and unwrapped. Signed arc displacement of a point differs from its circular path distance if rotation reverses. A fixed axle does not translate merely because its rim rotates.

2

PREDICT — Commit to Your Answer

DOK 2 — Predict

A rotor initially turns clockwise at −4.8 rad/s. It reaches rest after 3.0 s under constant angular acceleration. CCW is positive. What is the angular acceleration?

Prediction givensInitial ω: −4.8 rad/sFinal ω: 0 rad/sInterval: 3.0 sConstant angular a
Given conditions only; arrows and distances are schematic.

Commit to both a prediction and a reason before revealing the explanation.

Step 1: Pick your answer.

STOP! Before revealing — why did you pick that?

3

▶ PLAY — Live Rotor: Stop, Reverse and Measure

DOK 2 — Investigate

Predict, measure and compare

Measure two initial angular velocities at the same acceleration, run duration and radius. Then change only acceleration from one of that pair. Complete three matched runs. Compare final velocity, signed displacement and total angle traveled, especially when a run crosses zero velocity.

A fixed axle and rigid rotor. Constant α is imposed for the selected physical duration, displayed over 8 real seconds. CCW is positive. A persistent rim marker follows the integrated angle. The rotor is drawn at 48 pixels per meter. Signed arc displacement is rΔθ; path distance accumulates absolute motion, including both directions after reversal. Shaded graph areas above and below zero contribute opposite signs.

Use the labelled readouts.

Status: Ready

Playback: 8 real seconds per run; read elapsed physical model time. Pause or Step for measurements.

Angular Velocity: Signed Area Develops Live

Use the labelled readouts.

Measurements

Physical elapsed time:
Signed instantaneous angular velocity:
Net angular displacement:
Total angle traveled:
Average angular velocity since start:
Signed rim arc displacement:
Rim path distance:
Rim linear speed:
Zero-velocity instant within run:

Load givens — then predict and run

Loading a setup earns no trial credit.

4

♢ DISCOVER — The Four Equations and Their Conditions

DOK 1 — Recall

Flip all 4 rule cards. Keep the quantities and model conditions clear.

Rule 1

Final angular velocity

Click to flip

Final angular velocity

ωf = ω0 + αt. Requires constant α over the interval. Its sign describes direction; speed is |ωf|. Slowing occurs when nonzero ω and α have opposite signs, which may change after reversal.

Rule 2

Angular displacement

Click to flip

Angular displacement

Δθ = ω0t + ½αt². Requires constant α. The time is squared in the second term. Δθ is signed displacement, not total angle traveled when direction reverses.

Rule 3

Eliminate time

Click to flip

Eliminate time

ωf² = ω0² + 2αΔθ. Requires constant α. Squaring loses the sign of ωf: recover the physically correct direction from the time evolution or other evidence. It does not justify always taking the positive root.

∫

Rule 4

Use the average for constant α

Click to flip

Use the average for constant α

Δθ = ½(ω0 + ωf)t. The endpoint average equals the interval average because ω(t) is linear for constant α. For varying α, the endpoint average is not generally the true average.

Flip all 4 cards to reveal the rules. 0/4 flipped
5

MISCONCEPTION ATTACK — Destroy the Myths

DOK 2 — Analyze

Choose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.

Myth 1: “Negative angular acceleration always means a rotating body is slowing down.”

Myth 2: “The total rim path distance is always r times the magnitude of the net angular displacement.”

6

✦ THE SECOND “AHA!” — Choose an Equation and Interpret It

DOK 2 — Apply

Each quantitative question specifies constant angular acceleration.

Progress
0/4
Rotor modelFixed axleConstant angular aCCW positive
Given conditions only; arrows and distances are schematic.

1

Instructor Q1 — Which Assumption?

When may the initial and final angular velocities be averaged to obtain the interval average angular velocity?

2

Instructor Q2 — The Square-Root Trap

A time-free equation gives ωf² = 9 (rad/s)². What can be concluded about ωf from that equation alone?

3

Instructor Q3 — From Rest

A rotor starts from rest with constant angular acceleration +1.5 rad/s² for 4.0 s. Find its angular displacement.

Spin-up givensInitial ω: 0Angular a: +1.5 rad/s²Interval: 4.0 sConstant angular a
Given conditions only; arrows and distances are schematic.
rad
4

Instructor Q4 — A Slowdown Interval

A rotor decreases from +7.0 to +1.0 rad/s in 3.0 s with constant angular acceleration. Find the angular displacement.

Slowdown givensInitial ω: +7 rad/sFinal ω: +1 rad/sInterval: 3.0 sConstant angular a
Given conditions only; arrows and distances are schematic.
rad
7

✎ PRACTICE — Independent Constant-Acceleration Cases

DOK 1–3 — Practice
DOK 1 — Routine

Challenge 1: Clockwise Braking

A rotor initially has angular velocity −6.0 rad/s and reaches zero angular velocity in 3.0 s under constant angular acceleration. CCW is positive. Find the signed angular acceleration.

Brake givensInitial ω: −6 rad/sFinal ω: 0 rad/sInterval: 3.0 sConstant angular a
Given conditions only; arrows and distances are schematic.
rad/s²
DOK 2 — Application

Challenge 2: A Fixed-Axle Wheel Speeds Up

A rigid fixed-axis wheel has a marked point at radius 0.25 m. Its initial angular velocity is +0.50 rad/s and its constant angular acceleration is +1.2 rad/s² for 4.0 s. CCW is positive. Find the final angular velocity, angular displacement and final linear speed of the mark.

Wheel givensMarked radius: 0.25 mInitial ω: +0.50 rad/sAngular a: +1.2 rad/s²Interval: 4.0 sFixed axle; constant a
Given conditions only; arrows and distances are schematic.
rad/s
rad
m/s
DOK 3 — Audit & Justify

Challenge 3: Audit a Reversal Report

A fixed-axis rotor begins at +4.0 rad/s and has constant angular acceleration −2.0 rad/s² for a full 5.0 s. A rim mark is at radius 0.30 m. CCW is positive. A report says the rotor stops after 2 s and stays stopped; uses ωf² to choose +6 rad/s; and says the rim path distance is r|Δθ|. Find the final signed angular velocity, net angular displacement, total angle traveled and rim path distance. Explain all three report errors and identify what change to the acceleration would be needed to keep it stopped after 2 s.

Full-interval givensInitial ω: +4.0 rad/sAngular a: −2 rad/s²Full interval: 5.0 sMarked radius: 0.30 mCCW positive; constant a
Given conditions only; arrows and distances are schematic.
rad/s
rad
rad
m
8

☷ CHALLENGE — Sort Equations, Signs and Path Interpretations

DOK 2 — Apply

Sort Equations, Signs and Path Interpretations

Classify statements by their role in constant-angular-acceleration problems.

0 / 6 correct

9

TEACH — The Feynman Technique

DOK 3 — Teach

Your Final Mission: Explain why a rotor with positive initial angular velocity and constant negative angular acceleration can stop and then reverse. Distinguish final angular velocity, net angular displacement and total angle traveled, and state when the four equations are valid.

Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.

Type Your Explanation (≥ 3 sentences)

Final reward below

Hidden exam secrets inside — Crest's private notebook.