WONDER — The Mystery
Same Angle, Different Paths
Two marks lie at different radii on one rigid wheel rotating about a fixed axle. In one complete turn they share the same angular displacement, but the outer mark follows a longer circular path. A mark exactly on the axis remains at a fixed position. How can the wheel share one angular velocity while its marks have different linear speeds?
Model: Rigid rotation about one fixed axis, viewed from the same side. Counterclockwise (CCW) is positive and clockwise (CW) negative. Distances from the axis are fixed. Angular displacement is unwrapped and can exceed one turn. Tangential acceleration is only one component of a moving rim point’s total acceleration.
PREDICT — Commit to Your Answer
DOK 2 — PredictA rigid wheel rotates counterclockwise at 3.0 rad/s. A mark lies 0.40 m from its fixed axle. What is the mark’s linear speed?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
The instantaneous linear speed is r|ω| = 0.40 × 3.0 = 1.2 m/s. Points share angular velocity, while their linear speeds scale with radius.
▶ PLAY — Live Rigid Wheel: Two Marked Radii
DOK 2 — InvestigatePredict, measure and compare
Measure two radii with the same initial angular velocity and angular acceleration. Then change only initial angular velocity from one of that pair. Complete three matched runs. Watch the inner and outer markers turn together and compare their speeds. Try braking through reversal.
A rigid wheel rotates about a fixed axle for 4 physical seconds, played over 8 real seconds. CCW is positive. Outer radius is r, inner radius r/2. Angular acceleration is constant within a run. The spokes and both persistent markers follow the integrated angle, including stopping and reversal. Positions use a fixed scale of 48 pixels per meter. Cyan velocity arrows have exact directions and schematic lengths. Period and frequency are reported only for nonzero uniform rotation.
Status: Ready
Playback: 8 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Signed Angular Velocity vs Time
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Define the Quantities Precisely
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Radians connect arc and angle
Click to flip
Radians connect arc and angle
A radian is the angle subtended when arc length equals radius. 1 revolution = 2π radians = 360°. For a fixed radius and a consistent signed direction, Δs = rΔθ. Total path length uses the accumulated absolute angle when direction reverses.
Rule 2
Average is not always instantaneous
Click to flip
Average is not always instantaneous
Average angular velocity is Δθ/Δt over an interval; average angular acceleration is Δω/Δt. Instantaneous quantities describe the rate at one moment. A rigid body shares angular velocity and angular acceleration about the same axis.
Rule 3
Radius scales linear quantities
Click to flip
Radius scales linear quantities
A point at radius r has linear speed r|ω| and signed tangential acceleration rα. Tangential acceleration does not include the inward component rω². A point on the fixed axis has zero linear speed.
Rule 4
Period uses angular speed
Click to flip
Period uses angular speed
For nonzero uniform rotation, T = 2π/|ω| and f = |ω|/(2π). T and f are nonnegative; signed ω indicates direction. For changing ω, this quotient is not generally the actual duration of the next complete turn.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “The outer point on a rigid rotating disk has a greater angular velocity than an inner point.”
Correct — the claim is false.
False. Both share angular velocity and angular acceleration; their linear speeds differ because their radii differ.
Myth 2: “A rim point has zero total acceleration whenever angular velocity is constant.”
Correct — the claim is false.
False. Tangential acceleration is zero, but nonzero-speed circular motion still has inward acceleration.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Angles, Rates and Radii
DOK 2 — ApplyKeep angular rates, signed quantities and linear speeds distinct.
Instructor Q1 — The Axis Point
A rigid disk rotates about a fixed axle. What is the linear speed of a point exactly on that axle?
Instructor Q2 — A Clockwise Turn
CCW is positive. A mark completes a clockwise turn in 8 s at uniform angular velocity. Which quantity is negative?
Instructor Q3 — Convert an Angle
A wheel rotates counterclockwise through 135°. Express this angular displacement in radians.
Instructor Q4 — A Uniform Period
A wheel rotates uniformly with angular speed 2.5 rad/s. Find the period.
4/4 — Instructor Questions Completed
State the axis, direction convention, time interval and point radius before connecting angular and linear motion.
✎ PRACTICE — Independent Angular and Linear Cases
DOK 1–3 — PracticeChallenge 1: A Signed Average
Viewed from above, a rotor completes 3 clockwise revolutions in 7.5 s. Counterclockwise is positive. Find its average angular velocity over this interval.
Step-by-Step Solution
Δθ = −3(2π) = −6π rad. Average ω = −6π/7.5 = −0.8π ≈ −2.513274 rad/s. This interval average alone does not establish a constant instantaneous angular velocity.
Challenge 2: The Rotating Drum
A rigid drum has diameter 0.90 m. It completes 4 counterclockwise revolutions uniformly in 3.0 s. Find its angular velocity, the distance traveled along the circular path by a rim mark and the mark’s linear speed. CCW is positive.
Step-by-Step Solution
r = 0.90/2 = 0.45 m. Δθ = 8π rad; ω = 8π/3 ≈ 8.37758 rad/s. Path distance = 0.45(8π) ≈ 11.30973 m; linear speed = 0.45(8π/3) ≈ 3.76991 m/s.
The mark returns to its starting location after four turns, so its ground-frame displacement vector is zero despite its nonzero path distance.
Challenge 3: Audit a Fan Report
A rigid fan rotates uniformly clockwise at 150 revolutions per minute. Its diameter is 0.72 m. CCW is positive. A report states “ω = +150 rad/s; the rim radius is 0.72 m; and a rim mark has zero total acceleration because ω is constant.” Find the signed angular velocity, rim linear speed, tangential acceleration magnitude and inward acceleration magnitude. Explain each of the three report errors, including why uniform rotation still accelerates a rim mark.
Step-by-Step Solution
ω = −150(2π)/60 = −5π ≈ −15.70796 rad/s. Convert revolutions to radians and minutes to seconds; clockwise is negative with CCW positive.
Radius = 0.72/2 = 0.36 m, not the diameter. Rim speed = 0.36(5π) ≈ 5.65487 m/s.
Constant ω gives α = 0 and tangential acceleration zero. The mark’s velocity direction still changes, so its inward acceleration = 0.36(5π)² ≈ 88.82644 m/s². Total acceleration is inward, not zero.
☷ CHALLENGE — Sort Angular and Linear Descriptions
DOK 2 — ApplySort Angular and Linear Descriptions
Classify each quantity. The specified motion is about one fixed axis.
0 / 6 correct
Physics Insight
A shared angular description can produce different linear quantities at different radii.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain why two points on one rigid rotating wheel have the same angular velocity but different linear speeds. Include the axis point and explain why a rim mark can accelerate even at constant angular velocity.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 6.1 — Rotational Kinematics
Shared rotation. Radius-dependent linear motion.
1. Radians and signed angular displacement
1 revolution = 2π rad = 360°; θrad = θdegrees × π/180
One radian subtends an arc whose length equals the circle’s radius. Radians are dimensionless in SI, but the rad label identifies angular quantities. The numerical relationships s = rθ and v = rω require angles expressed in radians; degrees require conversion first. It is not accurate to explain the link by treating radius as meters per radian.
Angular position depends on a reference direction. Angular displacement Δθ = θfinal − θinitial is unwrapped: a point can rotate through many complete turns even when its final visible orientation repeats. With a stated sign convention, clockwise and counterclockwise displacements have opposite signs. The convention is a choice, used consistently.
2. Averages and instantaneous rates
ωaverage = Δθ/Δt; αaverage = Δω/Δt
These are interval averages, not universal definitions of the instantaneous values. Instantaneous angular velocity is the rate of angular position at one moment; instantaneous angular acceleration is the rate of angular velocity. Uniform angular velocity makes the interval average equal to its instantaneous value. Constant angular acceleration makes its interval average equal to its instantaneous value.
The lab fixes constant α in each run and integrates ω = ω0 + αt and Δθ = ω0t + ½αt². Mission 6.2 develops these constant-acceleration equations. If the rotor changes direction, net angular displacement differs from total angle traveled.
3. One rigid body, many point velocities
All points of one rigid system share angular velocity and angular acceleration about the same axis. They need not share linear velocities: those point in different tangent directions and their magnitudes depend on distance from the axis.
Linear speed = r|ω|; signed tangential component a_t = rα
For fixed-radius motion the instantaneous relationships do not require constant α. A point exactly on a fixed axis remains at rest. A mark at twice the radius has twice the linear speed at the same angular velocity. The axis point does not “barely move”: it has zero linear speed in this fixed-axis model.
4. Arc distance and displacement
For a one-way rotation, circular path distance is r|Δθ|. For a reversal, sum the distances from each direction separately, or integrate r|ω| over the interval. Signed arc displacement rΔθ is not the straight-line displacement vector between the point’s initial and final positions.
After an integer number of turns, a fixed-axis point returns to its starting position. Its straight-line displacement is zero, while its distance traveled and unwrapped angle are nonzero.
5. Acceleration at uniform rotation
Tangential magnitude = r|α|; inward magnitude = rω²
At constant nonzero angular velocity, α and tangential acceleration are zero, but inward acceleration remains. Velocity is a vector: changing direction changes velocity even when speed stays constant. A fixed-axis point’s tangential and inward acceleration components are perpendicular; its total magnitude is their vector sum, √[(rα)² + (rω²)²].
Do not label a = rα as the total acceleration in general. It describes only the tangential component. At an instant with ω = 0, the inward component is zero, while a nonzero α can produce tangential acceleration.
6. Period, frequency and conversion
For nonzero uniform rotation: T = 2π/|ω|; f = 1/T; |ω| = 2πf
Period is the positive time for one repeated cycle. Frequency is nonnegative cycles per second, in hertz. Signed angular velocity tells the direction. At rest there is no finite rotation period; the lab reports “no turn” and frequency zero.
When angular velocity changes, 2π/|ωinstant| does not generally predict the time required for the next turn. The lab labels period and frequency only for uniform rotation; it does not show a negative period when the wheel turns clockwise.
To convert a rate in revolutions per minute to angular speed, multiply by 2π/60. Then assign the sign from the direction convention. For example, 90 rpm gives speed 3π rad/s; CCW-positive clockwise rotation has angular velocity −3π rad/s.
7. The live two-marker experiment
Run, pause, step or reset the wheel. The outer marker is at r; the inner marker is at r/2. Both move according to the same integrated angle and remain on their circles. Their instantaneous speed ratio is two whenever ω is nonzero. At a stopping instant both speeds vanish; the ratio is then undefined.
A run lasts 4 physical seconds, displayed over 8 real seconds. The canvas uses 48 pixels per meter, so a larger wheel really has a larger drawn radius. The cyan arrows show instantaneous velocity directions; lengths are schematic. The angular-velocity graph develops as physical time advances. Braking may cross zero and reverse the motion rather than clamp it at rest.
Complete two runs varying only radius, then a third varying only initial angular velocity. Changing givens resets the current run. Loading presets earns no credit until the full physical interval is measured. Saved progress resumes paused. Reduced-motion preference uses a completed snapshot on Run; Step still permits deliberate inspection.
8. Course scope
AP Physics 1 topics 5.1 and 5.2 cover angular quantities and fixed-axis linear–angular connections. Cambridge A Level 9702 topic 12.1 covers radians, angular speed and v = rω; 12.2 covers uniform inward acceleration. Angular acceleration and its integrated treatment here are extension for Cambridge, rather than an additional syllabus requirement.
✓ Crest’s Checklist
- I distinguish interval averages from instantaneous rates.
- I convert angle and rate units before using link equations.
- I use one consistent rotation sign convention.
- I distinguish diameter from point radius.
- I separate path distance from straight-line displacement.
- I keep tangential and inward acceleration distinct.
- I use positive period and frequency for uniform rotation.
— Crest ☆ “Shared rotation. Radius-dependent linear motion.”
Mission 6.1 Complete! · All 10 levels cleared · PHYSICS CREST
★ Master of Rotational Kinematics
State the axis, direction convention, time interval and point radius before connecting angular and linear motion.