Skip to lesson

PHYSICS CREST

Global Physics Academy

Mission 2.13 · Motion Graph Analysis Three graphs, one motion
Journey Tracker
Progress
0/10
1

WONDER — The Mystery

Three Graphs, One Ball

A ball moves up, slows, turns and falls. The same motion looks curved on a position graph, straight on a velocity graph and flat on an acceleration graph. How can all three pictures be correct?

Position x / mt / s004
Reading the diagram: coordinates are (time / s, x / m); the trace is smooth.
Velocity v / m/st / s004(0,8)(4,-8)
Reading the diagram: coordinates are (time / s, v / m/s); straight segments join the points.
Acceleration a / m/s²t / s004(0,-4)(4,-4)
Reading the diagram: coordinates are (time / s, a / m/s²); straight segments join the points.

Model: one-dimensional motion, upward positive, x measured from a fixed origin. The diagrams use illustrative constant acceleration −4 m/s², not Earth’s gravity. A real free-flight toss near Earth has a ≈ −9.8 m/s² if air resistance is negligible; launch and catch are outside that free-flight model.

Today’s Mission: read instantaneous velocity and acceleration from gradients; read displacement and velocity change from signed areas. Recover final values using starting values, and distinguish a stop, a turn and an origin crossing.

2

PREDICT — Commit to Your Answer

DOK 2 — Predict
📐

A straight velocity–time line falls from (0 s, +12 m/s) to (4 s, +4 m/s). Right is positive. What does the corresponding position–time trace do during this interval?

Velocity v / m/st / s004(0,12)(4,4)
Reading the diagram: coordinates are (time / s, v / m/s); straight segments join the points.

Choose the position–time behavior over the same interval.

Step 1: Pick your answer.

STOP! Before revealing — why did you pick that?

3

▶ PLAY — Motion Graph Trio Lab

DOK 2 — Investigate

What you will DO and OBSERVE

  • • DO: set a starting position, two velocity values and a duration, or set acceleration instead of the final velocity. Complete a non-zero run.
  • • OBSERVE: one time marker moves through all three graphs. Watch the tangent and both signed areas.
  • • DISCOVER: compare crossing the origin with stopping, and zero velocity with zero acceleration.

Right is positive; x is a coordinate from a fixed origin. Each run has constant acceleration. Choose the given quantities; calculated controls are disabled and labelled. Playback is accelerated; t is physical time. Switching modes resets the run.

Follow the position, velocity, acceleration and signed-area readouts.

Reading the diagram: cyan is position, green velocity, gold acceleration. Grey dashes show the plan. White dashes on x–t are the current tangent. Pale green and red areas on v–t mark positive and negative displacement; the a–t area gives velocity change. The lower track uses a fixed metre scale for this run; gold marks the origin.

Status: Ready

Live Readouts

Elapsed / total:
Position:
Velocity / x–t gradient:
Acceleration / v–t gradient:
Signed a–t area Δv:
Signed v–t area Δx:
Distance so far:
Turn within plan:

Try these experiments

Choose a preset, predict the trio, then press Play. Presets do not start playback.

4

DISCOVER — The Golden Rules

DOK 1 — Recall

You've played with the Trio Lab. Now flip each card to reveal the four golden rules of motion-graph analysis.

🔗

Rule #1

The Graph Chain

Click to flip

Gradients give rates

Instantaneous velocity is the tangent gradient of x–t. Instantaneous acceleration is the tangent gradient of v–t. A straight segment has a constant gradient. Read the axes and their units first.

📐

Rule #2

Area Integration

Click to flip

Areas give changes

Signed a–t area gives Δv; add the initial velocity to get the final velocity. Signed v–t area gives Δx; add the initial position to get the final position. Below the time axis contributes negatively.

⛰️

Rule #3

Turning Points & Intercepts

Click to flip

Stops and turns

At a smooth x–t peak or valley, v = 0. A turn requires a velocity sign change. Merely touching v = 0 need not mean a turn. Crossing x = 0 reaches the fixed origin, which need not be the start.

⚠️

Rule #4

Speed and Acceleration

Click to flip

Speed and acceleration

Speed is |v|. When v and a have the same sign, speed increases; opposite signs make speed decrease. At a turn, v can be zero while a is non-zero. A constant negative acceleration can eventually increase speed.

Flip all 4 cards to reveal the rules. 0/4 flipped
5

MISCONCEPTION ATTACK — Destroy the Myths

DOK 2 — Analyze

Pick TRUE or FALSE for each myth. A wrong answer gives feedback and a retry; only a correct answer counts as completion.

Myth #1: “Whenever velocity is zero, acceleration must also be zero.”

Velocity v / m/st / s006(0,9)(6,-9)
Reading the diagram: coordinates are (time / s, v / m/s); straight segments join the points.

Myth #2: “Signed area under a velocity–time graph always equals total distance travelled.”

Velocity v / m/st / s003(0,3)(3,-3)
Reading the diagram: coordinates are (time / s, v / m/s); straight segments join the points.
6

THE SECOND 'AHA!' — Instructor Drill

DOK 2 — Apply

Answer four graph questions. Each figure supplies the data; get all four right to unlock practice. Guides appear after an attempt.

Progress
0/4

Live Graph for Current Question

Current Question Scenario

Waiting for Q1...

1

Instructor Q1 — Gradient of a Flat Velocity Line

The straight velocity–time segment is horizontal below zero. What is its acceleration?

Velocity v / m/st / s004(0,-5)(4,-5)
Reading the diagram: coordinates are (time / s, v / m/s); straight segments join the points.
2

Instructor Q2 — Area of an Acceleration Record

What does the signed area of this acceleration–time record give over 0–4 s?

Acceleration a / m/s²t / s004(0,3)(4,3)
Reading the diagram: coordinates are (time / s, a / m/s²); straight segments join the points.
3

Instructor Q3 — Compute Signed Acceleration

A straight velocity–time segment joins (1 s, +12 m/s) and (5 s, −4 m/s). Find the signed acceleration in m/s².

Velocity v / m/st / s005(1,12)(5,-4)
Reading the diagram: coordinates are (time / s, v / m/s); straight segments join the points.
m/s²
4

Instructor Q4 — Compute Displacement

A straight velocity–time segment joins (0 s, +10 m/s) and (5 s, 0 m/s). Find the displacement over 0–5 s in metres.

Velocity v / m/st / s005(0,10)(5,0)
Reading the diagram: coordinates are (time / s, v / m/s); straight segments join the points.
m
7

✎ PRACTICE — Audit the Graph Chain

DOK 1–3 — Practice
DOK 1 — Recall

Challenge 1: Read the Velocity Record

A straight velocity–time segment joins (2 s, +14 m/s) and (8 s, +2 m/s). Right is positive. Find the signed acceleration in m/s².

Velocity v / m/st / s008(2,14)(8,2)
Reading the diagram: coordinates are (time / s, v / m/s); straight segments join the points.
m/s²
DOK 2 — Application

Challenge 2: Recover the Final Velocity

At t = 1 s an object has velocity −2 m/s. Its acceleration is +4 m/s² from 1 to 3 s, zero from 3 to 5 s, and −1 m/s² from 5 to 8 s. Right is positive. Find its velocity at 8 s in m/s.

Acceleration a / m/s²t / s00840-1135
Reading the diagram: horizontal strips show constant acceleration over their labelled time intervals; dashed joins mark changes.
m/s
DOK 2–3 — Error analysis

Challenge 3: Audit the Motion Report

A straight velocity–time line joins (0 s, +6 m/s) and (6 s, −6 m/s). Right is positive; the initial position is +4 m relative to a fixed origin. A student writes: “At 3 s the object is at rest, so its acceleration is zero. The two signed areas cancel, so both its total distance and final position are zero.” Find the total distance and final position at 6 s, then explain all three errors.

Velocity v / m/st / s006(0,6)(6,-6)
Reading the diagram: coordinates are (time / s, v / m/s); straight segments join the points.

Explanation marking uses an indicative text rubric, not a complete semantic assessment. Compare your submitted reasoning with the worked solution or a teacher.

8

☷ CHALLENGE — Rebuild the Graph Chain

DOK 2 — Apply
🚴

From Acceleration to Final Position

The a–t record shows +2 m/s² from 0 to 4 s. The object starts with v₀ = −3 m/s at x₀ = +2 m. Right is positive. Arrange six linked steps that recover the velocity graph and final position. Select a card, then a slot; select a filled slot to return it.

Acceleration a / m/s²t / s004(0,2)(4,2)
Reading the diagram: coordinates are (time / s, a / m/s²); straight segments join the points.

Build the solution in order:

Step 1
Step 2
Step 3
Step 4
Step 5
Step 6

Available steps (shuffled — pick one, then click a slot):

9

TEACH — The Feynman Technique

DOK 3 — Teach

Your Final Mission: your younger sibling sees three different motion graphs for one ball. Explain how gradients and signed areas connect them, and why the starting values matter.

Teach why a ball can have zero velocity while its acceleration remains non-zero. Type at least three short sentences, or draw a labelled explanation using at least three purposeful strokes. Exact keywords are not required.

Type Your Explanation (≥ 3 sentences)

Final reward below

Hidden exam secrets inside — Crest's private notebook.