Skip to lesson
PC

PHYSICS CREST

Global Physics Academy

Mission 5.1 · Centripetal Force Identify the real forces. Add their inward components.
Journey Tracker
Progress
0/10
1

WONDER — The Mystery

Water at the Top of the Circle

At the top of a sufficiently fast vertical bucket motion, water can stay in contact with the bucket floor. Gravity points downward, toward the circle’s center at that instant. What radial resultant is required, and what can the bucket’s contact force contribute?

Top-of-circle modelWater at top of circleCenter directly belowGravity acts downwardBucket contact is possible
Given conditions only; arrows and distances are schematic.

Model: Use an inertial frame. Centripetal force means the inward radial resultant, not an extra interaction. For changing speed, a tangential resultant may exist as well. Vertical-loop contact results apply to a particle against the inside of an unrestrained smooth track.

2

PREDICT — Commit to Your Answer

DOK 2 — Predict

A fixed-mass particle needs an inward resultant of 150 N at a particular speed and radius. At the same radius, what is required when its speed doubles?

Comparison givensInitial radial force: 150 NSpeed doublesMass and radius fixed
Given conditions only; arrows and distances are schematic.

Commit to both a prediction and a reason before revealing the explanation.

Step 1: Pick your answer.

STOP! Before revealing — why did you pick that?

3

▶ PLAY — Live Circle and Tangent Release

DOK 2 — Investigate

Predict, measure and compare

Measure two speeds at the same mass, radius and mode. Then change only mass from one of that pair. Run three matched setups. Use release mode to observe the path when the inward interaction is removed.

A particle moves on a frictionless horizontal plane. Weight and support cancel vertically. A controllable radial interaction supplies the entire horizontal force for uniform circular motion. Mode 0 measures one revolution; mode 1 switches that interaction off after a quarter revolution and follows force-free straight motion for another quarter-period. Speed is constant throughout. The physical angular rate is v/r; the sketch is rescaled to each radius. Arrow directions are exact; lengths are schematic.

Use the labelled readouts.

Status: Ready

Playback: 2 simulation seconds per real second. Pause or Step for measurements.

Horizontal Force Component vs Time

Use the labelled readouts.

Measurements

Horizontal net-force magnitude:
Horizontal acceleration magnitude:
Signed horizontal force Fx:
Signed horizontal force Fy:
Physical position (x, y):
Circle period before release:
Kinetic energy:
Elapsed simulation time:

Load givens — then predict and run

Loading a setup earns no trial credit.

4

♢ DISCOVER — Radial Resultant and Real Interactions

DOK 1 — Recall

Flip all 4 rule cards. Keep the quantities and model conditions clear.

Rule 1

Use a radial force equation

Click to flip

Use a radial force equation

ΣFinward = mv²/r = mac. Resolve real forces along the inward direction. Do not draw an extra centripetal force beside tension, gravity or normal force.

Rule 2

Separate radial and tangential changes

Click to flip

Separate radial and tangential changes

The radial acceleration v²/r changes velocity direction. A tangential acceleration changes speed. Only in uniform circular motion is the whole net force purely radial and perpendicular to velocity.

Rule 3

Check the contact model

Click to flip

Check the contact model

At the top of a smooth inside loop, mg + N = mv²/r. Unrestrained contact requires N ≥ 0. At the bottom, N − mg = mv²/r. Weight alone can supply the top’s radial force at the minimum contact speed.

∫

Rule 4

State the reference frame

Click to flip

State the reference frame

An inertial-frame force diagram uses real interactions. A rotating frame can use an apparent centrifugal term when applying a modified equation of motion. That term is not another physical interaction.

Flip all 4 cards to reveal the rules. 0/4 flipped
5

MISCONCEPTION ATTACK — Destroy the Myths

DOK 2 — Analyze

Choose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.

Myth 1: “At constant speed around a circle, acceleration is zero.”

Myth 2: “A ball on a string has tension plus an additional centripetal interaction force.”

6

✦ THE SECOND “AHA!” — Source, Direction and Contact

DOK 2 — Apply

Add actual force components, rather than inventing a balancing outward interaction.

Progress
0/4
Top-of-circle modelWater at top of circleCenter directly belowGravity acts downwardBucket contact is possible
Given conditions only; arrows and distances are schematic.

1

Instructor Q1 — Remove the Interaction

A particle in uniform circular motion on a frictionless horizontal plane loses its radial interaction. What path follows while no horizontal force acts?

2

Instructor Q2 — Top of an Inside Loop

For a particle in contact at the top of a smooth inside loop, which real forces have inward components?

3

Instructor Q3 — Radial Acceleration

A particle moves at 6 m/s on a circle of radius 3 m. Find the inward acceleration magnitude.

Acceleration givensSpeed: 6 m/sRadius: 3 m
Given conditions only; arrows and distances are schematic.
m/s²
4

Instructor Q4 — Radial Resultant

A 2 kg particle requires inward acceleration 12 m/s². Find its inward radial resultant force.

Force givensMass: 2 kgInward a: 12 m/s²
Given conditions only; arrows and distances are schematic.
N
7

✎ PRACTICE — Independent Circular-Force Cases

DOK 1–3 — Practice
DOK 1 — Routine

Challenge 1: A Level Turn

A 1100 kg car moves at constant speed 14 m/s on a level circular path of radius 40 m. Find the required inward horizontal resultant force.

Turn givensMass: 1100 kgSpeed: 14 m/sRadius: 40 mLevel circular path
Given conditions only; arrows and distances are schematic.
N
DOK 2 — Application

Challenge 2: A Timed Quarter Turn

A 68 kg runner travels a quarter of a circle of radius 9 m in 1.80 s at constant speed. Find speed, inward acceleration magnitude and inward resultant force magnitude.

Timed-turn givensMass: 68 kgRadius: 9 mQuarter-circle intervalElapsed time: 1.80 sConstant speed
Given conditions only; arrows and distances are schematic.
m/s
m/s²
N
DOK 3 — Audit & Justify

Challenge 3: Audit the Top-of-Loop Diagram

A 420 kg particle is at the top of the inside of a smooth, unrestrained vertical circular track of radius 8 m, moving at 12 m/s. Use g = 9.8 N/kg. A student draws a separate centripetal force in addition to weight and normal force, draws the normal upward, and says constant speed means zero acceleration. Find the inward radial resultant, track normal magnitude and inward acceleration magnitude at this instant. Explain all three errors.

Loop-report givensMass: 420 kgTop speed: 12 m/sRadius: 8 mg = 9.8 N/kgSmooth inside contact
Given conditions only; arrows and distances are schematic.
N
N
m/s²
8

☷ CHALLENGE — Identify the Horizontal Radial Source

DOK 2 — Apply

Identify the Horizontal Radial Source

Each card gives an ideal uniform circular-motion case in an inertial frame. Choose the real interaction providing its horizontal or orbital radial resultant.

0 / 6 correct

9

TEACH — The Feynman Technique

DOK 3 — Teach

Your Final Mission: Explain a passenger’s apparent sideways shift during a turn using an inertial road frame. Describe inertia, the contact force needed to turn the passenger and why a rotating-frame apparent force is a different description.

Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.

Type Your Explanation (≥ 3 sentences)

Final reward below

Hidden exam secrets inside — Crest's private notebook.