Skip to lesson
PC

PHYSICS CREST

Global Physics Academy

Mission 2.16 · Drag & Terminal Velocity Read the curve, explain the forces
Journey Tracker
Progress
0/10
1

WONDER — The Mystery

Why Does the Falling-Speed Curve Flatten?

The downward-speed record starts steep and gradually flattens. Later, a parachute changes its shape again. How can the gradient change while gravity keeps acting? What can the curve tell us about acceleration and force?

Downward velocityTime0
Reading the diagram: the velocity record begins at rest and gradually flattens; the dashed line marks the limiting speed.

Core model: falling through still air under weight and upward drag, with buoyancy neglected. Use g = 9.8 m/s² and downward positive. The required physics is qualitative drag, force balance and graph interpretation. The lab’s quadratic drag law and its parameter calculations are explicitly illustrative enrichment; they are not a universal law or an additional required syllabus formula.

Today’s Mission: interpret changing gradients, connect measurements to net force, compare mass and geometry fairly, and audit a graph report.

2

PREDICT — Commit to Your Answer

DOK 2 — Predict
🪂

A skydiver is falling at constant downward velocity. A parachute opens and, at the existing speed, drag becomes greater than weight. Which describes the motion immediately after the change?

Drag ↑Weight ↓Down is positivev = +48 m/s ↓
Reading the diagram: arrows identify opposing force directions; labels give the supplied values; lengths are schematic.

Choose the velocity and acceleration behaviour immediately after the change.

Step 1: Pick your answer.

STOP! Before revealing — why did you pick that?

3

▶ PLAY — Quadratic Drag Graph Lab

DOK 2 — Investigate

What you will DO and OBSERVE

  • • DO: set mass, area, air density and starting speed. Choose either drag coefficient or target terminal speed. Play or step through a full record.
  • • OBSERVE: velocity, graph gradient, acceleration and forces share one clock. Change one input at a time to make a fair comparison.
  • • DISCOVER: open or close the model parachute during playback. It changes effective area while preserving velocity and the earlier record.

Downward is positive, g = 9.8 m/s², and buoyancy is ignored. Illustrative quadratic model: drag magnitude D = ½ρC_dAv². Speed is relative to still air; this model is not valid for every flow regime. Time records have no ground or impact. A full finite run from rest approaches exact balance without reaching it. Ordinary setting changes start a new run; parachute changes retain history. Playback is accelerated.

Read the time, velocity, acceleration and force values.

Reading the diagram: green is downward velocity; gold is acceleration. Purple dashes show the current terminal-speed target. Vertical dashes mark area changes. Arrows show the labelled force magnitudes on a schematic object.

Status: Ready

Live Readouts

Time / duration:
Downward velocity:
Weight down:
Drag up:
Signed net force:
Signed acceleration:
Current C_d:
Current area:
Current balancing speed:

Try these experiments

Choose a preset, predict the curves, then press Play. Presets do not start playback or complete the investigation.

4

DISCOVER — The Golden Rules

DOK 1 — Recall

Flip all four cards to connect drag, graph shape and force balance.

📈

Rule #1

Drag opposes relative motion

Click to flip

Drag opposes relative motion

For downward motion through still air, drag points upward. It generally grows with speed. The illustrative lab uses D = ½ρC_dAv², so doubling speed quadruples drag while ρ, C_d and A remain fixed; this scaling is model-specific.

🧭

Rule #2

Balance sets terminal velocity

Click to flip

Balance sets terminal velocity

At terminal velocity, drag equals weight, net force is zero and acceleration is zero. Both forces remain present. In the lab only, v_terminal = √[2mg/(ρC_dA)]. Compare masses only with drag geometry and air conditions fixed.

🔃

Rule #3

Read the gradient

Click to flip

Read the gradient

Velocity–time gradient is acceleration. From rest, a falling object’s downward-positive velocity rises with a decreasing gradient toward a plateau. Starting above the balancing speed gives a decreasing curve with negative gradient; velocity remains downward.

∫

Rule #4

Shape changes the target

Click to flip

Shape changes the target

Increasing effective area reduces the balancing speed. At an existing high speed, increased drag can give upward acceleration while velocity is still downward. The v–t curve stays continuous; its gradient changes. Real deployment takes finite time.

Flip all 4 cards to reveal the rules. 0/4 flipped
5

MISCONCEPTION ATTACK — Destroy the Myths

DOK 2 — Analyze

Choose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.

Myth #1: “A flat velocity–time record for a falling object means its drag force is zero.”

Velocity v / m/st / s005(0,32)(5,32)
Reading the diagram: coordinates are (time / s, v / m/s); straight segments join the points.

Myth #2: “With the same mass and air conditions, increasing the effective drag area makes terminal speed greater.”

Smaller areaLarger areaSame mass, air and drag coefficient
Reading the diagram: the shapes represent different reference areas; all other drag-model parameters are held fixed.
6

THE SECOND 'AHA!' — Instructor Drill

DOK 2 — Apply

Complete two graph multiple-choice and two numerical force questions. Downward is positive and g = 9.8 m/s². Guides appear after an attempt; all four correct answers are required.

Progress
0/4

Your force toolkit

Question progress

Waiting for Q1...

1

Instructor Q1 — Flat Velocity Record

This downward velocity record is flat and above zero. Which statement follows?

Velocity v / m/st / s005(0,36)(5,36)
Reading the diagram: coordinates are (time / s, v / m/s); straight segments join the points.
2

Instructor Q2 — Changing Gradient

An object is released from rest and produces the velocity record shown. How does downward acceleration change?

Downward velocityTime0
Reading the diagram: the velocity record begins at rest and gradually flattens; the dashed line marks the limiting speed.
3

Instructor Q3 — Signed Acceleration

At this instant find the signed acceleration in m/s². Downward is positive.

Drag ↑ = 552 NWeight ↓ = 392 NDown is positiveMass = 40 kgv = +25 m/s ↓
Reading the diagram: arrows identify opposing force directions; labels give the supplied values; lengths are schematic.
m/s²
4

Instructor Q4 — Terminal Drag

A 72 kg object is falling at terminal velocity. Find its drag-force magnitude in N. Use g = 9.8 m/s².

Drag ↑Weight ↓Down is positiveMass = 72 kgv = +38 m/s ↓
Reading the diagram: arrows identify opposing force directions; labels give the supplied values; lengths are schematic.
N
7

✎ PRACTICE — Drag and Graph Evidence

DOK 1–3 — Practice
DOK 1 — Recall

Challenge 1: The Measured Force Snapshot

At this instant a falling object has mass 64 kg, weight 627.2 N downward and drag 403.2 N upward. Find its signed acceleration in m/s². Downward is positive.

Drag ↑ = 403.2 NWeight ↓ = 627.2 NDown is positiveMass = 64 kg
Reading the diagram: arrows identify opposing force directions; labels give the supplied values; lengths are schematic.
m/s²
DOK 2 — Application

Challenge 2: Use the Curved Time Record

An 85 kg skydiver has this measured velocity–time record after a parachute opens. Downward is positive. Find the signed average resultant force over the interval from 0 to 4 s, in newtons. The mass stays constant.

Downward velocity / (m/s)(0 s, 50 m/s)(4 s, 30 m/s)004Time / s
Reading the diagram: the measured curved record joins the labelled endpoints; the downward-positive velocity stays positive.
N
DOK 2–3 — Error analysis

Challenge 3: Audit the Graph Report

At the shown instant just after an area change, an 80 kg skydiver has downward velocity +40 m/s, weight 784 N down and drag 1584 N up. Downward is positive. A student writes: “Opening the parachute makes velocity jump instantly to the new terminal speed. A negative v–t gradient means the skydiver is already moving upward. When the v–t curve becomes flat, drag is zero.” Find the signed resultant force and acceleration at this instant. Explain all three errors.

Drag ↑ = 1584 NWeight ↓ = 784 NDown is positiveMass = 80 kgv = +40 m/s ↓
Reading the diagram: arrows identify opposing force directions; labels give the supplied values; lengths are schematic.
8

☷ CHALLENGE — Rebuild the Falling Record

DOK 2 — Apply
🚴

Six Linked Steps from a Snapshot to a Plateau

An early snapshot shows a 65 kg object falling downward with weight 637 N down and drag 182 N up. Its shape and air conditions then stay fixed, with drag increasing with speed. Downward is positive. Arrange six linked steps connecting this snapshot to the later terminal plateau. Select a card, then a slot; select a filled slot to return it.

Drag ↑ = 182 NWeight ↓ = 637 NDown is positiveMass = 65 kgv = +18 m/s ↓
Reading the diagram: arrows identify opposing force directions; labels give the supplied values; lengths are schematic.

Build the solution in order:

Step 1
Step 2
Step 3
Step 4
Step 5
Step 6

Available steps (shuffled — pick one, then click a slot):

9

TEACH — The Feynman Technique

DOK 3 — Teach

Your Final Mission: your cousin says a flat falling-speed graph means gravity switched off. Use the graph and forces to teach what actually happens.

Explain the changing gradient during a fall, the terminal plateau, and the continuous velocity when a parachute changes the gradient. Type at least three short sentences, or draw a labelled explanation with at least three purposeful strokes. Exact keywords are not required.

Type Your Explanation (≥ 3 sentences)

Final reward below

Hidden exam secrets inside — Crest's private notebook.