WONDER — The Mystery
Steady Speed, Changing Velocity
Two markers on the same rigid rotating platform complete each revolution together. One is twice as far from the axis as the other. Do their angular speeds, linear speeds and inward accelerations all match?
Model: Uniform rotation about a fixed axis in an inertial frame. Every point has the same angular speed and period; linear speed depends on distance from the axis. Radial acceleration changes direction of velocity. Motion with changing speed needs a tangential component too.
PREDICT — Commit to Your Answer
DOK 2 — PredictA particle moves clockwise around a circle at constant speed. At the top it moves right. Which way does its instantaneous acceleration point?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
The inward radius at the top points downward. Constant speed leaves a nonzero acceleration because velocity direction changes.
▶ PLAY — Live Two-Marker Rotation
DOK 2 — InvestigatePredict, measure and compare
Measure two periods at the same outer radius and rotation direction. Then change only outer radius from one of that pair. Compare three matched setups. Pause to inspect both tangent velocities and inward accelerations; reverse rotation and compare magnitudes.
Two particles at radii r and r/2 are carried by the same ideal rigid platform. Both complete one revolution in T seconds. The controls set uniform rotation; suitable constraints supply the needed radial acceleration. The angular position follows ±2πt/T, rather than an arbitrary animation rate. The sketch is rescaled; arrow directions are exact and lengths schematic.
Status: Ready
Playback: 1 simulation seconds per real second. Pause or Step for measurements.
Outer Position Components vs Time
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Radian, Period and Velocity Vectors
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Define radians and angular speed
Click to flip
Define radians and angular speed
An angle in radians is arc length divided by radius: θ = s/r. One revolution is 2π rad. In uniform motion, angular speed ω = 2π/T and linear speed v = rω.
Rule 2
Connect period and frequency
Click to flip
Connect period and frequency
T is time per revolution in s; f is revolutions per second in Hz. f = 1/T. Two markers rigidly rotating together share T, f and ω, even though their speeds differ.
Rule 3
Resolve uniform motion vectors
Click to flip
Resolve uniform motion vectors
Velocity is tangent. Acceleration is inward, with magnitude v²/r = ω²r. At constant speed the vectors are perpendicular; their directions change continuously.
Rule 4
Keep finite intervals separate
Click to flip
Keep finite intervals separate
Average acceleration is (vfinal − vinitial)/Δt. For a symmetric arc in uniform motion, it points inward at the arc’s midpoint. Instantaneous acceleration is the limit as Δt tends to zero, inward at the current position.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “Two points on the same rigid rotating platform have the same linear speed, regardless of radius.”
Correct — the claim is false.
False. They share angular speed, but v = rω. A point twice as far from the axis has twice the linear speed.
Myth 2: “Acceleration in every circular motion must be purely inward, even while speed changes.”
Correct — the claim is false.
False. The radial component is inward; changing speed adds a tangential component. The resultant need not point exactly toward the center.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Finite Vector Changes and Release
DOK 2 — ApplySubtract vectors by components. State whether gravity or other interactions remain after release.
Instructor Q1 — Average Acceleration
During a counterclockwise quarter turn, velocity changes from straight up at the rightmost point to straight left at the top, with equal magnitudes. What is the direction of Δv?
Instructor Q2 — Release Under Gravity
A ball in a vertical circle is released at the top with horizontal rightward velocity. Only gravity acts afterward. What happens?
Instructor Q3 — Find a Period
A uniformly rotating marker completes 5 revolutions each second. Find its period.
Instructor Q4 — Use Radians
An arc has length 6 m on a circle of radius 3 m. Find its angular displacement in radians.
4/4 — Instructor Questions Completed
Same period means same angular speed, not same linear speed. Inward acceleration depends on which motion quantity is held fixed.
✎ PRACTICE — Independent Circular-Motion Cases
DOK 1–3 — PracticeChallenge 1: A Rotating Ride
A marker 3.60 m from a rotating ride’s axis completes one revolution in 5.00 s at constant speed. Find its linear speed.
Step-by-Step Solution
One-revolution distance is 2π × 3.60 m. Speed = 2π × 3.60/5.00 ≈ 4.524 m/s.
Challenge 2: A Wheel Marker
A marker is 0.45 m from the axis of a wheel rotating uniformly at 2.50 Hz. Find the period, angular speed and marker’s inward acceleration magnitude.
Step-by-Step Solution
T = 1/2.50 = 0.40 s. Angular speed = 2π × 2.50 = 5π ≈ 15.708 rad/s. Linear speed ≈ 7.069 m/s and inward acceleration ≈ 111.033 m/s².
Challenge 3: Audit the Platform Report
Two markers rotate rigidly together with period 3.00 s at radii 0.60 m and 1.80 m. A student says their linear speeds are equal because their periods match, their accelerations are zero because speed is constant, and the outer inward acceleration is one third of the inner because acceleration varies inversely with radius. Find each linear speed and the outer inward acceleration magnitude. Explain all three errors.
Step-by-Step Solution
Common angular speed: ω = 2π/3 rad/s. Inner speed = 0.60ω ≈ 1.257 m/s; outer = 1.80ω ≈ 3.770 m/s. Equal periods do not give equal speeds.
Direction change: Constant speed still gives nonzero inward acceleration.
Fixed ω: ac = ω²r. Outer ac ≈ 7.896 m/s², three times the inner value. The inverse-radius relationship applies at fixed linear speed, which is not this comparison.
☷ CHALLENGE — What Changes at a Fixed Period?
DOK 2 — ApplyWhat Changes at a Fixed Period?
All cards compare with the same rotating platform at an unchanged nonzero period. Classify each listed quantity after doubling the marker’s radius.
0 / 6 correct
Physics Insight
At fixed linear speed, larger r lowers radial acceleration. At fixed angular speed or period, larger r raises it. Always state the held quantity.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain why the outer rider on a rigid roundabout travels farther and faster per turn than an inner rider, even though their revolution time is the same. Explain why both accelerate at steady speed and how the acceleration directions change.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 5.2 — Circular Motion
Track the angle, the tangent and the inward change.
1. Radians and uniform rotation
θ = s/r; ω = 2π/T; v = rω = 2πr/T
s is arc length in m, r is radius in m, θ is angle in rad and ω is angular speed in rad/s. One revolution is 2π rad = 360°. Use radians in angular equations. The lab’s signed angular velocity is positive for counterclockwise and negative for clockwise motion.
2. Period and frequency
f = 1/T
T is seconds per revolution; f is revolutions per second in Hz. Points carried on the same rigid rotating platform share period, frequency and angular speed. Their linear speeds grow with radius.
3. Instantaneous velocity and acceleration
Velocity is tangent to a circular path, perpendicular to the radius. In uniform circular motion acceleration points inward, with ac = v²/r = ω²r, perpendicular to velocity. A constant speed can coexist with changing velocity direction.
For changing-speed circular motion, tangential acceleration changes speed and the total acceleration is the vector sum of radial and tangential components. The entire acceleration is then not generally inward.
4. A finite interval is not an instant
Average acceleration is Δv/Δt, using vector subtraction. For uniform motion across a symmetric arc, Δv points inward at the midpoint of that arc. It need not point inward at either endpoint. Taking the limit of a vanishing interval gives the instantaneous inward acceleration.
For example, an up velocity followed by an equal-magnitude left velocity gives a change left and down. Subtract components instead of subtracting speed magnitudes.
5. Hold the right quantity fixed
At fixed period, doubling r doubles v and ac, since ω is fixed. At fixed linear speed, doubling r halves ac. At fixed r, doubling T halves v and quarters ac. These are different experiments.
6. Release keeps velocity; forces determine the next path
Immediately after a smooth release, velocity remains tangent. With no resultant force, it continues straight. Under gravity, an unsupported released ball follows a projectile trajectory whose initial velocity is tangent. Do not describe an actual hammer throw as straight force-free motion while gravity remains.
7. Operate the live two-marker lab
The outer marker at r and inner marker at r/2 share the same instantaneous angle. The cyan velocity arrows are tangent and the green acceleration arrows inward. Direction is exact; vector lengths and diagram radius are schematic. Read the physical units in the measurements.
Run, pause, step and reset. The animation advances at the stated physical period. The position graph traces x and y against time; its values are coordinates, not speed or energy. Compare two periods, then a radius change. Reverse rotation to change velocity directions and signed angular velocity while preserving speed and acceleration magnitudes.
A Level 12.1–12.2 covers radians, angular speed and uniform circular acceleration. AP Physics 1 2.9.A distinguishes radial and tangential acceleration and relates period to frequency.
✓ Crest’s Checklist
- I distinguish arc length from chord displacement.
- I use radians in angular equations.
- I relate period and frequency correctly.
- I distinguish linear speed from angular speed.
- I distinguish finite average from instantaneous acceleration.
- I state remaining forces after release.
— Crest ☆ “Track the angle, the tangent and the inward change.”
Mission 5.2 Complete! · All 10 levels cleared · PHYSICS CREST
★ Master of Circular Motion
Same period means same angular speed, not same linear speed. Inward acceleration depends on which motion quantity is held fixed.