Skip to lesson
PC

PHYSICS CREST

Global Physics Academy

Mission 3.10 · Projectile Problem Solving Resolve. Calculate. Check the model.
Journey Tracker
Progress
0/10
1

WONDER — The Mystery

The “Perfect Shot” Mystery

You operate an ideal water-balloon launcher at a water park. A balloon leaves level ground at 50 m/s, 60° above the horizontal, and returns to that level. Neglect drag and use uniform gravity. How can one angled launch velocity supply the separate horizontal and vertical calculations?

Water-balloon launch+x →, +y ↑Level landing surfaceu = 50 m/sθ = 60° above +xg = 9.8 m/s²Equal levels
Given launch conditions; schematic arrow and distances. Components, trajectory and landing position are not supplied.

Today’s mission: use a consistent component workflow to calculate flight time, horizontal range and vertical rise. State the angle reference and check the launch and landing levels. All numerical tasks and labs use g = 9.8 m/s²; +x is right and +y is up. Gravity is a positive magnitude; its upward-axis component is negative.

2

PREDICT — Commit to Your Answer

DOK 2 — Predict

A training projectile leaves a springboard at 10 m/s, 80° above the horizontal. Which initial velocity component has the larger magnitude?

Springboard launch+x →, +y ↑Level landing surfaceu = 10 m/sθ = 80° above +xg = 9.8 m/s²Equal levels
Given launch conditions; schematic arrow and distances. Components, trajectory and landing position are not supplied.

Commit to both a prediction and a reason before revealing the explanation.

Step 1: Pick your answer.

STOP! Before revealing — why did you pick that?

3

▶ PLAY — The Water Balloon Launcher

DOK 2 — Investigate

Predict, run and compare

Complete three flights at one speed: 45° and a pair of distinct complementary angles. Compare their measured landing times, ranges and rises. Loading a preset earns no credit.

An ideal point projectile: equal launch/landing level, no drag, uniform g = 9.8 m/s², +x right and +y up. Gold combines the cyan horizontal and green vertical component motions. Ghosts are constructions, not extra objects or forces. Both position axes have the same metre scale, fixed during a trial. Flights stop at first ground contact; endpoint values are just before impact.

Use the labelled readouts.

Status: Ready

Signed Velocity Components vs Time

Cyan vₓ; green vᵧ.

Resolve the Initial Vector

uₓ:
uᵧ:

uₓ = u cos θ; uᵧ = u sin θ. θ is measured above +x.

Live Measurements

vₓ:
vᵧ:
aₓ:
aᵧ:
Horizontal Δx:
Vertical Δy:
Height y:
Total speed:
Elapsed time:
Motion phase:

Load an experiment — predict, then launch

Predict the default flight, then measure.

0 / 3 matched flights completed

4

♢ DISCOVER — The 5-Step Recipe

DOK 1 — Recall

Flip all five recipe cards. This is one consistent workflow; peak height can also be calculated independently once the vertical component is known.

Step 1

Resolve the velocity

Click to flip

Resolve the velocity

For θ measured above the horizontal: uₓ = u cos θ; uᵧ = u sin θ. State the axes and angle reference. If the angle is measured from the vertical, the sine and cosine roles exchange.

Step 2

Find time to peak

Click to flip

Find time to peak

For uᵧ > 0, set vᵧ = 0 in vᵧ = uᵧ − gt: tₚ = uᵧ/g. With +y upward, aᵧ = −g. This remains true while rising. g = 9.8 m/s² here is a positive magnitude.

Step 3

Find landing time

Click to flip

Find landing time

Use the actual vertical landing condition: Δy = uᵧT − ½gT². Select the physical positive time root. For an upward launch returning to the same level, T = 2tₚ. Check the levels before using this shortcut.

∫

Step 4

Find horizontal range

Click to flip

Find horizontal range

With aₓ = 0, vₓ = uₓ. Horizontal displacement is Δx = uₓT. For the rightward flights here, range R = Δx. Use the horizontal component and the landing time from the vertical motion.

∫

Step 5

Find rise to peak

Click to flip

Find rise to peak

Use the peak time: H = uᵧtₚ − ½gtₚ² = uᵧ²/(2g), for uᵧ > 0. H is vertical rise above release. Maximum height above ground is h + H if the release height is h.

Flip all 5 recipe cards to reveal the rules. 0/4 flipped
5

MISCONCEPTION ATTACK — Destroy the Myths

DOK 2 — Analyze

Choose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.

Myth 1: “For a 50 m/s launch at 60° above the horizontal, I can use 50 m/s directly in Δx = vt.”

Check the model+x →, +y ↑Level landing surfaceu = 50 m/sθ = 60° above +xg = 9.8 m/s²Equal levels
Given launch conditions; schematic arrow and distances. Components, trajectory and landing position are not supplied.

Myth 2: “A 45° launch always maximizes horizontal range, even when the landing level differs or drag matters.”

Check the model+x →, +y ↑Level landing surfaceu = 50 m/sθ = 60° above +xg = 9.8 m/s²Equal levels
Given launch conditions; schematic arrow and distances. Components, trajectory and landing position are not supplied.
6

✦ THE SECOND “AHA!” — The 45° Secret

DOK 2 — Apply

Compare three complete ideal trajectories at the same launch speed and level. Both axes use one metre scale. This teaching comparison displays full flights. Then answer all four instructor questions; support never replaces a correct answer.

Progress
0/4

THREE-ANGLE COMPARISON

Question progress

Waiting for Q1...

Cyan 30° · gold 45° · rose 60°. Equal release and landing height; g = 9.8 m/s²; no drag.

1

Instructor Q1 — Maximum Range

At one fixed launch speed, which of the plotted angles gives the largest horizontal range in this ideal same-level model?

2

Instructor Q2 — Model Boundary

Does the same 45° maximum necessarily apply if the landing level changes or drag matters?

3

Instructor Q3 — Complementary Angles

For 30° and 60°, what is the sum of the two launch angles, in degrees?

°
4

Instructor Q4 — Equal Components

For θ between 0° and 90°, at what angle above the horizontal are the two initial component magnitudes equal? Give degrees.

°
7

✎ PRACTICE — The G.U.E.S.S. Method

DOK 1–3 — Practice
DOK 1 — Routine Resolution

Challenge 1: The Water Balloon

A water balloon is launched at 32 m/s, 35° above the horizontal. Take +x right and +y up. Find the two signed initial velocity components.

Water-balloon release+x →, +y ↑Level landing surfaceu = 32 m/sθ = 35° above +xg = 9.8 m/s²Equal levels
Given launch conditions; schematic arrow and distances. Components, trajectory and landing position are not supplied.
m/s
m/s
DOK 2 — Application

Challenge 2: The Training Jump

An idealized training projectile is launched at 18 m/s, 55° above the horizontal, and returns to its release level. Neglect drag and use uniform g = 9.8 m/s². Find its time to peak, total flight time and vertical rise above release.

Same-level training jump+x →, +y ↑Level landing surfaceu = 18 m/sθ = 55° above +xg = 9.8 m/s²Equal levels
Given launch conditions; schematic arrow and distances. Components, trajectory and landing position are not supplied.
s
s
m
DOK 3 — Audit & Justify

Challenge 3: Audit the Launch Report

A ball leaves a ledge 12 m above level ground at 26 m/s, 40° above the horizontal. Use no drag, uniform g = 9.8 m/s², +x right and +y up. A student reports: (i) uₓ = 26 m/s; (ii) aᵧ = +9.8 m/s² because the ball rises initially; (iii) ground-contact time is twice time to peak. Calculate the correct uₓ, total ground-contact time and horizontal range. Explain all three report errors.

Ledge launch+x →, +y ↑Level landing surfaceu = 26 m/sθ = 40° above +xg = 9.8 m/s²Release height: 12 m
Given launch conditions; schematic arrow and distances. Components, trajectory and landing position are not supplied.
m/s
s
m
8

☷ CHALLENGE — The Pipeline Game

DOK 2 — Apply

Five Actions, One Consistent Workflow

Arrange the five actions in the workflow taught in this mission. Select a card, then its numbered slot. Select a placed card to return it to the bank. A slot holds one card; replacing it returns the old card. All five placements must be correct. Other calculation orders can also be mathematically valid.

Choose the quantities+x →, +y ↑Level landing surfaceu = 50 m/sθ = 60° above +xg = 9.8 m/s²Equal levels
Given launch conditions; schematic arrow and distances. Components, trajectory and landing position are not supplied.

0 / 6 correct

9

TEACH — The Feynman Technique

DOK 3 — Teach

Your Final Mission: two balloons are launched at the same speed, one at 75° and one at 15°, from and back to the same level, with no drag and uniform gravity. Your younger sibling says the steeper one must go farther because it rises higher. Explain why the ranges can be equal, using the component velocities and time aloft. State the model conditions.

Use simple words to explain how horizontal speed and time aloft combine. Type at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.

Two launch directions+x →, +y ↑Same speed uGold: 75°Cyan: 15°Equal release/landing level
Same launch speed and equal levels; angles are above the horizontal. Arrows are schematic. No answer paths or ranges are supplied.

Type Your Explanation (≥ 3 sentences)

Final reward below

Hidden exam secrets inside — Crest's private notebook.