WONDER — The Mystery
DOK 2 — ConceptualizeThe Emergency Braking System
A car is travelling east at 30 m/s on a straight track. In an idealized test it brakes with constant acceleration until it stops. The skid displacement is 45 m east. Investigators want the braking acceleration, but nobody timed the skid.
The investigators need to figure out the braking deceleration — but there's a problem. Nobody timed the skid! There's no stopwatch, no video, no t value.
The Mystery: the starting velocity, finishing velocity and skid displacement are known, but elapsed time is missing. Can a different relation connect the given quantities? Would skid length alone be enough if the initial speed were also unknown?
Every acceleration formula you've seen so far — a = (vf − vi) / t, d = vit + ½at² — needs TIME. But time is missing here! How can you calculate the deceleration from just vi, vf, and d, with no t in sight?
Today’s Mission: discover a constant-acceleration relation that omits elapsed time. Test braking and speeding up, choose consistent signs, and investigate why a squared velocity does not tell you the direction of motion.
PREDICT — Commit to Your Answer
DOK 2 — Predict🚗 Scenario: a car travels east at 20 m/s and brakes uniformly to rest over 50 m east. Take east as positive. Find its signed acceleration. No elapsed time is supplied.
Nobody timed the skid. Can you still find the acceleration?
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct Answer: A) a = −4 m/s²
Choose the relation containing the initial and final velocities, constant acceleration and signed displacement. With east positive: 0² = 20² + 2a(50), giving a = −4 m/s².
The Simple Truth: For constant acceleration, vf² = vi² + 2as eliminates t. Taking the initial motion as positive gives s = +50 m: 0 = 202 + 2a(50) → a = -4 m/s2. The negative sign means acceleration is opposite the chosen positive direction; because the car is moving positively and slowing, this is braking.
PLAY — The Braking Distance Calculator
DOK 2 — InvestigateWhat you will DO and OBSERVE
- • DO: in Find acceleration, set signed initial/final velocities and displacement. In Hold braking magnitude fixed, set initial velocity and |a|; the final velocity is zero and displacement is calculated.
- • OBSERVE: use Play/Pause/Step/Reset. Follow the car’s changing velocity and the v²–s graph.
- • DISCOVER: compare speeds under the same braking magnitude. Test westward motion and a reversal; squared velocity hides direction.
East/right is positive. This is a one-dimensional constant-acceleration model. Braking ends at rest in the fixed-magnitude mode. Time is derived internally for physically consistent playback; it is not a supplied datum in the no-time calculation.
Reading the diagram: horizontal signed position equals displacement from the start; vertical v² has units m²/s². A straight line has gradient 2a. Squared velocity has no direction sign; the arrow shows the current velocity. The track uses a fixed metre scale for each test.
Live Readouts
The stopping-distance comparison is valid only when the braking-acceleration magnitude is held the same.
DISCOVER — The Golden Rules
DOK 1 — RecallYou've played with the Braking Calculator. Now flip each card to reveal the four golden rules of the "No Time" equation.
Rule #1
The "No Time" Equation
Click to flip
vf² = vi² + 2as
vf2 = vi2 + 2as
vf = final velocity (m/s), vi = initial velocity (m/s), a = acceleration (m/s²), s = signed displacement (m).
Use this when acceleration is constant and you know vi, vf, and s (or a), while t is not given or not needed.
Rule #2
Stopping Distance
Click to flip
dstop = vi² / (2|a|)
0 = vi2 + 2as → dstop=s=-(vi2)/(2a)=(vi2)/(2|a|)
For straight braking to rest with the positive axis along the initial motion, s = dstop > 0 and a < 0. The idealized braking distance depends on vi² and the braking-acceleration magnitude |a|.
For the same |a|: double the initial speed → 4× the idealized braking distance.
Rule #3
When to Use It
Click to flip
Choose the equation and the root
Use vf² = vi² + 2as for constant acceleration when time is not required. Finding velocity gives a speed magnitude first: |vf| = √(vi² + 2as). Use the motion information to choose the sign. A negative radicand means the proposed endpoint is not reached under this model.
Rule #4
The Four Equations
Click to flip
Each Skips ONE Variable
- ① s = ½(vi+vf)t — "No a"
- ② s = vit + ½at² — "No vf"
- ③ vf² = vi² + 2as — "No t"
- ④ vf = vi + at — "No s"
Each equation skips ONE variable — pick the one matching your knowns!
All four rules unlocked!
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzePick TRUE or FALSE for each myth. The truth will be revealed instantly.
💀 Myth #1: "You always need time to solve kinematics problems."
Correct — the answer is FALSE.
For one-dimensional constant acceleration, vf² = vi² + 2as lets you solve for the missing motion quantity without using a numerical t. The motion still takes time; this particular relation simply eliminates it algebraically.
💀 Myth #2: "Stopping distance doubles when speed doubles."
Correct — the answer is FALSE.
For the same braking-acceleration magnitude, idealized braking distance scales with vi2: doubling vi gives 4× the braking distance and tripling vi gives 9×. Real total stopping distance also depends on reaction time, road, tyres, brakes and other conditions.
Myths destroyed! You're inoculated against the two biggest "no time" traps.
THE SECOND 'AHA!' — Instructor Drill
DOK 2 — ApplyYour instructor has 4 rapid-fire questions about the "no time" equation. The live braking scene on the left updates as you answer. Get all 4 right to unlock the practice round.
Live Braking Scene
Reading the diagram: each green tile records a correct response. Read the question figures for the given data.
Current Question Setup
Waiting for Q1...
Instructor Q1 — Which Equation Skips Time?
Which kinematic equation skips "time" (no t variable)?
Instructor Q2 — Doubling Speed
For the same braking-acceleration magnitude, if you double the initial speed, what happens to the idealized braking distance?
Instructor Q3 — Find Distance
Acceleration is constant; the car moves east until rest. Take east as positive. vi = 20 m/s, vf = 0, a = −5 m/s². Find the stopping distance d (in m). Use d = (vf2 - vi2)/(2a).
Instructor Q4 — Find Acceleration
Acceleration is constant; the car moves east until rest. Take east as positive. vi = 10 m/s, vf = 0, d = 25 m. Find the braking acceleration a (in m/s², include sign). Use a = (vf2 - vi2)/(2d).
4/4 — No-Time Equation Mastered!
You now know: vf² = vi² + 2as, the same-|a| braking-distance square law, and when the no-time relation applies. Time to practice!
PRACTICE — The G.U.E.S.S. Method
DOK 2–3 — Apply & Reason🎯 Challenge 1: The Braking Test
A car travels east at 18 m/s and brakes uniformly to rest with signed acceleration −3 m/s², taking east as positive. Find the braking distance in metres.
Step-by-Step Solution
Step 1 — Identify: vᵢ = +18 m/s, vf = 0, a = −3 m/s²; no reversal.
Step 2 — Substitute: 0 = 18² + 2(−3)s, so 6s = 324.
Step 3 — Solve: s = +54 m; braking distance = 54 m.
🎯 Challenge 2: The Westbound Car
A car travels west throughout a straight braking test. Its speed falls uniformly from 24 m/s to 12 m/s while it travels 60 m west. Take east as positive. Find its signed acceleration, in m/s².
Step-by-Step Solution
Step 1 — Identify: vᵢ = −24 m/s, vf = −12 m/s, s = −60 m.
Step 2 — Substitute: a = [(−12)² − (−24)²]/[2(−60)] = (144 − 576)/(−120).
Step 3 — Solve: a = +3.6 m/s² east. Acceleration opposes the westward velocity, so the car slows.
🎯 Challenge 3: Audit the Squared-Velocity Report
A cart initially moves at 12 m/s west with constant acceleration +3 m/s², taking east as positive. Consider its position after 18 m westward displacement, before it first comes to rest. A student reports “speed = 36 m/s and velocity = +36 m/s east, because the squared velocity is positive”. Correct the speed and signed velocity, then explain both errors.
Step-by-Step Solution
Step 1 — Identify: vᵢ = −12 m/s, a = +3 m/s², s = −18 m; before first rest.
Step 2 — Substitute: vf² = (−12)² + 2(3)(−18) = 144 − 108 = 36 m²/s².
Step 3 — Solve: speed = √36 = 6 m/s. The cart is still westbound, so vf = −6 m/s. Squared velocity is not velocity, and its positive square does not determine direction. The +6 m/s branch occurs later, after reversal, at the same position.
CHALLENGE — The Einstein Sequence
DOK 2 — ApplySequence the No-Time Solution
In a straight, uniform braking test, a car initially moves at 14 m/s east and stops after 49 m eastward displacement. Take east as positive. Arrange the linked calculation steps to find its signed acceleration. Select a card then a slot; select a filled slot to return it.
Build the solution in order:
Available steps (shuffled — pick one, then click a slot):
Einstein's Insight — Why Speed Limits Save Lives
In the idealized constant-braking model, dstop = vi²/(2|a|). For the same braking-acceleration magnitude, the speed-squared dependence strongly changes braking distance.
The Physics: If one case has braking distance d at speed v, then under the same |a| the model predicts 4d at 2v and 9d at 3v. These are ratios, not universal real-road distances.
Real stopping distance also includes reaction distance and varies with road, tyres, brakes, weather and driver response, so the simulator should be interpreted as an idealized braking model.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission:
Your 10-year-old younger sibling is in the car with you. They ask: "How can the police figure out how fast that car was going just by measuring the skid marks? They didn't even have a stopwatch!"
Explain how the no-time relation can estimate an earlier speed when the final velocity and a justified constant braking-acceleration model are available. Explain why measuring skid length alone does not determine the speed. Use simple words they can understand.
Type Your Explanation (≥ 3 sentences)
Draw a braking journey and label the given velocities, acceleration direction and displacement. Explain how a squared velocity differs from a signed velocity. Add at least three purposeful strokes. This checks effort; it does not mark the physics.
Cyan pen selected.
10 · THE CREST VAULT DOK 1 — Consolidate
Final reward below
Hidden exam secrets inside — Crest's free notebook.
📓 PHYSICS CREST — Secret Notebook
🛑Mission — The "No Time" Equation: vf² = vi² + 2as
"The Emergency Braking System" 🚗💨🛑
🌍 OVERVIEW: The No-Time Equation
vf² = vi² + 2as; a = (vf² − vi²)/(2s), for s ≠ 0.
|vf| = √(vi² + 2as). Choose velocity’s sign from the motion; squaring removes it.
A negative value under the square root means that endpoint is not reached under the stated model.
For uniform braking to first rest: d = vi²/(2|a|). Same |a|: twice the initial speed gives four times the braking distance.
Braking distance excludes reaction distance. No t in the relation means time is eliminated, not that elapsed time is zero.
The "no time" relation is a one-dimensional constant-acceleration equation. It relates velocity, acceleration and signed displacement without requiring the numerical value of t. It can be derived by eliminating t from the other constant-acceleration relations.
1. The Master Formula
vf² = vi² + 2as
- vf = final velocity (m/s)
- vi = initial velocity (m/s)
- a = acceleration (m/s²)
- s = signed displacement (m)
- NO t! — that's the whole point
2. Stopping Distance (Braking to vf = 0)
When a car brakes to a full stop, vf = 0:
dstop = vi²/(2|a|) for straight braking to rest with the same sign convention
CRUCIAL: For the same braking-acceleration magnitude, idealized braking distance grows with the SQUARE of initial speed.
- Same |a|: double vi (2×) → 4× the braking distance
- Same |a|: triple vi (3×) → 9× the braking distance
- Same |a|: half vi (½×) → ¼ the braking distance
Remember: this square-law comparison assumes the same braking conditions.
3. When to Use the No-Time Equation
Use vf² = vi² + 2as when acceleration is constant and you know vi, vf and s (or a), while t is not needed.
- Idealized skid analysis — estimate a speed when displacement and braking acceleration are modeled
- Braking tests — find deceleration from known vi, vf, d
- Vertical drop: find impact speed from a given height, with uniform gravity and negligible air resistance.
- Straight ramp motion over a known displacement, when net acceleration is constant.
4. Four Useful Kinematic Equations (Master Table)
| # | Equation | Skips | Nickname |
|---|---|---|---|
| 1 | s = ½(vi + vf)t | a (acceleration) | "No Acceleration" |
| 2 | s = vit + ½at² | vf (final velocity) | "No Final Velocity" |
| 3 | vf² = vi² + 2as | t (time) | "No Time" |
| 4 | vf = vi + at | s (displacement) | "No Displacement" |
Each equation listed here omits one variable and assumes constant acceleration.
🚨 CREST EXAM SECRETS
🔑 EXAM TIP: The "Always-Need-Time" Trap
Exams love to give you vi, vf, d — and NO time — to see if you panic.
- The Trap: Students think "I can't solve without t!" and waste time computing t first.
- The Golden Rule: If the model is constant acceleration and your knowns match, use vf² = vi² + 2as directly instead of solving for t first.
⚠️ COMMON MISTAKE: The "Linear Stopping" Myth
Students may assume braking distance scales linearly with speed even when braking conditions are unchanged.
- For the same |a|: idealized braking distance scales with vi² (quadratically).
- Same |a|: 2× speed → 4× braking distance
- Same |a|: 3× speed → 9× braking distance
⚠️ COMMON MISTAKE: Forgetting the Negative Sign
The sign of a depends on your chosen positive direction. If the car moves in the positive direction and slows, a is negative.
- If vi = 20, vf = 0, d = 50: 0 = 400 + 2a(50) → a = -4 m/s² (not +4)
- Here the negative sign confirms acceleration opposite the positive velocity, so the car is slowing.
🧠 MEMORY TRICK: "Squared Speed = Squared Trouble"
- The vf² and vi² are the signature of this equation — easy to spot!
- If you see velocity squared in a kinematic equation, time is missing — you're in the right place.
- "No time? Look for the square!"
🚗 BONUS FACT: How Police Reconstruct Crashes
In an idealized reconstruction, a measured skid displacement together with an appropriate braking-acceleration model can be used with vi² = vf² − 2as to estimate an earlier speed. Real forensic reconstruction requires additional evidence and justified assumptions about road, tyres, brakes and motion.
✅ CREST CHECKLIST (memorize!)
- vf² = vi² + 2as is the constant-acceleration "no time" relation.
- Use when acceleration is constant and your knowns include vi, vf and s (or a); the numerical t is not needed.
- For straight braking to rest with + along the initial motion: dstop = vi²/(2|a|).
- For the same |a|, idealized braking distance scales with vi².
- Same |a|: double speed → 4× braking distance; triple speed → 9×.
- Choose a positive direction first; interpret the sign of a relative to the velocity direction.
- For constant acceleration, choose the relation that matches your knowns and unknown: a, vf, t or s.
- Idealized stop from vf=0: vi = √(2|a|dstop) when the braking model is justified.
- Square roots give a speed magnitude. Choose the signed velocity using the stated direction or stage of motion.
— Crest ✨
"No numerical t needed? Check whether vf² = vi² + 2as matches the constant-acceleration knowns."
Mission 2.5 Complete! · All 10 levels cleared · Physics Crest
You've earned the rank of Master of the No-Time Equation.
vf² = vi² + 2as — mastered. You can now recognize when the constant-acceleration no-time relation is appropriate.