WONDER — The Mystery
The Stubborn Statue
A stone statue resists a small push and remains at rest. After a larger push starts it sliding, it feels easier to keep moving for this pair of surfaces. Why can the friction force change between sticking and sliding?
Model: Ideal dry-contact friction, with the stated coefficients. Uniform g = 9.8 m/s² for numerical tasks. Kinetic friction opposes relative sliding; static friction prevents a tendency to slip. AS requires qualitative friction, while coefficient calculations here follow AP Physics 1.
PREDICT — Commit to Your Answer
DOK 2 — PredictA horizontal box remains at rest with a push of 80 N. Its limiting static friction is 100 N. No other horizontal forces act. What friction magnitude acts now?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
The stated stationary box has zero horizontal acceleration. Friction balances the 80 N push; 100 N is its limiting value, not its actual value now.
▶ PLAY — Microscopic Grip — Force Snapshot
DOK 2 — InvestigatePredict, measure and compare
Compare the same contact state and normal force with different pushes. Then change only the normal force from one of that pair. Observe three distinct matched setups for one second each.
Force-regime snapshots, not a motion animation. Start state 0 means a fresh stationary box; state 1 means the contact is already sliding right. μₛ = 0.5 and μₖ = 0.3. Vertical forces balance, with weight equal to the given normal force. +x is right.
Status: Ready
Playback: 1 simulation seconds per real second. Pause or Step for measurements.
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Rules of Friction
DOK 1 — RecallFlip all 3 rule cards. Keep the quantities and model conditions clear.
Rule 1
Microscopic contact
Click to flip
Microscopic contact
Surface deformation and adhesion contribute to friction. The “teeth” picture is an analogy for microscopic contacts, not a literal description of visible teeth. Lubrication and rolling bearings change contact interactions.
Rule 2
Normal force
Click to flip
Normal force
In the dry-friction coefficient model, Fₛ,max = μₛN and Fₖ = μₖN. On a horizontal surface, N = mg only if no other vertical forces act and vertical acceleration is zero.
Rule 3
Check the contact
Click to flip
Check the contact
Static friction adjusts up to its maximum; it is not always μₛN. Kinetic friction applies when surfaces slide relative to one another. μₛ is typically greater than μₖ for dry surfaces, not universally so.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “Friction can never accelerate an object forward.”
Correct — the claim is false.
False. When a foot pushes backward on the ground without slipping, ground friction on the foot can act forward and accelerate the walker. Friction opposes relative slip or its tendency, not always ground-frame motion.
Myth 2: “For the stated dry-contact model, kinetic friction exceeds the limiting static friction.”
Correct — the claim is false.
False here: μₖ = 0.3 < μₛ = 0.5, so μₖN < μₛN. This relation is a stated model/material choice, not a universal friction law.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — The Two Contact Regimes
DOK 2 — ApplyAnswer using the stated contact motion and force balance. The lab’s observation clock is separate from a physical motion calculation.
Instructor Q1 — Stationary Contact
A box remains at rest under a 30 N horizontal push below its static limit. No other horizontal forces act. What friction magnitude acts?
Instructor Q2 — Steady Sliding
A box slides at constant velocity under a horizontal push with kinetic friction opposing it. What follows?
Instructor Q3 — Limiting Friction
Normal force is 300 N and μₛ = 0.4. Find the maximum static friction.
Instructor Q4 — Sliding Friction
Surfaces slide relative to each other. Normal force is 300 N and μₖ = 0.25. Find the kinetic friction magnitude.
4/4 — Instructor Questions Completed
Relative motion at the contact determines friction type; static friction adjusts within its limit.
✎ PRACTICE — Static, Limiting or Sliding?
DOK 1–3 — PracticeChallenge 1: The Heavy Crate
A 36 kg crate rests on a horizontal floor. No other vertical forces act; μₛ = 0.45 and μₖ = 0.28. Use g = 9.8 m/s². Find the normal force and the maximum static friction.
Step-by-Step Solution
N = mg = 36 × 9.8 = 352.8 N. Fₛ,max = 0.45N = 158.76 N.
Challenge 2: The Constant Slide
A separate 22 kg crate slides right at constant velocity on a horizontal floor. A horizontal push acts right; no other vertical forces act. μₛ = 0.36 and μₖ = 0.24. Use g = 9.8 m/s². Find the required push magnitude.
Step-by-Step Solution
N = 22 × 9.8 = 215.6 N. Sliding friction is 0.24N = 51.744 N. Constant velocity requires a matching 51.744 N push.
Challenge 3: Audit the Stationary Box
An 18 kg box remains at rest on a horizontal floor under a 60 N rightward push. No other applied or vertical forces act. μₛ = 0.50, μₖ = 0.20 and g = 9.8 m/s². A student reports: (i) normal force equals 18 N; (ii) actual static friction always equals μₛN; (iii) zero acceleration means no horizontal forces act. Calculate the normal force, actual friction magnitude and signed net horizontal force, with +x right. Explain all three errors.
Step-by-Step Solution
Normal force: mass is 18 kg, not 18 N. N = mg = 176.4 N here.
Actual static force: the limit is 0.5N = 88.2 N. Actual friction is 60 N left, balancing the push within that limit.
Net versus individual forces: 60 N right and 60 N left give zero net horizontal force. Balanced forces are not absent forces.
☷ CHALLENGE — The Walking Paradox
DOK 2 — ApplyThe Walking Paradox
Match each label to its force and receiving body. The walker and ground are different bodies: third-law partners do not belong together on the walker’s free-body diagram.
0 / 6 correct
Physics Insight
Static friction can help a walker move forward while preventing relative slipping at the planted foot.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: A sibling asks why mechanics lubricate engine parts or use ball bearings. Explain how these change microscopic contact interactions, using “teeth” only as an analogy. Mention that lubrication reduces direct contact and that some resistance still remains.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 3.14 — The Nature of Friction
Check contact motion. Identify the force.
1. Look at the contact
Static friction acts when contacting surfaces are not slipping relative to each other. It supplies the force needed to prevent a tendency to slip, up to a maximum. Kinetic friction acts during relative sliding and opposes that sliding.
|Fₛ| ≤ μₛN
Fₛ,max = μₛN
Fₖ = μₖN
The coefficients are dimensionless. They depend on the surface pair and conditions. For many dry pairs μₛ is greater than μₖ, but this is not universal. Use the values supplied in each problem.
2. Actual is not always maximum
A stationary box with only a small horizontal push and opposing friction has actual static friction equal to that push. The maximum tells you whether equilibrium is possible, not the value to use automatically.
Example: a 25 kg box on a flat floor has N = 245 N. With μₛ = 0.30, its static limit is 73.5 N. A 40 N horizontal push can be balanced by 40 N friction, not 73.5 N. At exactly the limiting force, rest remains possible in the ideal model; a greater force breaks static equilibrium.
3. Normal force has conditions
N is perpendicular to the contact surface. N = mg on a horizontal floor only when no additional vertical forces act and vertical acceleration is zero. An angled pull, angled push or incline changes the calculation.
In this simple coefficient model, increasing N increases limiting static and kinetic friction for the same coefficients. Actual static friction below its limit need not increase if the applied horizontal force stays unchanged.
4. Sliding does not mean accelerating forward
A box already sliding right has kinetic friction left. If the rightward push matches it, velocity is constant. If the push is smaller, net force and acceleration are left while the box may still move right and slow down. If the push is greater, it speeds up right.
Acceleration alone does not determine friction type; relative contact motion does. When sliding ends, the static condition must be checked again. Do not keep a kinetic formula running through a stop without reconsidering the state.
5. Friction and walking
A planted foot pushes backward on the ground. Ground friction on that foot acts forward. This can accelerate the walker even though no relative sliding occurs at the planted contact.
The backward foot-on-ground force and forward ground-on-foot force are equal, opposite and on different bodies. Weight and normal force on the walker are not a third-law pair. Balance of forces on one body differs from paired interactions between two bodies.
6. Microscopic models and lubrication
Friction involves deformation and adhesion at microscopic contacts. The “interlocking teeth” picture is a useful analogy for asperities, not a complete mechanism. Roughness alone does not universally determine the coefficient.
Lubricants reduce direct solid contact and change contact interactions; fluid resistance can remain. Bearings replace much sliding contact with rolling contact, typically reducing resistance. Neither device makes all resistance vanish.
7. Use the force snapshot lab
Choose a fresh box at rest or an already right-sliding contact. For a fresh rest state, push below or at μₛN can be balanced by static friction. Above that limit, the readout shows the right-sliding breakaway snapshot with kinetic friction. For already sliding contact, kinetic friction applies even if push is below the static limit.
The one-second observation interval records a force snapshot; the diagram does not simulate position, acceleration or eventual stopping. Arrows show actual forces with one adjustable force scale. Net force is listed separately, not drawn as an extra interaction.
Complete a matched push pair and a normal-force comparison. The AS syllabus requires qualitative friction and explicitly does not require coefficient treatment; the quantitative coefficient tasks in this mission follow AP Physics 1.
✓ Crest’s Checklist
- I identify relative motion at the contact.
- I distinguish actual and limiting static friction.
- I state when N = mg applies.
- I use the stated coefficients without assuming a universal inequality.
- I distinguish balanced forces from absent forces.
- I keep third-law partners on their own bodies.
— Crest ☆ “Check contact motion. Identify the force.”
Mission 3.14 Complete! · All 10 levels cleared · PHYSICS CREST
★ Friction Model Master
Relative motion at the contact determines friction type; static friction adjusts within its limit.