Skip to lesson
PC

PHYSICS CREST

Global Physics Academy

Mission 2.14 · Free Fall Graphs Gravity keeps changing velocity
Journey Tracker
Progress
0/10
1

WONDER — The Mystery

The Ball That Turns While Gravity Keeps Acting

A ball slows while rising, stops for an instant and speeds up while falling. How can a curved height trace, a straight velocity trace and a flat acceleration trace all describe this motion?

Height y / mt / s004
Reading the diagram: coordinates are (time / s, y / m); the trace is smooth.
Velocity v / m/st / s004(0,19.6)(4,-19.6)
Reading the diagram: coordinates are (time / s, v / m/s); straight segments join the points.
Acceleration a / m/s²t / s004(0,-9.8)(4,-9.8)
Reading the diagram: coordinates are (time / s, a / m/s²); straight segments join the points.

Model for every numerical question: near-Earth vertical free flight, no air resistance, constant g = 9.8 m/s². g is a positive magnitude; upward is positive, so a = −g. Height y is measured above ground. The example starts at ground level with v₀ = +19.6 m/s and ends just before impact. Launch, support, catch and impact are outside the free-flight interval.

Today’s Mission: connect height, velocity and acceleration graphs; find rise, height, travel and impact values; explain why zero velocity does not make gravity disappear.

2

PREDICT — Commit to Your Answer

DOK 2 — Predict
⚽

A ball has been released after an upward throw and reaches its highest point. Air resistance is negligible. Upward is positive. Which velocity–acceleration pair applies at that instant?

v₀ = 14 m/sy₀ = 8 mGround: y = 0Up is +
Reading the diagram: launch height is measured above the ground; the velocity and clock labels supply the givens; this scene is schematic.

Choose the pair at the highest point of free flight.

Step 1: Pick your answer.

STOP! Before revealing — why did you pick that?

3

▶ PLAY — Free Flight Graph Lab

DOK 2 — Investigate

What you will DO and OBSERVE

  • • DO: set height and signed launch velocity, or set the desired upward rise. Set g, then play or step through the entire flight. Scrub to inspect an instant.
  • • OBSERVE: the vertical ball and three graphs share one clock. Height stays non-negative until impact; velocity can be negative while the ball remains above ground.
  • • DISCOVER: compare rise with height above ground, and displacement with distance. Inspect the turning point with the Top button.

Upward is positive; y = 0 is ground. Gravity alone acts during flight, with constant positive magnitude g. Earth presets use 9.8 m/s²; other values explore an illustrative uniform gravitational field. Calculated controls are disabled and labelled. Playback is accelerated. The endpoint shows values just before contact; impact forces and rebound are excluded.

Follow the height, velocity, acceleration and time readouts.

Reading the diagram: cyan is height, green is velocity, gold is acceleration. Grey dashes show the planned flight. White dashes on y–t show the current tangent; purple marks the top of an upward throw. Shaded v–t regions show signed displacement. The lower scene shows the actual vertical path on a fixed height scale for this run.

Status: Ready

Live Readouts

Elapsed / flight time:
Height above ground:
Signed velocity:
Free-flight acceleration:
Planned rise above launch:
Planned greatest height:
Turning-point time:
Signed displacement so far:
Distance so far:
Velocity just before impact:

Try these experiments

Choose a preset, predict the graphs and impact, then press Play. Presets do not start playback.

4

DISCOVER — The Golden Rules

DOK 1 — Recall

You've played with the Free Fall Graph Lab. Now flip each card to reveal the four golden rules for free fall motion graphs.

📈

Rule #1

Launch and Graph Shapes

Click to flip

Shapes depend on the launch

During constant-g free flight, y–t is concave downward, v–t is a straight line of gradient −g, and a–t is flat at −g. Only an upward launch has a future peak; a drop or downward launch descends immediately.

🧭

Rule #2

Direction and Signs

Click to flip

Signs are a choice

Here g > 0 and upward is positive, so a = −g. On descent v < 0, while height above ground can remain positive. Choosing downward positive changes signs, not the physical motion.

🔃

Rule #3

Top and Contact

Click to flip

Top is still free flight

For an upward throw, v = 0 at the top and acceleration remains −g. Greatest height = launch height + rise. At ground contact other forces act; launch, impact and rebound are outside this airborne model.

∫

Rule #4

Signed Areas

Click to flip

Areas and travel

Signed v–t area gives displacement; add the starting height to recover height above ground. Add area magnitudes for distance. Signed a–t area gives Δv = −gt. Returning to launch height gives zero displacement, not zero travel.

Flip all 4 cards to reveal the rules. 0/4 flipped
5

MISCONCEPTION ATTACK — Destroy the Myths

DOK 2 — Analyze

Choose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.

Myth #1: “Negative acceleration means a free-falling ball is slowing down throughout its entire flight.”

Velocity v / m/st / s003(0,14.7)(3,-14.7)
Reading the diagram: coordinates are (time / s, v / m/s); straight segments join the points.

Myth #2: “The curved height–time trace means the vertically thrown ball follows a curved spatial path.”

Height y / mt / s003
Reading the diagram: coordinates are (time / s, y / m); the trace is smooth.
6

THE SECOND 'AHA!' — Instructor Drill

DOK 2 — Apply

Answer four independent free-flight questions. Use g = 9.8 m/s² and upward positive. Get all four correct; guides appear after an attempt.

Progress
0/4

Your free-flight toolkit

Question progress

Waiting for Q1...

1

Instructor Q1 — Speed During Descent

A ball starts 20 m above ground and has this free-flight velocity record. On its descending part, what happens to speed?

Velocity v / m/st / s003(0,9.8)(3,-19.6)
Reading the diagram: coordinates are (time / s, v / m/s); straight segments join the points.
2

Instructor Q2 — Velocity from Acceleration

A ball is dropped from rest at 40 m. Its acceleration record is shown for the first 2 s. Which describes its velocity–time graph?

Acceleration a / m/s²t / s002(0,-9.8)(2,-9.8)
Reading the diagram: coordinates are (time / s, a / m/s²); straight segments join the points.
3

Instructor Q3 — Compute Signed Velocity

A ball is released from rest at 60 m and remains airborne for the first 2.5 s. Find its signed velocity at 2.5 s in m/s.

v₀ = 0 m/sy₀ = 60 mGround: y = 0Up is +Later: t = 2.5 s
Reading the diagram: launch height is measured above the ground; the velocity and clock labels supply the givens; this scene is schematic.
m/s
4

Instructor Q4 — Rise Above Launch

A ball is thrown upward from a 6 m ledge at +14.7 m/s. Find its rise above the launch point when it reaches the top, in metres.

v₀ = 14.7 m/sy₀ = 6 mGround: y = 0Up is +
Reading the diagram: launch height is measured above the ground; the velocity and clock labels supply the givens; this scene is schematic.
m
7

✎ PRACTICE — Free Flight Evidence

DOK 1–3 — Practice
DOK 1 — Recall

Challenge 1: The Released Ball

A ball is released from rest at a height of 35 m. Find its signed velocity after 1.8 s, while it is still airborne, in m/s. Use g = 9.8 m/s² and upward positive.

v₀ = 0 m/sy₀ = 35 mGround: y = 0Up is +Later: t = 1.8 s
Reading the diagram: launch height is measured above the ground; the velocity and clock labels supply the givens; this scene is schematic.
m/s
DOK 2 — Application

Challenge 2: Just Before Impact

A ball is thrown upward from a 12 m ledge with initial velocity +18 m/s. Find its signed velocity just before it reaches the ground, in m/s. Use g = 9.8 m/s² and upward positive; neglect air resistance.

v₀ = 18 m/sy₀ = 12 mGround: y = 0Up is +
Reading the diagram: launch height is measured above the ground; the velocity and clock labels supply the givens; this scene is schematic.
m/s
DOK 2–3 — Error analysis

Challenge 3: Audit the Ledge Report

A ball starts at a height of 24.5 m. Its straight velocity–time record joins (0 s, +19.6 m/s) and (5 s, −29.4 m/s); the endpoint is just before ground impact. Upward is positive. A student writes: “At the top at 2 s its acceleration is zero. Negative velocity after 2 s means negative height. The positive v–t area is 19.6 m, so its greatest height above ground is 19.6 m.” Find the greatest height above ground and total distance travelled by 5 s, then explain all three errors.

Velocity v / m/st / s005(0,19.6)(5,-29.4)
Reading the diagram: coordinates are (time / s, v / m/s); straight segments join the points.
8

☷ CHALLENGE — Rebuild the Ledge Flight

DOK 2 — Apply
🚴

Six Steps from Launch to Impact

A ball leaves a 14.7 m ledge with upward velocity +9.8 m/s. Use g = 9.8 m/s², upward positive and negligible air resistance. Arrange six linked steps from launch through the top to ground impact. Select a card, then a slot; select a filled slot to return it.

v₀ = 9.8 m/sy₀ = 14.7 mGround: y = 0Up is +
Reading the diagram: launch height is measured above the ground; the velocity and clock labels supply the givens; this scene is schematic.

Build the solution in order:

Step 1
Step 2
Step 3
Step 4
Step 5
Step 6

Available steps (shuffled — pick one, then click a slot):

9

TEACH — The Feynman Technique

DOK 3 — Teach

Your Final Mission: your younger sibling says that gravity switches off when a thrown ball stops at the top. Teach how the three graphs show what actually happens.

Distinguish zero velocity from acceleration, explain negative velocity during descent, and separate rise from height above ground. Type at least three short sentences, or draw a labelled explanation using at least three purposeful strokes. Exact keywords are not required.

Type Your Explanation (≥ 3 sentences)

Final reward below

Hidden exam secrets inside — Crest's private notebook.