Skip to lesson
PC

PHYSICS CREST

Global Physics Academy

Mission 4.2 · Potential Energy Choose a reference. Track the energy change.
Journey Tracker
Progress
0/10
1

WONDER — The Mystery

Energy in a Configuration

A raised wrecking ball can be momentarily stationary, and an ideal compressed spring can be held at rest. Their configurations still store energy. Which objects and interactions belong to each system, and what changes when a zero reference is moved?

Raised-ball givensEarth and raised ballBall momentarily at restUniform near-surface fieldA reference level is chosen
Given conditions only; arrows and distances are schematic.

Model: Gravitational potential energy belongs to the Earth–object system; use a uniform g = 9.8 N/kg near the surface. Elastic energy belongs to an ideal Hooke’s-law spring system within its elastic range. Potential energy is measured in J, not power in W, and can coexist with motion.

2

PREDICT — Commit to Your Answer

DOK 2 — Predict

Three identical 2 kg bricks are at heights 1 m, 2 m and 4 m above the same level chosen as U = 0. Use uniform g = 9.8 N/kg. What is U for the 4 m brick?

Brick givensMass of each: 2 kgHeights: 1 m, 2 m, 4 mZero reference: 0 mg = 9.8 N/kg
Given conditions only; arrows and distances are schematic.

Commit to both a prediction and a reason before revealing the explanation.

Step 1: Pick your answer.

STOP! Before revealing — why did you pick that?

3

▶ PLAY — Gravity Drop and Ideal-Spring Loading

DOK 2 — Investigate

Predict, measure and compare

In gravity mode, compare two initial heights at the same mass and reference. Then change only mass from one of that pair. Measure three matched setups. Move the zero level and explore spring extension or compression.

Mode 0: free fall from rest to y = 0 in a uniform field, with no drag; end is just before impact. Earth and body are selected. Mode 1: a quasistatic ideal-spring loading path, sampled over 3 s; kinetic energy is neglected and external work supplies elastic energy. Inactive controls are disabled. Gravity plots U versus y; spring plots applied force versus deformation. Only force–deformation area represents work.

Use the labelled readouts.

Status: Ready

Playback: 1 simulation seconds per real second. Pause or Step for measurements.

Energy or Force Graph · Model Labelled

Use the labelled readouts.

Measurements

Current height / deformation:
Current potential energy:
Potential energy change from start:
Current kinetic energy:
Tracked mechanical energy:
Gravity work / external spring work:
Weight / applied spring force:
Elapsed time:

Load givens — then predict and run

Loading a setup earns no trial credit.

4

♢ DISCOVER — Systems, Reference and Deformation

DOK 1 — Recall

Flip all 4 rule cards. Keep the quantities and model conditions clear.

Rule 1

Name the interacting system

Click to flip

Name the interacting system

Gravitational PE is associated with Earth and object together. Elastic PE is associated with spring deformation. A system can have potential energy while moving; PE does not require zero speed.

Rule 2

Use vertical change in uniform gravity

Click to flip

Use vertical change in uniform gravity

ΔUg = mgΔy. With zero chosen at yref, Ug = mg(y − yref). Ramp path length is not vertical height. Ug may be negative under a valid reference; changes do not depend on that reference.

Rule 3

Use the ideal-spring model

Click to flip

Use the ideal-spring model

For an ideal Hookean spring, Us = ½kx² relative to its undeformed state. x is signed stretch or compression; squaring makes either deformation store nonnegative energy under that zero.

∫

Rule 4

Read the correct graph

Click to flip

Read the correct graph

The area under applied force versus deformation gives quasistatic work stored in the ideal spring. An energy-versus-height graph shows energy values and has slope mg; its area is not potential energy.

Flip all 4 cards to reveal the rules. 0/4 flipped
5

MISCONCEPTION ATTACK — Destroy the Myths

DOK 2 — Analyze

Choose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.

Myth 1: “A body on the floor must have zero gravitational potential energy under every reference choice.”

Myth 2: “A spring compressed by x stores negative energy because x is negative.”

6

✦ THE SECOND “AHA!” — Reference and Graph Type

DOK 2 — Apply

Potential energy describes a configuration and a reference. Power describes a rate; the terms are not interchangeable.

Progress
0/4
Push-off givensSkater A: 100 kgSkater B: 50 kgInitially both at restHorizontal impulse ≈ 0
Given conditions only; arrows and distances are schematic.

1

Instructor Q1 — Move the Zero

The gravitational zero is moved upward. What happens to the energy change for the same lift in the same uniform field?

2

Instructor Q2 — Read a Spring Graph

For quasistatic loading of an ideal spring, which graph area gives the stored elastic energy increase?

3

Instructor Q3 — Gravitational Change

A 3 kg body rises vertically by 2 m in uniform g = 9.8 N/kg. Find ΔUg.

Lift givensMass: 3 kgVertical rise: 2 mg = 9.8 N/kg
Given conditions only; arrows and distances are schematic.
J
4

Instructor Q4 — Spring Compression

An ideal spring with k = 100 N/m is compressed by 0.20 m. Its undeformed state defines zero elastic energy. Find its stored energy.

Spring givensk = 100 N/mCompression: 0.20 mUndeformed U = 0
Given conditions only; arrows and distances are schematic.
J
7

✎ PRACTICE — Independent Potential-Energy Cases

DOK 1–3 — Practice
DOK 2 — Application

Challenge 1: Raising a Container

A 4.2 kg container is raised from y = 0.80 m to y = 2.60 m in a uniform gravitational field of 9.8 N/kg. Calculate the change in gravitational potential energy of the Earth–container system.

Container givensMass: 4.2 kgInitial y: 0.80 mFinal y: 2.60 mg = 9.8 N/kg
Given conditions only; arrows and distances are schematic.
J
DOK 2 — Application

Challenge 2: Compression to Extension

An ideal spring with k = 350 N/m changes from deformation −0.18 m to +0.12 m relative to its natural length. Find the signed change in elastic potential energy and total work by the spring on its attached body over that change.

Deformation givensk = 350 N/mInitial x: −0.18 mFinal x: +0.12 mIdeal elastic spring
Given conditions only; arrows and distances are schematic.
J
J
DOK 3 — Audit & Justify

Challenge 3: Audit the Ramp and Reference

An 8 kg load moves along a 7 m ramp from vertical coordinate y = 1.10 m to y = 3.50 m. Uniform g = 9.8 N/kg; U = 0 is chosen at y = 2.00 m. A student uses 7 m as the height change, says a negative initial U would be impossible, and says gravity does positive work during this rise. Calculate initial U, ΔU and work by gravity. Explain all three errors.

Ramp-report givensMass: 8 kg; path: 7 mInitial y: 1.10 mFinal y: 3.50 mZero at y = 2.00 mg = 9.8 N/kg
Given conditions only; arrows and distances are schematic.
J
J
J
8

☷ CHALLENGE — Compare Energy Changes and Stores

DOK 2 — Apply

Compare Energy Changes and Stores

Compare each case with its baseline. Gravitational cases use uniform g and the stated rise; spring cases use an ideal spring with zero at natural length. Classify the multiplicative effect on the specified quantity.

0 / 6 correct

9

TEACH — The Feynman Technique

DOK 3 — Teach

Your Final Mission: A younger learner calls a raised object’s potential energy “stored power” and says a compressed spring must have negative energy. Explain energy versus power, the interacting system, the chosen reference and why ideal spring deformation is squared.

Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.

Type Your Explanation (≥ 3 sentences)

Final reward below

Hidden exam secrets inside — Crest's private notebook.