WONDER — The Mystery
The “Falling Package” Mystery
A rescue plane flies horizontally at a constant +50 m/s. It releases a package without pushing it. In the ideal model, air resistance is neglected and gravity is uniform and downward. A ground observer watches: does the package fall vertically below the release point, or move forward as it falls? Does it remain beneath the plane?
Today’s mission: use independent horizontal and vertical motion components with one shared time. Distinguish velocity arrows from force arrows. Quantitative practice uses g = 10 m/s²; upward and rightward are positive unless stated otherwise.
PREDICT — Commit to Your Answer
DOK 2 — PredictA snowmobile moves on level ice with constant horizontal velocity. A flare is fired straight up relative to its launcher. Ignore air resistance; assume uniform downward gravity and unchanged snowmobile velocity. Where does the flare return to its launch height?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction: C. Reason 1.
The flare already shares the snowmobile’s horizontal velocity before launch. With zero horizontal resultant, it retains that velocity. Both move forward by the same amount during the same time, so the flare returns to the moving launcher’s horizontal position.
To a ground observer the flare follows a curved path. To an observer moving with the constant-velocity snowmobile, its motion is vertical. Gravity remains downward in both inertial frames.
▶ PLAY — The Gravity Switch Simulator
DOK 2 — InvestigateWhat you will DO and OBSERVE
- • DO: predict, then launch or step two balls from the same height at the same instant.
- • OBSERVE: the cyan ball has the selected horizontal velocity; the gold ghost is dropped. Both start with uᵧ = 0.
- • DISCOVER: complete two gravity-ON trials at the same height with different horizontal speeds, and one gravity-OFF control at the same height and speed as one of them.
An ideal flat-ground, uniform-field model with no drag; right and up are positive. Gravity ON uses g = 10 m/s². Both balls have identical vertical initial conditions. ON trials stop at first ground contact and display the limiting values just before impact. OFF is a hypothetical force-free comparison observed for 4 s; it is not a near-Earth projectile. Changing any given starts a fresh trial.
Cyan: launched ball. Gold ring: dropped ghost. Both use the same metre scale on x and y. The viewport adapts to the full trial, then stays fixed; neither ball wraps at a screen edge.
Status: Ready
Velocity Components vs Time
One signed velocity scale and one shared time axis, fixed within the trial. The dropped ghost’s vₓ is zero. Both vertical traces coincide.
ON · g = 10 m/s²
Live Readouts
Same vertical motion, same impact time. Horizontal speed changes the range, not the fall time in this ideal model.
Try these experiments
Predict the default trial, then complete its flight.
0 / 3 distinct trials completed
DISCOVER — The Golden Rules
DOK 1 — RecallFlip all four cards to connect the ideal force model, independent components, shared time and reference frames.
Rule #1
After launch: weight only
Click to flip
After launch: weight only
A freely flying projectile near Earth, with no drag and no continuing contact or thrust, has only weight as a significant force. Weight points down. The force of the hand or bat ends when contact ends; velocity is not a force.
Rule #2
Two components, one time
Click to flip
Two components, one time
Choose +x right and +y up. Uniform downward gravity gives aₓ = 0 and aᵧ = −g. Hence vₓ = uₓ is constant, while vᵧ = uᵧ − gt. Components can be analyzed separately, but they describe the same object during the same elapsed time.
Rule #3
Match the vertical conditions
Click to flip
Match the vertical conditions
Simultaneous releases from the same height to the same level ground, with the same uᵧ and g, have the same fall time. Changing only uₓ changes horizontal displacement. If height, vertical launch velocity or landing level differs, equal flight times are not guaranteed.
Rule #4
Frames and the highest point
Click to flip
Frames and the highest point
A released package retains the plane’s horizontal velocity at release. It stays beneath a plane that keeps that velocity in the ideal model. For an oblique launch, vᵧ = 0 at the highest point, but vₓ remains and acceleration is still downward. A ground-frame path is parabolic when vₓ ≠ 0.
All four rules explored. Treat each component with its own acceleration and the same time.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth #1: “An upward-moving projectile must still have an upward force.”
Correct — the claim is false.
False. After contact ends and drag is neglected, only weight acts. Its acceleration is downward even while vertical velocity is upward. The upward velocity decreases until the ball turns; no lingering force of the hit is needed.
Myth #2: “Gravity increases a projectile’s horizontal speed as it falls.”
Correct — the claim is false.
False. Uniform vertical gravity has no horizontal component, so aₓ = 0 and vₓ stays constant. The downward vertical speed can increase, causing total speed to increase without any increase in horizontal speed.
Both myths corrected. Keep force, velocity components and total speed distinct.
✦ THE SECOND “AHA!” — Two Components, One Flight
DOK 2 — ApplyAnswer two conceptual and two numerical questions. Use the stated ideal assumptions and g. Guides appear only after an attempt. All four correct answers are required.
Your projectile toolkit
Question progress
Waiting for Q1...
Instructor Q1 — Same Fall Time
Ball A is dropped and ball B is launched horizontally at the same instant from the same cliff height. Both have uᵧ = 0, uniform g and no drag, and land on the same level ground. Which reaches it first?
Instructor Q2 — Force vs Velocity
A baseball is moving upward and right after losing contact with the bat. Neglect air resistance. Which force acts during free flight?
Instructor Q3 — Vertical Time
A ball is released horizontally from a height of 45 m above level ground. Use g = 10 m/s² and no drag. Find its fall time in s.
Instructor Q4 — Horizontal Displacement
A ball is launched horizontally at +14 m/s from a height of 20 m. Use g = 10 m/s² and no drag. Find its horizontal displacement to level ground in m.
4/4 — Projectile Toolkit Ready!
Now solve fresh release scenarios and audit three linked misconceptions.
✎ PRACTICE — Drops, Components and Forces
DOK 1–3 — PracticeChallenge 1: The Rescue Drop
A plane flies horizontally at +32 m/s and releases a package without pushing it. The package reaches the ground after 4.5 s. Neglect drag. Find its horizontal displacement from the release point.
Step-by-Step Solution
The package retains vₓ = +32 m/s. Δx = vₓt = 32 × 4.5 = +144 m.
Challenge 2: The Helicopter Drop
A helicopter moves horizontally at +18 m/s, 80 m above level ground. It releases a package without pushing it. Neglect drag and use uniform g = 10 m/s². Find the fall time and horizontal displacement from the release point.
Step-by-Step Solution
At release uᵧ = 0. With upward positive, 0 = 80 − ½ × 10 × t². Therefore t = √16 = 4 s.
Δx = 18 × 4 = +72 m. The horizontal speed does not determine the fall time.
Challenge 3: Audit the Baseball Diagram
A 0.40 kg baseball has left the bat and is moving with vₓ = +12 m/s and vᵧ = +16 m/s. Ignore drag; use g = 10 m/s², +x right and +y up. A student draws a continuing “force of the hit” upward and rightward as well as downward weight; says positive vₓ requires positive aₓ; and says the ball’s total velocity and acceleration both become zero at its highest point. Enter the correct aₓ, signed aᵧ and total speed at the highest point. Explain all three report errors.
Step-by-Step Solution
Force diagram: after contact ends, the force of the bat is gone. With drag neglected, only downward weight acts: mg = 0.40 × 10 = 4 N. Velocity is not a force, and inertia is not an extra force arrow.
Horizontal motion: Fₓ = 0, so aₓ = 0 m/s². The ball retains vₓ = +12 m/s; a positive velocity does not require positive acceleration.
Highest point: only vᵧ becomes zero. The horizontal component is still +12 m/s, so total speed is 12 m/s. Weight remains, so aᵧ = −10 m/s² at the highest point and throughout free flight. The acceleration is not zero there.
☷ CHALLENGE — The Independence Sort
DOK 2 — ApplySix Statements, Two Components
Classify each statement by what it describes: the horizontal component, the vertical component, or the whole projectile. Use the ideal uniform-gravity, no-drag model. Select a card, then a category. Select a placed card to return it to the bank. Complete all six correctly.
0 / 6 correct
Physics Insight — Independent Components, Shared Time
The two components have different accelerations but share the same elapsed time. Uniform downward gravity and nonzero constant vₓ give a parabolic ground-frame path. If vₓ = 0, the trajectory is vertical instead.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: your younger sibling watches a rescue plane and says: “Release the package directly above the target so it falls straight down onto it!” Explain why the pilot must release earlier, and distinguish the ground observer’s motion from the motion seen by someone travelling with the plane. Use the stated ideal model.
Explain the retained horizontal velocity, the vertical fall and the shared flight time. State the assumptions needed for the package to remain below the plane. Type at least three short sentences, or draw at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw and label the package’s motion from release to the target, separating velocity from force. Show the release position before the target. Use at least three purposeful strokes; this checks effort, not scientific correctness.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 3.8 — Projectile Motion Introduction
The rescue plane and the snowmobile flare.
The ideal projectile toolkit
After launch, with no continuing contact or thrust, neglect drag and use uniform downward gravity near Earth. Weight is the only significant force.
Fₓ = 0; Fᵧ = −mg
aₓ = 0; aᵧ = −g
Choose +x right and +y up. The same elapsed time belongs to both components:
vₓ = uₓ; Δx = uₓt
vᵧ = uᵧ − gt
y = y₀ + uᵧt − ½gt²
This mission’s numerical questions use g = 10 m/s². Use the value given in any particular question; do not change it silently.
1. What makes an object a projectile?
A thrown ball or a released package follows the ideal projectile model during free flight when gravity is its only significant force. The launcher’s contact force acts while contact exists. After separation, it does not travel with the object as a lingering “force of the throw.”
A velocity arrow shows how the object moves; a force arrow shows an interaction acting on it. Inertia is the tendency to retain velocity when the resultant is zero. It is not a forward force to add to a free-body diagram.
An object can move upward while its acceleration and weight point downward. Its positive vertical velocity decreases, reaches zero, then becomes negative. Its horizontal velocity stays constant if the horizontal resultant is zero.
2. Two components, one physical object
| Quantity | Horizontal component | Vertical component |
|---|---|---|
| Net force | Zero | −mg (down) |
| Acceleration | aₓ = 0 | aᵧ = −g |
| Velocity | vₓ = uₓ, constant | vᵧ = uᵧ − gt |
| Displacement | Δx = uₓt | Δy = uᵧt − ½gt² |
“Independent” means that, in this model, changing horizontal velocity does not change the vertical acceleration or vertical motion when the vertical initial conditions stay fixed. The components are linked by one shared time and describe one trajectory.
The general constant-acceleration relation Δx = uₓt + ½aₓt² is still valid horizontally. It simply reduces to Δx = uₓt because aₓ = 0. Do not mistake a useful simplification for a ban on the general equation.
3. Horizontal releases and fall time
A package released without a vertical push from a level, horizontally moving plane starts with uᵧ = 0 in the ground frame. It retains the plane’s horizontal velocity at the instant of release. For a release height h above level ground:
0 = h − ½gt²
t_fall = √(2h/g)
Δx = uₓ √(2h/g)
Take the positive fall time. These formulas require a horizontal release, uniform g, no drag and the stated ground level. They do not apply unchanged to an upward launch or a different landing height.
Example: a package is released at +12 m/s from 45 m above level ground, with g = 10 m/s². The fall time is √(90/10) = 3 s. Horizontal displacement is 12 × 3 = +36 m. Just before impact vᵧ = −10 × 3 = −30 m/s.
Two objects released simultaneously from the same height, with the same uᵧ, g and landing level, have identical vertical motion and the same landing time. One may be dropped while the other is launched horizontally. Different horizontal speeds then give different horizontal ranges.
4. Curves, straight lines and the highest point
With nonzero constant uₓ and uniform downward g, eliminate t using t = (x − x₀)/uₓ. The resulting y(x) contains a term proportional to −(x − x₀)², so the ground-frame trajectory is a parabola. Equal metre scales on both axes are needed to display its shape without stretching it.
If uₓ = 0, the trajectory is vertical. A gravity-OFF force-free control moves in a straight line at constant velocity; if its initial velocity is zero, it stays at rest. Neither control is an ordinary near-Earth projectile.
For an upward, oblique launch, the highest point is where vᵧ = 0. The horizontal velocity remains uₓ. The total speed there is |uₓ|, not generally zero. Weight still acts, so acceleration is still −g vertically and zero horizontally.
Total speed is √(vₓ² + vᵧ²). A falling object can gain total speed while vₓ stays unchanged, because the magnitude of its downward vertical velocity grows.
5. The plane, the flare and reference frames
A package dropped from a plane moving at constant horizontal velocity retains that same horizontal velocity in the ideal no-drag model. Both move forward equally during any given interval, so the package remains beneath the plane while falling. A ground observer sees forward motion and downward motion together.
An observer travelling with that constant-velocity plane sees no horizontal motion of the package relative to the plane, so the release looks like a vertical drop. This is a different description in a different inertial frame; gravity is still downward.
Similarly, a flare fired vertically relative to a constant-velocity snowmobile already has the snowmobile’s horizontal velocity in the ground frame. It returns to the moving launcher when it reaches the launch height, under the stated ideal conditions.
The conclusion can fail if the vehicle accelerates, the projectile receives a horizontal push, or drag and wind matter. Independence in the ideal model is not an unconditional rule for every real flying object.
6. Why release before the target?
The payload moves forward while it falls, so releasing directly over the target carries it beyond the target in the ideal model. For a horizontal release, the required lead distance is uₓ times the fall time. The release point must be that horizontal distance before the target.
Real air drops also involve drag, wind, aircraft conditions and sometimes parachutes. The ideal model is a classroom approximation, not a complete operational air-drop calculation.
7. Read the Gravity Switch simulator
The cyan ball is launched horizontally and the gold ghost is dropped at the same instant from the same point. Both start with uᵧ = 0. Gravity ON uses uniform g = 10 m/s² and both reach level ground at t = √(2h/g). Their heights and vertical velocities agree at every shared time.
The display pauses at the exact first-contact time. Its endpoint velocities and accelerations are free-flight values just before impact; the model does not simulate a collision, bounce or motion afterward.
Gravity OFF removes gravity as a hypothetical force-free control. Both keep their initial vertical height. The launched ball retains its selected horizontal speed; the ghost remains still. Observe for exactly 4 s regardless of speed or screen size.
Changing horizontal speed, height or gravity mode starts a fresh trial at t = 0. Launch/Resume advances physical time; Pause freezes it; Step adds 0.25 s, capped at the endpoint; Reset returns to the same initial conditions. A preset loads givens without autoplay or credit.
The position plot uses the same pixels per metre on x and y. Its viewport adapts to contain the entire chosen trial, then remains fixed. Neither ball wraps or stops at a screen edge. The velocity plot uses one shared time axis and one signed velocity scale, fixed within each trial.
Complete two gravity-ON trials at the same height with different horizontal speeds, plus a gravity-OFF comparison at the same height and speed as one of them. Loading or repeating identical givens earns no extra trial credit.
Crest’s Exam Secrets
Read the vertical launch condition
“Dropped” or “released without a push” from a horizontally moving vehicle gives uᵧ = 0, not zero total velocity. “Fired upward” can have uᵧ ≠ 0. Do not transfer a horizontal-release fall-time formula to a different vertical launch.
Keep the signs consistent
With upward positive, aᵧ = −g, downward vᵧ is negative, and a landing below release has negative Δy. With downward positive, those signs change consistently. The physical prediction remains the same.
Check equal-time conditions
Same horizontal velocity is not needed for equal fall times. Matching vertical initial conditions, uniform g and the same landing level are needed. Simultaneous release is needed if comparing clock times of impact.
Separate force from velocity
Draw only interactions on the chosen object in its free-body diagram. An upward or sideways velocity does not add an upward or sideways force. At the highest point, ask which velocity component vanishes and which force still acts.
✓ Crest’s Checklist
- I state the no-drag, uniform-gravity assumptions.
- I choose a frame and positive axes.
- I keep horizontal and vertical velocity components distinct.
- I use one shared elapsed time.
- I check height, vertical launch velocity and landing level.
- I distinguish force arrows from velocity arrows.
- I know that only vᵧ vanishes at the top of an oblique flight.
- I report signed components and non-negative total speed correctly.
— Crest ✨ “Two components. One time. Gravity points down.”
Mission 3.8 Complete! · All 10 levels cleared · PHYSICS CREST
Master of Projectile Motion
You separated motion components, compared fall times and audited force and velocity diagrams.