WONDER — The Mystery
Straight Motion Can Have Angular Momentum
A point mass moves uniformly along a straight path that misses a fixed origin. Its distance from that origin changes, but its perpendicular path offset does not. With zero net force in the plane, there is zero net torque about the fixed origin. How can its angular momentum stay constant even though it is not intrinsically spinning?
Model: One plane and a fixed inertial reference axis perpendicular to it. CCW is positive for signed axial quantities. A rigid rotor uses inertia about its rotation axis; a point mass uses momentum and perpendicular position geometry. The straight-path model is force-free in the plane, not a freely falling baseball under gravity. Formal three-dimensional direction-vector calculations are excluded.
PREDICT — Commit to Your Answer
DOK 2 — PredictTwo equal point masses each have mass 0.30 kg and velocity +2.0 m/s in the y direction. A is at (3,0) m; B is at (0,3) m. About the perpendicular origin axis, which statement is correct?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
A has a 3 m perpendicular momentum arm and positive turning sense, giving +3(0.30)(2) = +1.8 kg·m²/s. B moves radially, so its perpendicular arm is zero.
▶ PLAY — Live Rotor: One-Second Torque Pulse, Then Coast
DOK 2 — InvestigatePredict, measure and compare
Measure two inertias with the same initial angular velocity and torque pulse. Then change only pulse torque from one of that pair. Complete three matched runs. Watch the rotor change angular velocity during the first second and coast during the second; compare impulse, angular momentum and angular velocity.
A rigid fixed-axis rotor has fixed inertia I and initial angular velocity ω0. A constant signed net external torque acts for the first 1 physical second, then is switched to zero for the next 1 second. The run lasts 2 physical seconds over 8 real seconds. CCW is positive. A persistent marker and spokes follow the piecewise integrated angle, including reversal when applicable. The circle is a schematic rotor, not a supplied inertia shape formula. Momentum changes only while the torque pulse acts; coasting can have nonzero momentum.
Status: Ready
Playback: 8 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Angular Momentum vs Physical Time
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Reference, Distribution and Impulse
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Rigid rotation about the axis
Click to flip
Rigid rotation about the axis
For the specified fixed-axis rotor, signed axial angular momentum is L = Iω. The inertia and rotation refer to the same axis. Momentum changes sign on reversal; rotational kinetic energy remains nonnegative.
Rule 2
Point-mass geometry
Click to flip
Point-mass geometry
A point mass has angular-momentum magnitude rp|sin θ| = p times the perpendicular momentum arm. This applies to any instantaneous path geometry, not only straight motion. Radial motion has zero moment about that reference.
Rule 3
Torque changes momentum
Click to flip
Torque changes momentum
Net external torque is the rate of change of angular momentum. Angular impulse is signed area under the torque–time graph. Constant torque gives ΔL = τΔt; a varying torque requires the actual area or average torque over the interval.
Rule 4
Initial value and fixed inertia matter
Click to flip
Initial value and fixed inertia matter
Final L = initial L + angular impulse. For fixed I, ΔL = IΔω. Zero torque at an instant does not imply zero L. Zero net external torque throughout an interval preserves L; it does not force the rotor to stop.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “An object moving in a straight line must have zero angular momentum about every origin.”
Correct — the claim is false.
False. A nonzero perpendicular path offset gives angular momentum about an origin. A reference point on the path instead gives zero in the point-mass model.
Myth 2: “Zero current net torque proves current angular momentum is zero.”
Correct — the claim is false.
False. Zero torque gives zero rate of change at that instant. A freely coasting rotor can have nonzero constant angular momentum.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Axis Geometry and Angular Impulse
DOK 2 — ApplyUse one stated inertial reference and the signed initial value.
Instructor Q1 — The Appropriate Rotor Quantity
A rigid rotor with fixed inertia spins about one fixed axis. Which expression gives its signed axial angular momentum?
Instructor Q2 — Changing Torque
A torque varies during an interval. How is its angular impulse found?
Instructor Q3 — Clockwise Momentum
A rotor has fixed inertia 0.60 kg·m² and angular velocity −3.0 rad/s. Find signed angular momentum about its axle.
Instructor Q4 — A Constant Pulse
A net torque +0.75 N·m acts for 2.0 s. Find the signed angular impulse.
4/4 — Instructor Questions Completed
Torque is a rate of change, angular impulse is a change, and angular momentum is a signed state about a specified reference.
✎ PRACTICE — Independent Reference and Impulse Cases
DOK 1–3 — PracticeChallenge 1: Signed Rotor Momentum
A rigid fixed-axis rotor has inertia 0.45 kg·m² and angular velocity −4.0 rad/s. CCW is positive. Find its signed angular momentum about the axle.
Step-by-Step Solution
L = Iω = 0.45(−4.0) = −1.80 kg·m²/s. The negative sign corresponds to clockwise rotation.
Challenge 2: A Puck and Two References
A 0.80 kg point-mass puck moves in the +x direction at 4.0 m/s. At the instant considered it is at (2.0,0.30) m. Find its linear momentum magnitude, signed angular momentum about the perpendicular axis at O = (0,0), and signed angular momentum about the parallel axis at P = (0,0.30) m. CCW is positive.
Step-by-Step Solution
p = mv = 0.80(4.0) = 3.2 kg·m/s. About O the path is 0.30 m above the reference, giving clockwise signed L = −0.30(3.2) = −0.96 kg·m²/s. P lies on the path, so its perpendicular momentum arm is zero and LaboutP = 0.
Challenge 3: Audit a Triangular Torque Pulse
A rotor has fixed inertia 0.40 kg·m² and initial angular velocity −2.0 rad/s. CCW is positive. Net torque rises linearly from zero at t = 0 to +0.80 N·m at t = 2.0 s, then decreases linearly to zero at t = 4.0 s. A report uses peak torque times the full duration for impulse, keeps final momentum clockwise because the rotor started clockwise, and says zero final torque means zero final momentum. Find signed angular impulse, final signed angular momentum, final angular velocity and final kinetic energy. Explain all three errors.
Step-by-Step Solution
Impulse is triangle area = ½(4.0)(0.80) = +1.60 N·m·s. Initial L = 0.40(−2.0) = −0.80 kg·m²/s, so final L = −0.80 + 1.60 = +0.80 kg·m²/s.
Final ω = 0.80/0.40 = +2.0 rad/s, so the rotor has reversed to CCW. Final K = ½(0.40)(2.0)² = 0.80 J.
Peak torque times duration gives a rectangle, not the actual triangular area. Direction follows initial L plus signed impulse, not initial direction alone. Zero final torque means L is no longer changing then, not that its value is zero. Equal initial and final energies in this particular example do not make energy and angular momentum the same quantity.
☷ CHALLENGE — Sort Momentum, Change and Rate
DOK 2 — ApplySort Momentum, Change and Rate
Distinguish the current state from a change over time and an instantaneous rate.
0 / 6 correct
Physics Insight
A zero slope does not imply a zero value; coasting illustrates the difference.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain why a point mass moving along a straight path can have angular momentum about one origin and zero about another. Then explain how a torque pulse changes a rotor’s angular momentum and why it can coast with nonzero momentum afterward.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 6.10 — Angular Momentum and Angular Impulse
Specify the reference. Add the signed angular impulse.
1. A reference-dependent quantity
Signed axial L = Iω, for the specified fixed-axis rigid rotation
Use inertia and angular velocity about the same axis. In one plane we use CCW-positive scalar components. Angular momentum changes sign on reversal, unlike kinetic energy. Unit kg·m²/s is equivalent to N·m·s for angular impulse.
Formal three-dimensional direction-vector calculations are outside this mission. AP Physics 1 expects one-dimensional vector conventions for magnitudes; its boundary excludes formal direction treatment of angular momentum and angular impulse. The simple planar sign convention supports consistent bookkeeping.
2. Point-mass angular momentum
Magnitude = rp|sin θ| = p b
r is the position distance from the chosen reference to the point, p = mv, and b is the perpendicular distance from the reference to the instantaneous momentum line. The angle is between position and momentum. This point-mass relation is not restricted to straight paths; it is instantaneous geometry.
For planar coordinates a signed component can be found as x py − y px. For a puck at y = b moving right with px = mv and py = 0, L = −bmv about the origin. A reference point on that line gives zero. A radial velocity directly toward or away from a reference has zero angular momentum about it, with angles 180° or 0° respectively.
“Turning your head” is at most a picture for a point mass about a fixed observer; it is not a general physical definition or an account of an extended body’s intrinsic spin.
3. The force-free straight path
For a force-free point mass in the plane, both momentum and the signed path offset remain constant. About a fixed inertial origin, net torque is zero and angular momentum is constant despite changing r and angle. The constant quantity is the perpendicular arm times momentum, not r alone.
A baseball under gravity is not force-free merely because air drag is ignored. Gravity can exert nonzero torque about a ground origin and its trajectory is generally curved. A frictionless puck on a horizontal plane, with gravity and normal force canceling and no horizontal force, supplies a consistent straight-path model.
4. Net torque and angular impulse
Net external torque is the time rate of change of total angular momentum about the stated inertial reference. Signed angular impulse is the torque–time graph’s area. For constant torque it is τΔt; for a varying torque use the actual area or the time-average torque times duration.
Lfinal = Linitial + angular impulse; fixed I: ΔL = IΔω
A triangular pulse uses half the bounding rectangle’s area. Negative portions subtract from positive portions. The initial momentum must be included even when the rotor reverses. Net torque at the last instant alone does not determine the accumulated change.
5. Momentum is not energy
Angular momentum is linear in signed angular velocity. Kinetic energy is ½Iω² and nonnegative. Equal angular-momentum magnitudes with opposite signs give equal energies for the same inertia. A rotor can slow, reach rest and reverse while a torque continues in one direction.
Zero current torque means the momentum slope is zero at that instant; it can be a nonzero value. Conservation over an interval follows when net external torque is zero throughout it. A zero total external angular impulse can also preserve endpoint momenta even if torque acted in between.
6. The live pulse and coast
The fixed-inertia rotor receives the selected constant torque for 1 physical second, then zero torque for 1 second. Angular impulse grows only during the pulse, and L = Iω0 + τ times elapsed pulse duration. Angular velocity then remains at its acquired value during coasting.
The marker’s angle is integrated piecewise so position and velocity are continuous at the switch. The momentum graph changes slope at 1 s. Opposing pulses can reverse the rotor; free coasting can remain clockwise, and an initially resting zero-torque rotor stays at rest.
The run is 2 physical seconds over 8 real seconds. Compare two inertias, then pulse torque, with other controls fixed. The same pulse impulse gives the same ΔL but different Δω at different inertias. Loading presets earns no measured-trial credit; three matched completed runs unlock the next stage.
7. Course scope
AP Physics 1 topic 6.3 directly covers axial angular momentum, angular impulse, torque–time area and momentum–time slope. The broader point-reference geometry here supports that physics; formal vector-direction calculations are excluded. Angular momentum is extension for Cambridge A Level 9702.
✓ Crest’s Checklist
- I state the axis or inertial reference point.
- I use the perpendicular momentum arm for a point mass.
- I preserve the signed initial angular momentum.
- I find varying-torque impulse from signed graph area.
- I distinguish momentum value from its torque-controlled rate.
- I use IΔω only when inertia is fixed.
- I separate signed momentum from scalar energy.
— Crest ☆ “Specify the reference. Add the signed angular impulse.”
Mission 6.10 Complete! · All 10 levels cleared · PHYSICS CREST
★ Master of Angular Momentum
Torque is a rate of change, angular impulse is a change, and angular momentum is a signed state about a specified reference.